Optical Components

Optical Components

Fixed optical attenuator 20dB Specification: Fiber Type: 9/125 SMF Operating Wavelength: 1550 nm Attenuation: 20 dB Connector Type: SA

Fixed optical attenuator 10dB Specification: Fiber Type: 9/125 SMF Operating Wavelength: 1550 nm Attenuation: 10 dB Connector Type: SA

Fixed optical attenuator 5dB Specification: Fiber Type: 9/125 SMF Operating Wavelength: 1550 nm Attenuation: 5 dB Connector Type: SA

Optical coupler 90:10 Specification: Operating Wavelength: 1550 nm Coupling Ratio: 90/10 Operating bandwidth: ±20 nm Excess Loss: ≤0.15 dB Typical Insertion Loss: ≤3.6 dB Configuration: 1x2 Connector Type: SA Fiber Pigtail Type: 0.9mm loose tube pigtail

Optical coupler 50:50 Specification: Operating Wavelength: 1550 nm Coupling Ratio: 50/50 Operating bandwidth: ±20 nm Excess Loss: ≤0.15 dB Typical Insertion Loss: ≤3.6 dB Configuration: 2x2 Connector Type: SA Fiber Pigtail Type: 0.9mm loose tube pigtail

Optical circulator 1310nm Specification: Center Wavelength: 1310 nm Quality Grade: Standard grade Pigtail type: 900-micron loose tube pigtail Connector type: SA Power: 300 mW

Optical switch Specification: Wavelength Range: 1260nm-1620nm Testing Wavelength: 1550nm Insertion Loss: Typ:0.5, Max: 0.8 TYPE- Latching Type: SA connector SMF fiber with 0.9mm loose tube pigtail

Optical circulator 1550nm Specification: Center Wavelength: 1550 nm Quality Grade: Standard grade Pigtail type: 900-micron loose tube pigtail Connector type: SA Power: 300 mW

ADM Specification: "Channel wavelength: C band: 1529.55nm to 1560.61 nm Centre wavelength: Channel 31 Minimum Channel Spacing: 100GHz Isolation > 28 dB Insertion loss <1.5 dB Connector- SA"

VoA Specification: Operating band: C band Connector type: SA Insertion loss: 0.5 dB Attenuation range: > 30 dB Pigtail type: 900-micron loose tube pigtail Type of the attenuation: Bright type Electrical pin option: 2 pins Connector type: SA

Polarization beam splitter Specification: Center Wavelength: 1550nm Grade P Insertion loss: 0.40 dB Fiber Pigtail Type: 0.9mm losse tube pigtail Connector Type: SA Power Handling: Standard 300 mW Type: PM Beam Splitter Pigtail Type: All PM fiber

SFP 1350nm Specification: >=1 Gbps SFP+ Transceivers, 160 km range, 1350nm, dual port, and Hot pluggable

SFP 1370nm Specification: >=1 Gbps SFP+ Transceivers, 160 km range, 1370nm, dual port, and Hot pluggable

SFP 1310nm Specification: >=1 Gbps SFP+ Transceivers, 160 km range, 1310nm, dual port, and Hot pluggable

SFP 1550nm Specification: >=2.5 Gbps SFP+ Transceivers, >100 km range, 1550nm, dual port, Hot pluggable, Ch31 (1552.52 nm)

Photodiode Specification: 800 - 1700 nm, INGaAs photodetector FC/PC or FC/APC or SC/PC or SC/APC Fiber Input Connector SMA Output Connector

Fiber adapter SC-SC Specification: optical adapter- SC to SC, single mode

Fiber adapter SC-FC Specification: optical adapter- SC to SC, single mode

Fiber adapter SC-SC Specification: optical adapter- SC to SC, single mode

Fiber adapter FC-FC Specification: optical adapter- FC to FC, single mode

Patch cords SC/APC- FC/APC Specification: Single Mode Patch Cable, 980 - 1650 nm / C-band , Ø900 um Jacket, ideal length= 30 cm (max. allowed: 1 m length)

Patch cords SC/APC- SC/APC Specification: Single Mode Patch Cable, 980 - 1650 nm / C-band , Ø900 um Jacket, ideal length= 30 cm (max. allowed: 1 m length)

Patch cords FC/APC-FC/APC Specification: Single Mode Patch Cable, 980 - 1650 nm / C-band , Ø900 um Jacket, ideal length= 30 cm (max. allowed: 1 m length)

Patch cords SC- LC Specification: Single Mode Patch Cable, 980 - 1650 nm / C-band , Ø900 um Jacket, ideal length= 30 cm (max. allowed: 1 m length)

Patch cords FC/APC - FC/APC Specification: Single Mode Patch Cable, 980 - 1650 nm / C-band , Ø900 um Jacket, ideal length= 30 cm (max. allowed: 1 m length)

Patch cords SC/PC- SC/APC Specification: Single Mode Patch Cable, 980 - 1650 nm / C-band , Ø3 mm Jacket, ideal length= 30 cm (max. allowed: 1 m length)

Fiber adapter SC panel Specification: 12cm x 3 cm, min 5 nos of SC-SC connector ports (double row)

FSR reels Specification: Organize fiber cables on the optical table or breadboard, hold fiber optic cables with 900 µm or 3 mm Jackets up to 5 m in Length; 1/4" (M6) counterbore for mounting or stacking on a 1/4"-20 (M6) breadboard

Fiber trays Specification: Passive Component Fiber Tray to securely hold Fiber components with cylindrical housing diameter from 0.118" to 0.236" (3.0 mm to 6.0 mm); holds fiber optic cables with a 900 µm jacket; slots for 1/4"-20 (M6) screws for mounting to optical tables or breadboards; slots for 4-40 (M3) screws for OEM integration or mounting to mini-series breadboards

12 cores Fiber Optic Splice Tray

chassis mountable Spring loaded LC-LC adapter Specification: LC-LC type female adapter

LC to SC patch cords Specification: Single Mode Patch Cable, 980 - 1650 nm / C-band , Ø3 mm Jacket, ideal length= 30 cm (max. allowed: 1 m length)

LC to LC patch cords Specification: Single Mode Patch Cable, 980 - 1650 nm / C-band , Ø3 mm Jacket, ideal length= 30 cm (max. allowed: 1 m length)

Please Enable Macros to View BoQ information