Installation of 16 Mtr. Pole with High Mast/ Focus Light in PURMANDAL, SAMBA

Amount

Supply , Installation of Hot Dip Galvanised 16m High Mast for LED flood lights with motorised carriage of aproved makes with its accessories. Mast shall be intwo sections hot dip galvanised and suitable for wind velocity as per IS:875.( i.e 55 m/sec) with min overlap of 300m or 1.5 times dia at penetration with min 460mm Botton and 150mm Top Dia.and thickness of 4mm and 3 mm respectively . It should also include acessories of the high mast including head frame, steel wire rope 6mm (Dia 7/19 construction),Trailing cable, double drum winch,galvanised luminaire Carriage suitable for required luminaries symmetrically or asymetrically as shown in the lighting design and its control gear boxes, lighting final. The mast shall have integral power tool installed in the base compartment for its operation including one Set ( 8 No ) of foundation bolts of min T.S of 650N/sq.mm manufactured from special steel along with nuts , washers, anchor plates and templates. Make: SYSKA/ Bajaj/Surya/Cromptom/utkarsh

Providing reinforced cement conrete foundation of size and design as per Mast Manufacturer.

Supply, Installation , Testing and commissioning of 200W LED Secure NEO LED flood light made up of pressure die cast aluminium housing with toughened glass and high power LED's and secendary lenses with IP 66 protection system efficacy of < 110 LPW . Make : Cromptom /Philips/Bajaj/Syska/surya/jaquar

Supply, Installation, Testing and Commissioning in replacement of factory made LT feeder pillar box Outdoor type ,floor mounted, double door, cubicalcmpartmentalized type suitable for 415 volt 3 phase, 4 wire, chamber with insulated aluminium busbar 250 Amp rating(100% neutral) insalled on porcelain insulators. The panel shall be dust and vermin proof fabricated out of 1.2/1.5 mm Stainless steel foamed in PU gasket ,finish, panel mounted on frame having 4 nos lags 45cm long, 15 cm grouted in PCC of ratio 1:3:6. Front & back opening type with aprons for cable entry with locking arrangement including internal wiring with PVC insulated multistranded copper conductor cables of suitable size,thimbling and cable entry boxes with cable glands. The panel should be IS/IEC 61439-I- TTA. The panel builder should submit test certificte along with GA drawing before executing the job.Digital Volt & Amp Indicator R,Y,B. The scope of work also includes supply and fixing the following :- Make : Electricfield, Powercontrol system.

Incomer

63A 4 Pole microprocesser baced 25 KA MCCB -1 No. for protection against Earth, short circuit and over current Fault.

GPS timer switch equivalent to 1 Channel Alpharex D22 Astro -1No.Make : L& T , Legrand, Siemens

Outcomer

Bushar shall be Aluminium TPN 250A duly supported on DMC insulators and covered with heat shrinkable color coded PVC sleeves.

5-10 Amps single pole MCB - 6 No.

32 A 4 POLE MCB 10 KA - 2 No

Make of MCCB/Contactor/TimeSwitch/SPD: Schneider (Acti-9), Legrand (DPX3), Siemens (Betagard)/L&T

One No industrial socket of min 20 A cap .

Supply and laying of 3 core 2.5 sqmm cable form panel to LED lights including connection at both ends.

Maintenance Free Chemical Gel Earthing of Dual Pipe Technology (GI) - Supply, installation & testing of advance maintenance free G.I. Pipe 3 metre long , 50 mm dia duly galvanised outer pipe 100 micron & inner pipe 300 micron as per Indian Standard- IS 3043 – 1987 with the permanent sealings at both the ends with lead terminal of 32 x 10mm at the top with 50 Kgs of mixture of Resistance Lowering Grounding Minerals. The chemical compound should be tested and certified by any International accredited and BIS (Bureau of Indian Standards) accredited laboratory. The earth rod shall be duly tested & certified by CPRI (Central Power Research Institute), Govt. of India for a minimum short circuit current of 25 KA rms. The chemical earth electrode manufacturer shall be an ISO 9001: 2008 & ISO 14001: 2004 certified organization. The Earth pit should be covered with heavy duty polyplastic weather proof chamber with tested load of upto min 4.5 tons as per NBC 2016. (Make: TERCEL/ Furse/JMV)

Supply, Testing , Fixing and Commissioning of 35 x 4 core Outdoor type termination kit Make 3M, Raychem, Yamuna Densons

Supply, laying, testing and commissioning of PVC/XLPE insulated PVC sheathed (heavy duty) Aluminium armoured cable with working voltage of 1100 voltage conforming to relevant IS. The cable is to be laid in the trench 35 mm sq. 4 core in DWC PIPE 50mm in ground including excavation, sand cushioning, protective covering & refilling the trench etc. cable Make : Polycab, Gloster, KEI

A G ELECTRICALS

Sumit Anand

M/S Om Prakash Sharma & Sons

RAVISUN ELECTRICALS

Manohar Kumar

AJAY CONSTRUCTION

Grun Umwelt Energy Pvt