WORKS CONTRACT FOR VALAYAPATTY SUB DIVISION FOR CAPITAL,IMPROVEMENT AND OTHER WORKS

EXCAVATION OF POLE PITS / Stay Set:

Excavation of pole pit upto 27' (8.0 m) Pole by using JCB or manual

Excavation of pole pit above 8.0 Mtr pole PSC/RCC/RSJ pole by using JCB or manual

Stay pit 4.5' to 5' depth by using JCB or manual

Hard rock without blasting (where houses are located)

ERECTION OF POLES AND ACCESSORIES

PSC/ RCC poles/Metal poles upto 8.00m. (27') by using JCB or manual

PSC/ RCC poles/Metal poles above 8.00m by using JCB ormaual

Erection of stay set complete

Fixing of Line Materials

HT "V" cross arms (all types) / Channel cross arms/ Guarding Cross arms

LT 3 phase cross arms

LT Single phase cross arms

HT/LT TI Fittings

Fixing of Aluminium Knob

Fixing of HT pin Insulators 22 KV

Fixing of HT 22 KV strain disc.

Fixing of LT pin Insulator

Fixing of LT shackle

Re-sagging of HT/LT lines

Re-sagging ACSR 7/3.35mm / AAAC 3.15 mm Rabbit conductor

Re-sagging ACSR 7/2.59 mm / AAAC 2.50 mm Weasel and ACSR 7/2.11 mm conductor

SERVICE ERECTED:

Releasing of single phase service and re-fixing.

Releasing of 3 phase service and (upto 50 HP) re-fixing.

LOADING AND UNLOADING CHARGES:

Loading of poles upto 8.0 M/ 27'

Loading of poles above 8.0 M

Transport of poles/Materials/ conductors and other materials (excluding loading and unloading charges.)

Below 8 Kms (Plains)

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual up to 100 m

Dismantling Charges

Dismantling of PSC/RCC upto pole 8.00m(27')

Dismantling of PSC/RCC & above 8.00m

Dismantling of 3ph xarm

Dismantling of LT Pin insulator

Dismantling of LT shackle

Dismantling of Aluminium knob

Lathe Works

Labour charges for alteration of Back Clamps/ Stay Clamps to suit for the works

Drilling of hole in channel only 3/4" & 1"

Cutting of channel

DT/ DP erection

Erection of Transformer structure complete in all respects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pits with collar including painting of metal parts, structure poles, fixing of top channel, seating channel, belting angle including concreting (Except erection of Transformer) (Annexure II)

Erection of Single Pole Transformer structure complete in all respects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pit with collar including painting of metal parts, structure poles, fixing of tapping channel, transformer bed structure including concreting (Except erection of Transformer)(Annexure III)

Erection of D.P. structure with AB switch, top channel, cross bracing, earthing, painting, providing stay including concreting (Annexure IV)

Paving of HT/LT Lines

ACSR 7/3.35mm / AAAC 3.15mm Rabbit Conductor

ACSR 7/2.59mm / AAAC 2.50mm Weasel and ACSR 7/2.11 mm conductor

MISCELLANEOUS WORKS

Clearing of branches of trees

JAYA CONTRACTOR

PAPPA CONTRACTOR

NAAVAL ELECTRICAL DEVELOPER