Construction of Solar Energy based Water Supply Scheme with Galvanized Tubular Steel Structure T/W Solar Panel Mounted on ESR

Providing all installation of Solar Powered Submersible auto run & stop DC Pump Moter (900 WP) of stainless steel suitable for minimum 125 x 115 mm bore well aperation head 60 metre. Discharge rate minimum 2000 LPH with lowering up to 60 mtrs, 32 mm dai UPVC schedule 80 column pipe & 2.5 sq mm x 3 core flat Submersible cable of IS694 : 1190including mono / poly crystalling PV array tank withstand the wing pressure upto 200 kmph & making suitable arrangement to operate Hand Pump manually in the same bore when there is no solar power including. 05 years warranty against defects in meterial and workmanship with locking arrangement of switch board the system should be eco - friendly.

Providing panel board of 3.00 HP Solar Submersible Pump

Carrying out recuparation Yeild test for ascertaining the discharge of constructed well excavetad profile as directed by the ELC. The test carried out by the drawing down water from the well profile below normal subsuil water level upto full depth rise is recorded the normal water level sub soil water level in the well profile as well as strainer level at pump as per design of W.S. scheme shall be recorded prior to the test including cost of all meterials, over load, labours etc complete as directed.

Supplying all labours, tools and equipments for dismnatling of head and water tank asseby and taking out 32 mm dia old G.L. Pipe, connectiong Road, clylinder assembly the dismnatled components sfter necessary changing for making the T/W in good condition with all transportation including unused taken out materials back in atore all compkete job per direction of E/I.

Supplying ISI Marked special water tank Assembly Mark- II (G.I.) conforming to IS 15500/2004 with latest revision suitable for dual water supply arrangement.

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50M including all lifts with leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I. Extra for earth work in hard soil as per specification and direction of E/I. (vide classification of soil item B)

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royaly and taxes all complete as per building specification and direction of E/l. (Mode of measurement compacted volume)

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Providing TMT steel reinforcement 10mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. 8mm dia

Providing TMT steel reinforcement 10mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. 10mm dia

Providing structural steel galvanised tubular hollow section work in trusses, other similar trussed and members with all bracing, gusset plates etc as per detailed design and drawing or as directed by Engineer-in-charge, including cutting fabricatting, hoisting, erecting and sixing in position, making riveted /bolted /welded connections and one coat of anticorrosive paint and over it teo coat of all oil painting & for structure(PLUS) providing and applying transportation for galvanizing minimum thickness 80microns (Net Wt. of components to be Galv) preferably TATA structural section etc complete.

Providing structural steel work in trusses other similar trusses purlins and members with bracing gusset plates etc as per detailed design and drawing or as directed bt Engineer-in-charge including cutting fabricating hoisting erecting and fixing in position making reveted bolted welded connection one coat of anticorrosive paint and over it two coats of oil painting etc complete (MJP DSR-2018-2019)

Materials and labour for vinyl painting of matter given by department in different color (As per Market Rate)

Cost of 2000 Liters Capacity Water Storage Tank (M-079 : DW & S)

Transportation Charge

Lifting of 2000 Litrs Caoacity Tank up to 4.00m height with lifting tools with rope and labour

Making hole in Tank

Making long screw in G.I. Pipe including supplying and fitting jam nuts and extra socket etc.

Providiag designation 75A brick work in Cement Mortar (1:6) in foudation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l. (BCD-SOR-5.2.3)

Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l. (BCD-SOR-5.7.3)

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I. (BCD-SOR-5.6.1)

Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. (BCD-SOR-5.7.6)

Providing fitting and fixing HCI or MS grating weight not less than 1.25 kg at the inlet of the soak pit

Providing brick bats including cost of the bats, labours tools, royalty etc all complete as per specification and direction of E/I.

Supplying materials and construction of brick masonary drain 150mm width and 150mm depth with 250mm apron on both sides over 50mm thick P.C.C. (1:3:6) over a brick flat soling, apron laying, brcik work in C.M. (1:6), 12mm cement plaster (1:3) with punning on exposed surface all (JDWSD-2018 3.1.23)

Providiag designation 75A brick work in Cement Mortar (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l.

Providiag designation 75A brick work in Cement Mortar (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

Providing 12 mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l.

Providing 1.5 mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.

Supplying, fitting and fixing following pipes, fitting, bib cocks confirming relevant IS specification including cost of all meterials, labours etc all complete as per specification and direcition of E/l. (i) 15mm dia G.I pipe ( Medium) ( Wall)

(ii) 15mm dia G.I elbow

(iii) 15mm dia G.I nipple

(iv) 15mm dia G.I socket

(v) 15mm dia G.I Tee

(vi) 15mm dia brass cock (weight not less than 400gms)

Supplying tools and making connection of new G.I distribution branch 15mm to 50mm dia with existing G.I main by providing and fixing G.I Tee including cutting of pipe at two places, threading their ends, providing long screw and a G.I nipple all complete as per specification and direction of E/I. (a) 15mm dia branch line for stand post from 32mm dia existing distribution line

Cost of drilling 115mm/125mm deep bore well in all kinds of soil and rock in rural area for installation of pump set with D.T.H. rig all complete! including supplying all materials, labours, tools, drilling rig, air compressor and equipment as well as fuel, lubricants for making boring and cost of transporting/charges of rig machine & other vehicles up to site of the work as per specification and direction of E/l. (a) Up to 50 mtr Below G.L.

(b) Beyond 50 mtr. up to 125 mtr. Below G.L.

Supplying all tools tackles & lowering of 200mm dia MS ERW Casing pipe of 6mm wall thickness including welding charges, cost of pipe etc. all complete job.

Supplying all materials, labours, tools & equipments for fitting & fixing 200mm dia MS Cap over Casing pipe complete job.

Supplying all tools, equiprnents and labour and doing washing, flushing and developing of drilled tube welt to give clean and clear water all complete as per direction of E/l.

Supplying, Lowering of uPVC pipe of 50 mm dia heavy duty including of required fittings,solvent etc.all complete job as per direction of E/I.

labour cess

photography and sign board