TCMC - Construction of Panchayat Union and Primary School Building at Ward No.1 in Tambaram Municipal Corporation

Amount

Earth work excavation in all classes of soil except sand and rock such as hard stiff clay black cotton shales murrums hard red earth gravelly soil etc with initial lead and lift and Footing

Grade Beam

Supply and filling of crusher stone dust including cost and conveyance of all materials and including all labour charges etc complete

Refilling the excavated excess earth including all labour charges for filling and consolidation etc complete

Plain cement concrete 1:4:8 mix using 40 mm HBG ISS metal including cost and conveyance of all materials and including all labour charges etc complete

Plain cement concrete 1:1.5:3 mix using 20 mm HBG ISS metal including cost and conveyance of all materials and including all labour charges etc completeBasement up to 1.50 M below GL

Super structure Ground floor

Super Structure

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, Columns

Plinth Beam

Plain Surface

Brick work in CM 1:5 mix using second class ground moulded chamber burnt bricks including cost and conveyance of all materials and including all labour charges etc completeBasement

Ground Floor

First Floor

Brick Partition Walls using II class ground moulded chamber bricks of size 9"X43/8"X 23/4" in C.M 1:3 (One part of Cement and Three part of Crushed Stone Sand (M- Sand)) using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm

Special ceiling Plastering in CM 1:3-10mm thick including cost and conveyance of all materials and including all labour Charges etc complete

Plastering in Cm 1;5-12mm thick including cost and conveyance of all materials and including all labour charges etc complete

Painting two coats using cement paint including cost and conveyance of all materials and including all labour charges etc complete

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supply and fixing of MS Fabricated steel windows Including cost and conveyance of all materials and including fabrication charges conveyance charges and fixing in position Window 1.20x1.5M size

Painting Two coats using ready mix enamel paint for new wood workincluding cost and conveyance of all materials and including all labour charges etc complete

Manufacturing, supplying and fixing of Steel doors with following specification.MS angle of size 40x40x6mm at 3.5 kg/m used for outer frame and MS Angle of size 35x35x5mm at 2.6 Kg/m for the shutter frame. Stiffeners with 32x6mm at 1.5 Kg/m MS Flat is provided as the lock rail of the door and welded intact on both ends to the shutter frame.18 G CR Sheets of best quality is laid as panel in the shutter frames. 18x5mm at 0.70 kg/m MS flat is welded over the 32x6mm at 1.50kg/m MS Flat on the rear side of the door, sandwiching the CR Sheet for rigidity. Additional stiffeners with 18x5mm at 0.7 Kg/m MS flats are provided diagonally on the rear side of the shutter. 300mm length of hinges 2Nos, for shutter is provided.6 Nos. of 250mm length hold fasts 200mm length specified at the ends are welded to the outer frame of the door.Tower bolt 2 Nos. at the top provided.

Painting Two coats using ready mix enamel paint for new Iron work including cost and conveyance of all materials and including all labour charges etc complete

Paving the floor with design Rajasthan kotta tiles (colour and shade as directed) of size 610 mm x 610mm x 20mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement etc, complete as per standard specification

Paving the floor with design Rajasthan kotta tiles (colour and shade as directed) of size 610 mm x 610mm x 20mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement etc, complete as per standard specification

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm]

Wiring 2 x 1.50 sqmm (22/0.3) PVC insulated Sc unsheathed Cu.Conductor of 1100 V grade in suitable pvc rigid pipe consealed in wall and ceiling with PVC accessories in flush with wall with 3 mm thick hylumw sheet cover with TW Switch box and 5 A FT switch with coninious earth wire connection for light point and Fan point as per SD 22

Supply and fixing of 5A/15 A3 pin combined flush type wall socket 1ith 5 A flush type switch on suitable TW box SD 133

Supply and fixing of single box type 4 feet 20 W LED Fitting with electronic choke and condensor with TW round blocks on wall or ceiling with fl.tube with PVC unsheathed copper leads etc as per 15B Annexure VII

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour SD 56

Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL Sd 83

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp Sd 110

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board of double door type with metal door with IP43 protection with 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (like standard make) SD 167

Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Damp proof course with Cement Mortar 1:4 (One Cement and Four plastering sand (P - Sand)) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used and finishing, curing etc. complete complying with standard specification.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Add Gst 18%

M.GNANAVEL