PERIODICAL SERVICES IN MD AND OTM ACCN IN ZONE-I, II AND III UNDER AGE B/R-II OF GE (NORTH) MEERUT CANTT

Amount

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

All as described in ser item No. 2 above but except brick ( sub class 'B' bricks or fly ash bricks which is retrieved from demolition ) complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete as directed and specified. Note : The rate quoted by contractor is deemed to be included necessary steel/wooden scafolding and from work as required exceeding 3.5m but n.exc 7m height building.

M&L for applying 15mm thick in CM 1:4 rendering using ready mix plaster bags on brick/concrete sufaces of extenal walls finished even and fair . Note : 1. The rate quoted by contractor is deemed to be included necessary steel/wooden scafolding and from work as required exceeding 3.5m but n.exc 7m height building. 2. Rendering will be done in two layer. 1st layer will be 10-12 mm thick and 2ndlayer will be 5-3 mm thick.

M&L for plastering 5mm thick in cement mortar (1:3) finished even and smooth as on ceiling complete all as specified and directed. Note : 1. The rate quoted by contractor is deemed to be included necessary steel/wooden scafolding and from work as required exceeding 3.5m but n.exc 7m height building.

M&L for prepration of new surfaces including cornices, pilasters etc (Plastered or unplasterd surfaces) and applying three coats of white (Lime) wash on ceiling complete all as specified.

M&L for complete removal of existing treatment of wall by mechanical means all as specified and directed. Note : Work will be strictly executed by mechanical means/tools as required for smart periodical services).

M&L for applying 2mm thick exterior grade wall care putty making smooth surface complete all as specified and directed.

SMART PERIODICAL (INTERNAL)

M&L for applying two coat of oil bound distemper including over a coat of 2mm thick wall putty using roller for painting complete all as specified and directed.

SMART PERIODICAL (EXTERNAL)

M & L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over Old/decorated surfaces complete all as specified and directed.

M&L for preparation of old plastered/unplastered surfaces of walls and applying one coat of exterior acrylic emulsion paint over a paint of primer and putty in repair of pathches complete all as specified and directed.

M&L for prepration of old decorated surfaces of walls incl scraping down smoke soot, moulds, moss & efflorescent salts & trading oil and greesing spots etc & applying two coats of exterior emultion paint (in Camouflage pattern) complete including removal of existing treatment complete all as per manufacurers instructions.

M&L for preparing plastered or unplastered old surfaces of walls and applying two coat of cement base paint, complete all as specified and directed.

M&L for preparation of old surfaces and applying two coat of fire retardant paint based on special resins and chemicals having good resistance against fire and protection to base substrate upto smooth mat finish on walls by using roller and spray complete all as specified and directed. Note :- Site for fire retardant paint located at restricted area.

M&L for preparation of old surfaces and applying one coat of fire retardant paint based on special resins and chemicals having good resistance against fire and protection to base substrate upto smooth mat finish on walls by using roller and spray complete all as specified and directed. Note :- Site for fire retardant paint located at restricted area.

M&L for preparing plastered or unplastered old surfaces of walls and applying one coat of cement base paint, complete all as specified and directed.

M&L for preparing plastered or unplastered old surfaces of ceiling and applying two coats of white wash on ceiling complete all as specified and directed.

M&L for preparing plastered or unplastered old surfaces of walls and applying two coat of white wash, complete all as specified and directed.

M&L for preparation of old surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil bound distemper using roller for painting over & including over a coat of 2mm thick cement based wall care putty wherever required complete all as specified and as directed.

M&L for preparation of Old/decorated surfaces of walls and applying two coat of oil bound distemper using roller complete all as speicified and directed.

M&L for applying washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified including forming/rpovinding groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster in each Sqm area as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed.

M&L for cleaning the surface using wire brush, remove existing paint wall putty and remove the entire loose particles from the dampness surfaces of walls and apply Dampguard solution mixed with wall care putty and apply two coats of mixed solution as per manufacturer instruction or as directed Note : (i) Work will be strictly executed as per manufacturer instruction or as per direction of Engr-in-Charge.

M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified.

M&L for prepration of old steel or iron surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified. Note : (a.) The work pertaining to periodical services shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Cement base paint, Putty etc. to be used by the contractor and approved by Garrison Engineer. (b.) The contractor shall upload along with the documents under cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. (c) Work will be strictly executed by mechnised means/tools as required for smart periodical services i.e. vacuum based sanding machine,mechanical mixer,grinder, roller etc)

Taking out old unserviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size; hacking out old putty or removing beads etc, including making good breakages in taking out and handling removing to store or stacking for reuse as specified and directed by Engineer-in-Charge.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F in repair Galvanised MS wire cloth, 0.56 mm nominal dia. of wire and avg width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples where required, removing the clamping of steel windows with welding machine and fixing in the same with welding after fixing of wire mesh complete all as specified and directed.

S&F in repair Aluminium mortise lock vertical type size 100 mm 04 levers complete all as specified and directed by Engineer-In-Charge.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) area of each n exc 1.5 sq.m, including necessary builders hardwares complete all as specified and directed by Engineer-in-Charge.

S&F Powder coated anodised aluminium frame for door, windows, ventilators & sliding shutter with triple track (02 Nos Glazed shtter and 01 Gauzed shutter) with one or more rebates including necessary aluminium mongareies such as locking arrengement,rubber gasket, joining cleat for fixing etc. complete all as specified and directed

S&F 4mm thick sheet glass, ordinary quality and glazing with beading in square exc 0.5 sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M & L for Cleaning of water tanks of capacity exceeding 500 ltr and not exceeding 1000 ltr by removing all scale and dirt, etc from tanks and from mouth of circulating pipes etc complete all as specified and directed.

S&F in reapirs 20 mm bore Ball PTMT valve high pressure with plythene float and fly nut screwed for iron pipe or brass ferrule complete all as specified and directed

S&F in repairs 15 mm bore Ball PTMT valve high pressure with plythene float and fly nut screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs CP bib tap 15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repairs 15mm dia Angle valves,cast copper alloy, fency type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repairs 15mm dia stop valves,cast copper alloy, fency type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repair 15mm bore Brass CP mixer for mixing hot & cold water with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, (Suitable for MAP Qtr or as per sample kept in AGE B/R-II Office) screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore Brass CP Swan neck Pillar tap for WHB with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (Suitable for MAP Qtr or as per sample kept in AGE B/R-II Office) complete all as specified and directed.

S&F in repair 15mm bore Brass CP Swan neck Sink cock fixed with wall end with flange screwed for iron pipe and fixed (Suitable for MAP Qtr or as per sample kept in AGE B/R-II Office) complete all as specified and directed.

S&F in repair Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 500 ltrs, including 20 mm bore Ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and dismantling of old water tank complete all as specified and directed.

S&F in repair Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 300 ltrs, including 15 mm bore Ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and dismantling of old water tank complete all as specified and directed.

S&F in repair looking miroor with PVC frame of size 600mm x 600mm with rawl plugs and screws complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded or pointed in any mortor complete all as specified and directed by Engineer-In-Charge.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing type over and including 15mm thick screed bed or beding of cement mortar 1:4 complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S&F in repairs glass shelf 500 x 125 mm complete with CP brass bracings and brackets and screws etc complete all as specified and directed.

S&F in repairs 15mm dia 25 mm long CP brass extension nipple complete all as specifeid and directed.

S&F in repairs 15mm dia 40 mm long CP brass extension nipple complete all as specifeid and directed.

S&F in repairs 15mm dia 50 mm long CP brass extension nipple complete all as specifeid and directed.

M&L for cutting and removing of bushes, small trees, vegetation (Peepal, bad small plants etc) of any ida and girth from roof projection, chajjas, wall junction, parapet etc at any height by necessary demolition of brick work, cment plaster, digging out roots from concrete or brick wall filling holes on building wall/roof/chhajja/water tank staging area etc and making good with cement mortar 1:4 complete all as specified and directed.

MEEFIN ELECTRONICS

M/S KAPIL ENTERPRISES

M/S AVADH ENTERPRISES