Education Fund 2025-26 Repair and Renovation work of Sattayampudhur and Sengodampalayam Municipal Middle School Ward no.17 and 2 in Tiruchengode Municipality.

Dismantling, clearing away and carefully stacking materials useful for reuse for any thickness of walls Brick Work etc complete.,

Chipping of concrete and roughening the surface from roof/Beam/Column etc complete as per standard specification.

Dismantling, clearing away and carefully stacking materials useful for reuse for any thickness of walls Pressed tiles & weathering course etc complete.,

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification . CIVIL DATA -2021-22

Towards the charges for removal of Old Paver Block and Relayed of Paver block removed area etc complete.,

Towards the charges for Welding of damaged MS Door,frame, hinges with good conditions etc complete.,

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Towards the Charges for cleaning of corrossion ,paint and and apply enamel paint over the Flag pole through height including all labour charges etc., complete.

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Supply and fixing of Condensor to damaged fan point etc complete.,

Supply and fixing of PLUG AND SOCKETS IN SHEET STEEL ENCLOSURE WITHOUT MCBs 20A SINGLE Pole etc complete.,

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Supply delivery and fixing of AC Exhaust Fan 375 mm (15”) sweep (Light duty) etc complete.,

Providing and Applying high perfomance solar reflective & Acrylate silicon based Waterproofing coating which is single component, cold applied, water based acrylic and UV resistant water proofing treatment to the Existing Roof screed surface applied @ 1.5 l/m2 in 3 coats to achieve 1mm DFT, having tensile strength 2N/ mm2 confirming to ASTM D 412; Elongation at break ≥ 200%, Abrasion resistance 21mg confirming to ASTM D 4060 and Crack bridging ability up to 2 mm, including surface preparation, priming the surface with 1 coat diluted with water in the ratio 2:1 spreading @ 0.125 L/m2 as self-priming coat in the SSD condition and spreading 45 gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwiched between the first and second coat completely as per specification. The finished cost to include surface preparation, making coving at Junction, treatment of cracks completely as per specification

add GST 18%