8322 SPECIAL REPAIRS TO BLDG No. 12 POWD AND PROVN OF CERTAIN MINOR / REVENUE WORKS IN NEW / OLD CH (SC) PUNE AND ADDN / ALTN OF EXHAUST FANS IN KITCHEN OF TYPE-II QTRS AT DAD COMPLEX UNDER GE SOUTH PUNE

Amount

Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and directed

Dismantling battens for tiles shingles etc of any size including tiling fillets exc 15 cm spacing etc complete all as specified

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Dismantling timber scantling in any position (unframed wok) exc 40sqcm in section complete all as specified and directed.

Dismantling boarding, any description, fixed in any positionwith nails complete all as specified and as directed.

Dismantling timber scantling unframed in post, rafters, purlins etc under 40 Sqcm in section complete all as specified

S&F, IInd class hard wood timber clean sawn as in scantling complete all as specified and as directed.

S&F second class HW clean sawn battens at 25 cm centres of section exc 5 Sqcm and not exc. 15 Sqcm complete all as specified and as directed.

Fixing only IInd Class HW clean sawn battens at 30cm centres exc. 5 and n.exc. 15 Sqcm (Except batten) complete all as specified and as directed.

M&L for Filleting section exc 25 but not exc 50 Sqcm in any position and to any shape in cementlime mortar 1:4 including all mitres, stops, etc. complete all as specified and as directed.

M&L for Weather boarding, II nd class HW clean sawn, thickness 20mm . to 25 and rebated on thick edge to give 20mm laps and fixed to wooden/ steel member including two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for

M&L for PCC using 1 : 2 : 4 type B-1 using 20mm graded stone aggregate, in slab supported on walls.

Use and waste of form work to soffits of the suspended slab such as roof slabs, floor slabs, landing and similar work etc, for flat rough finished surfaces of concrete.

S & F MS TMT bars 10mm dia and over, cut to length, bent to shape reqd, including cranking, bending spirally for hooping for columns and binding with mild steel annealed wire of dia not less than 0.9 mm or securing with clips complete all as specified and directed .

S&F MS TMT bars 5mm dia and over upto & including 10mm dia, cut to length, bend to shape as required including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers, binders

Dismantling wall and ceiling boards, any thickness, including cover fillets complete all as specified and directed.

S&F for Gypsum ceiling board for ceiling of approved pattern finish 595x595x9 to 9.5mm thick in size of approved brand/make, laid over and including grid work of size 600x600mm, made out of 0.5mm thick GI tee 32x24mm for main, 25x24mm for cross tee and 20x20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle, hung from ceiling using 2mm thick GI suspension wires spaced at 1200mm on main runners including making niches for fans/light at as specified and directed

M&L for roof tiles, Mangalore pattern, gde 'AA', interlocking at side joints, laid dry complete all as specified and as directed

Fixing only for roof tiles Mangalore pattern interlocking at side joints laid dry (except tiles) complete all as specified and as directed

M&L for Ridge or hip tiles to suit Mangalore pattern roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and as directed

Fixing only ridge or hip tiles to suit Mangalore pattern roofing tiles.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick , 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / ridgesl, fixed with self tapping screws complete all as specified and directed.

S&F for rolled mild steel conforming to grade E-250 (Fe-410W, quality A) as in main and cross beams, hip and jack rafters, purlins, where connected to common rafters and running rails and guides for sliding doors, fixed with angle clips or other connecting plates complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

Dismantling of wrought or MS work of any description etc complete all as specified and as directed.

M&L for Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

Disconnecting existing tank of capacity not exc 1000 ltr setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting & refixing in position (cleaning, repairing etc measured separately) complete all as specified and directed. (Note :- The rates shall deemed to be inclusive of necessary temporary arrangements for un interrupted water supply to users)

S&F of rotational moulded polythene water storage tanks of double layeers (cylindrical vertical with closed top) hoisted and fixed in position including locking arrangement device complete all as specified and directed for the 1000 litres

Demolition of brick/PCC block/stone masonary built in cement mortar complete all as specified and directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone agg as in coping on top of wall, bed blocks and the like inculding weathering , slightly rounded or chamfered angles and throating as directed by Engr-in-Charge including use of necessary form work complete all as specified and directed.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on brick / concrete surfaces using water proofing compound as per manufacturers instruction finished with sponge finish complete all as specified and directed (NOTE : WPC shall be measured and paid seperately)

Supply only integral water proofing compound complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on brick/concrete surfaces finished even & smooth complete all as specified and directed

Preparation of new plastered surfaces and applying two coats of exterior emulsion paint over a coat of primer paint complete all as specified and as directed.

Preparation of old plastered surfaces and applying two coats of exterior emulsion paint over a coat of primer paint complete all as specified and as directed.

Preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

Preparation of old painted surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

Preparation of old wooden surfaces of any description, not otherwise described, over 10cm girth and applying two coats of synthetic enamel paint over acoat of pimer complete all as specified and as directed.

M&L for crosote oil Tiles or slate battens, any size and spacing, prepared and treated all over (measured overall on one side only, spaces not deducted) complete all as specified and as directed.

Taking down chowkats or frames of wooden or steel or aluminium not exc 1.5 sqm (without taking off shutters from frames) complete all as specified and directed.

Taking down chowkats or frames of wooden or steel or aluminum exc 1.5 sqm and not exc 4 sqm (without taking off shutters from frames) complete all as specified and directed.

Taking down Shutters of anydescription n exc 1 sq. m each complete all as specified and as directed.

Taking down Shutter from frame exc 1 sqm and not exc 2 sqm and refixing in the same opening after easing and adjusting complete all as specified and directed.

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S & F ventilators/louvers using 4mm thick x 10cm wide froasted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :- (a) SP : 20048 (b) Glazing clips : 19352

S&F anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Sheet glass, 4mm thick tinted glass ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge.

S&F butt hinges 100mm size stainless steel medium weight complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed.

S&F aluminium handles, anodised, cast type, of size 150mm complete all as specified and directed.

S&F aluminium powder coated fancy type curtain rod 20mm bore all as specified and directed by Engr-in-Charge.

S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed by Engineer-in-Charge.

S&F sheet glass ordinary quality 5mm thick and glazing with oil putty or wooden beads in square n exc 0.50 sqm in each pane complete all as specified and directed.

M & L for 12 mm thick perlaminated particle board, exterior graded, prelaminated both side with decorative choice lamination fixed with screws to aluminum frame in repair including locking arrangementscomplete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm and not exc 20cm girth complete all as specified and directed.

Taking up or down carefully steel tubing and connections including cleaning for refixing complete all as specified and directed of following sizes :-

15mm bore

20mm bore

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc complete all as specified and directed of the following sizes :-

15mm bore

20mm bore

25mm bore

S&F in repairs Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed of following bore of pipe :-

20 mm bore

25 mm bore

S&F in repairs 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified & directed.

Dismantling of drain pipes AC /CI/PVC pipes of various dia jointed in CM or adhesive 75 to 110mm dia complete all as specified and as directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall/ceiling or laid in trenches of size 110mm bore incl all necessary fittings complete all as specified and as directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall/ceiling or laid in trenches of size 75mm dia incl all necessary fittings complete all as specified and as directed.

S & F in repairs vitreous china wash hand basin, white bowl type of size 450mm including 15mm dia CP pillar tap, PVC waste coupling 32mm, chain and plug and PVC waste pipe, PVC connection 45cm long including fixing on granite complete all as specified and directed.

S & F in repairs, vitreous china wash down water closet pan "Pedestal" coloured including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc complete all as specified and direcrted.

S&F in repairs PVC low level flushing cistern 10 litres capacity make ISI or equivalent including all internal fitting, pair of brackets, including inlet/ outlet PVC pipe connections etc complete all as specified and directed.

Cutting chases through brick / PCC block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting n.exc. 10cm girth.

S&F in repairs Wall mixer 3-in-1 including telephone shower for 15mm bore of pipe conforming to CAT No CON-CHR-281KN of "Jaquar" or Equivalent make of MARC / Ess Ess /Plumber complete all as specified and as directed.

S&F in repairs Bib taps CP 15mm bore fancy type conforming to CAT No ARI-CHR-39037 of "Jaquar" or Equivalent make of MARC / Ess Ess /Plumber complete all as specified and as directed.

S&F in repairs CP towel rail 20mm dia and 600mm long including brackets conforming to CAT No ACN-CHR-1111N of "Jaquar" or Equivalent make of MARC / Ess Ess /Plumber

S&F CP toilet paper holder confirming to CAT No ACN-CHR-1151N of "Jaquar" or Equivalent make of MARC / Ess Ess /Plumber complete all as specified and as directed.

S&F CP Soap dish confirming to CAT No ACN-CHR-1131N of "Jaquar" or Equivalent make of MARC / Ess Ess /Plumber complete all as specified and as directed.

S&F Corner glass shelves with brackets CAT No ACN-CHR-1173 of "Jaquar" or Equivalent make of MARC / Ess Ess /Plumber complete all as specified and as directed.

S&F in repairs CP shower rose 125mm dia with arms for 15mm bore of pipe conforming to CAT No OHS-489 of "Jaquar" or Equivalent make of MARC / Ess Ess /Plumber

S&F in repairs Two way Bib taps CP 15mm borefancy type conforming to CAT No. ARI-CHR-39041 of "Jaquar" or Equivalent make of MARC / Ess Ess /Plumber complete all as specified and as directed.

S&F in repairs CP towel ring square conforming to CAT No. ARI-CHR-1121 N of "Jaquar" or of or Equivalent make of MARC / Ess Ess /Plumber complete all as specified and as directed.

S&F in repairs CP 15mm bore concealed stop cock with long neck conforming to CAT No. ARI-CHR-39089 of "Jaquar" or of Equivalent make of MARC / Ess Ess /Plumber complete all as specified and as directed.

S&F in repairs CP health faucet (ABS body) with 1 mtr long PVC type & wall hook conforming to CAT No. ALD-CHR-565GA of "Jaquar" or of Equivalent make of MARC / Ess Ess /Plumber

Dismantling stone slabs/tiles of any description or thickness laid bedded & pointed in cement mortar in floors, hard standing, Apron etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, 25mm average thickness leveling course as in padding concrete complete all as specified and directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 20mm thick screed bed in CM (1:4) etc complete all as specified and directed by Engineer-in-Charge.

M&L for coloured double charged vitrified tiles 800 x 800 x 8 to 10mm thick as in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 20mm thick screed bed in CM (1:4) complete all as specified and directed.

All as per item No. 87.00 above but in skirting 800x100x8mm over 10mm thick CM (1:4) complete all as specified and as directed.

S & F for Granite 16 to 18mm thick, machine cut (of any type) work (table rubbed and polished) in steps, kambs, pillars, window cills, cooking platforms and like in 10mm thick screed bed cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for 300x600mmx5.5 to 6mm thick coloured glazed ceramic tiles in dado/skirting , laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10 mm thick CM (1:3) backing coat including triangular filleting on top in CM 1:4 complete all as specified and directed.

Rounding edges of stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) 75mm thick laid in alternate bays including finishing the surfaces even and sooth using extra cement as in plinth protection, PCC path complete all as specified and directed.

M&L for Excavation for post holes (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or brocken rubble mixed with earth around, in layers not exceeding 25 cm for Hard / Dence soil complete all as specified and directed.

M&L for Plain Cement Concrete type D2, 1:4:8 (40mm graded aggregate) as in foundation filling or in mass concrete complete all as specified and as directed.

S&F Base Plate (Plain or chamfered ) vesels, square cut or notched ordianry and counter sunk cutting holes, with riveted, bollted, or wolded attachment.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundations, and getting out in in hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soil complete all as specified and as directed.

Removal of excavated material / soil n exc 50 m and depositing where directed at a level n exc. 1.5m above the starting point.

M&L for rendering 15mm thick in CM(1:6) on fair faces of brick well finished even & smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

M&L for Plain Cement Concrete type B2 1:2:4 (20mm graded aggregate) as in Coping for brick work, side benching complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cycle stand locking device and similar work conforming to Fe.290.Gde-E-165

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring complete;

M&L for PCC 1:2:4 type B-1, (using 20mm graded stone aggregate) of 40 mm thick, laid in alternate bays including spike rolling to surface or making impression of expanded metal while the conc is green .

M&L glass dividing strips 3 mm thick and 28 mm width as in flooring complete all as specified and as directed.

Surface excavation in soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and as directed.

M&L for 150mm thick Hardcore using broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed.

M&L for precast inerlocking paver blocks glossy finish with any shape and size conforming to IS-15658-2006, 60mm thick M-35 grade with grey cement and pigment laid over complete all as specified and as directed

M&L for 25mm thick sand cushioning under interlocking tiles complete all as specified and as directed

M&L for Pre-cast cement concrete (Type B1, 1:2:4 using 20mm graded aggregate) block masonry with solid blocks exc. 10 cm in width and setting in cement mortar (1:6), complete complete all as specified.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces and finish the surface fair and even without using extra cement including two coats of exterior emulsion after preparation of surface complete all as specified

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc or for shafts, wells cess pita, man holes pier holes etc not exceed 10 Sqm on plan and not excced 1.5 mtr in depth and getting out in soft / loose soil complete all as specified and directed

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

Extra for forming fair finished drain or channel inner girth in cement concrete using extra cement including forms, moulds mitred / stopped end, complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces and finish the surface fair and even without using extra cement including two coats of exterior emulsion after preparation of surface complete all as specified

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches, ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-

One light point controlled by one, one way switch 5 Amps complete all as specified.

One fan point / exhaust fan point controlled by one, one way switch 5 Amps and regulator complete all as specified.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified

One bell point controlled by one, bell switch 5 Amps complete all as specified.

All as per item No 121.00 above but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified.

S & F modular Bell push 6 Amps single module complete all as specified and as directed.

Supply and fix in replacement Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S & F Modular switch one way 6 Amps, 1 module complete all as specified and as directed.

S & F Modular switch one way 16 Amps, 1 module, with neon indicator complete all as specified and as directed.

S & F celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified and as directed.

S & F for modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed.

S & F for Modular socket, 6 Amps, 2/3 pin combination 2 module complete all as specified.

S & F for Modular socket, 6/16Amps, 2/3 pin combination 2 module complete all as specified.

S & F for lamp holder, PVC/ Polycarbonate type with base plate suitable for batten/ slanting fittings complete all as specified.

S&F vertical 8 way TPN double door recess mounted/wall mounted MCCB's as incommer is 3 pole V- Tec of 100 amps rating & 16 KA breaking capacity MCCB is pre fitted at factory & including price of MCCB all as directed and spd by engr in charge Cat Part No DBVTH004SD L&T equivalant to Havells/Legrand all as specified and as directed.

S&F MCB DB, SPN, sheet metal enclosure, 8 way with 200 Amps rated bus bar double door, with locking arrangement fixed in wall including cutting & good to disturbed surfaces complete all as specified and directed.

S & F for MCB Single pole and neutral rated capacity 40-63 amps, 240 Volts breaking capacity 10 KA complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 amps, 240 Volts breaking capacity 10 KA complete all as specified and as directed.

S & F for MCB Single pole and neutral rated capacity 40-63 Amps, 240 Volts breaking capacity 10 KA complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6.0 Sqmm nominal area and drawing into PVC non metallic rigid PVC casing caping including one run of PVC insulated 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. (Note :- Three runs of 6.0 sqmm cable, and one run of PVC casing caping will be measured as one unit)

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size concealed in wall etc including one run of PVC insulated 4.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. (Note :- Three runs of 4.0 sqmm cable and one run of PVC conduit will be measured as one unit)

S & F wall mounted LED 20 watts, LED batten for surface and pendant application, Anodized extruded aluminium housing, high transmissitivity diffuser and high lumen output, 230 volts etc complete with all accessories internally pre-wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S & F for LED 10 watts batten aluminium extruded with decorative end caps including removal old unserviceable T8 type light fitting complete all as specified and as directed. (Make - Bajaj Cat Part No BCLSB 10 WH, Wipro Cat Part No LL20-111-XXX-65-NE or its equivalent in Philips, Havells)

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangementsnd provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape and including taking down old unserviceable existing light fitting of any description complete all as directed. (Make :- Bajaj Cat No BCLST 25W LED I, Philips Cat Part No BRP042 or of equivalent model in Wipro)

S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and including provosion of LED bulb 10/11 watts complete all as specified and as directed. (Make - Havells Cat part No - LHGLO6160099 or its equivalent in Wipro, Philips, Bajaj)

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Taking down ceiling fan of any size/sweep after disconnection the wire from existing ceiling rose and refixing the same after cleaning dust, oiling greasing etc including provinding flexible three core wire of size 23/.0076 from ceiling rose to connector of fan all as specified and as directed.

Dismantling and taking down old unserviceable meter box any type any size and making good with disturbed surface filling of bricks works and cement plaster including of two coat of cement base paint and replacement with new electric meter box suitable for three phase electric meter with MCB TPN 40 Amps made out of 2mm thick CRCA MS sheet with transparant door for meter reading all as all as specified and as directed.

S & F for metal body exhaust fan, AC single phase, heavy duty, turbo force 240 V of size 200 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed. (Make - Bajaj Cat Part No -Maxma DX 8" or its equivalent in Crompton/Havells )

M & L for earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3, SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection and 20 mm dia medium grade GI pipe for watering purpose inlcuding funnel, wire mesh, RCC pit with cover complete and connected to earthing test point all as specified or indicated including testing on completion all as specified and as directed. (Note : GI earthwire and GI protection pipe upto 7.5 mtr length shall be included in this item.)

M & L for cutting and making a hole into or through cement concrete or stone masonary wall of thickness upto 45 Cm and in grith not exc. 45 cm for fixing exhaust fan of size 300 mm sweep and providing fastners grouted in wall four nos inide for fixing of Exhaust fan and four nos outside for louvers and redressing the surface and making good with cement plaster 1:4 to match with existing surface including lime white wash alll as specified.

S&F industrial metal clad socket 2P+1N complete with metal clad 3 pin top and MCB SP 32A in sheet metal enclosure all as specified and directed.

M & L for wiring in PVC casing capping complete with 1.5sqmm single core FRLS grade PVC insulated unsheathed, 1100V grade copper multistranded existing PVC insulated FRLS grade copper earth continuity conductor cable 1.5sqmm connected to common earth dolly including steel terminal boxes made out of 1.2 mm thick MS sheet concealed in walls for housing the switches ,socket outlets, fan regulators One light/one fan point controlled by one switch.

all as per Sr. item No. 150.00 above but for One 5A 3 pin switch socket outlet on same board complete all as specified and as directed.

All as per item No. 150.00 above but for One 5A 3 pin switch socket outlet mutipurpose on independent board complete all as specified and as directed.

Supply and fix switch piano flush button type 5 Amps SP one way complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 Pin 5 Amp flush type 240 volts complete all as specified and as directed.

S&F exhaust fan 225mm sweep with double ball bearing, metallic body suitable for oil and dust free application with louver shutter conforming to Cat Part No. Bahar of Bajaj or of equivalent model in Crompton, Usha complete all as specified and as directed.

M&L for cutting and making hole into or through cement concrete / stone masonry wall for fixing exhaust fan of size 300mm sweep and providing fastener grouted in wall inside and outside of the wall and making good of disturbed surface with cement plaster in CM 1:4 to match existing surface complete all as specified and as directed

M & L for Point wiring any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade, (FR) ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes with earth dolly duly concealed in wall, painted with two coats of anti corrosive paint over a coat of red oxide primer, internally, covered with plastic laminated sheet suitable for switches, including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly, for one light / fan / point controlled by one switch complete all as specified and as directed.

M/s Omkar Associates

SARATH ENTERPRISES

Gauri Associates

M/S Sandeep Enterprises

Parhar Enterprise

R k construction

M/s.BAJRANG CONSTRUCTION