PROVISION OF INSTRUCTION SHED FOR GUNNERY TRAINING FOR 13 GUARDS AT MIL STN JALIPA UNDER GE ARMY BARMER

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in any type of soil complete all as specified and directed.

PCC 1:4:8 type D2 by using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and directed.

Pre-cast cement concrete block masonry using PCC, 1:3:6, type C-1 solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6, straight or curved on plan exceeding 6 m mean radius complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed.

Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L 75 mm thick PCC 1:3:6 type C -1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight complete all as specified and as directed.

Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and as directed.

Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in ridge, valley gutters, hip etc., fixed with self tapping screws all as specified and as directed.

Mild steel work as in tubular trusses, rafters, purlins, posts etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS - 1161, Grade YST - 240, medium grade of any dia complete all as specified and as directed.

Mild steel work confirming to Fe - 290, Grade E-165 as in wind ties, clamps, bands, straps or stays, wall ties, hooks etc complete all as specified and as directed.

M & L for two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

Aluminium snap grid frame work of 600 X 600 mm panel size for false ceiling with Aluminium "T" section of size 38 X 25 X 1.50 mm thick for main runners, 25 X 25 X 1.5 mm thick for cross runners and angle of size 25 X 25 X 1.50 mm thick along the walls suspended with and including 4 mm dia, galvanized mild steel wire as in suspenders of ceiling members fixed in proper position, including high pressure steam curved (HPSC) 4mm thick non asbestos cement plain building boards and fixed with screws on snap grid as per manufacturer's specifications and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as required at site complete all as specified and as directed.

Powder coated anodised aluminum sections [Minimum 50 Micron thick] as in doors, windows, ventilators, partitions etc, with one or more rebates including jointing cleat for fixing, glazing clips, rubber beading etc complete all as specified and as directed.

S&F sheet glass 5mm thick , ordinary quality and glazing in squares exceeding 0.5 Sq.m in each pane complete all as specified and as directed.

S & F 25 micron thick sun control film , fixing on glass panel as required complete all as specified and as directed.

Rendering 10mm thick in CM 1:6, on PCC block or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Rendering 10mm thick in cement mortar 1:4 on PCC block or concrete surfaces , finished even and fair using water proofing compound, complete all as specified and directed. NOTE:- water proofing compond shall be measured and paid seperately under respective item of this Schedule.

Supply only water proofing compound

Preparation of newly plasterd surface of walls and applying wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of acrylic distemper complete all as specified and as directed.

Preparation of newly plastered surface of walls and applying two coats of weather proof exterior emulsion paint over one coat of alkali resistant acrylic primer complete all as specified and directed.

RCC 1:1½:3 using 20mm graded aggregate as in slabs supported on walls, beams and colunms in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including rough finished surfaces complete all as specified and directed.

TMT steel bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

TMT steel bars of 5mm to 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

Non skid ceramic coloured tiles of size 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed .

Glazed coloured ceramic tiles of size 450mmx350mmx7mm/ 450mm x 300mm x 7mm thick on vertical surface such as dado/ skirting etc., over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement / coloured cement to match the tiles complete all as specified and as directed.

Rendering 5mm thick in cement mortar 1:3 on concrete ceiling surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

Preparing newly plastered ceiling surfaces and applying three coats of white washing complete all as specified and as directed.

S & F white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests andPVC 'P' or 'S' trap including provision of cement concrete bedding 1:5:10 type E2 connecting to drain pipe and flushing pipe etc., complete all as specified and as directed.

S&F vitreous ware wash down water closet [Pedestal Pattern], white [ETWC] including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap connecting to drain pipe and flushing pipe etc., complete all as specified and as directed.

S&F10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed.

S & F vitreous china ware wash hand basin, white, flat back of size 550 mm X 400 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long including pillar tap, cast copper alloy, chromium plated, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S & F vitreous china urinal, half stall type, flat back, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar [1:2], securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, 32mm bore PVC flexible waste pipe, grating and union for discharge pipe, CP screws etc complete all as specified and as directed.

S & F bib tap, cast copper alloy, 15 mm dia, with crutch or butterfly handle, screwed down for iron pipe etc complete all as specified and as directed.

S&F stop valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed.

S&F GI tubing 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F stop valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 20 mm bore iron pipe or for unions complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed .

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed .

S&F 110 mm bore (SWR) PVC bends with access door any radius complete as specified and as directed .

S&F 75 mm bore (SWR) PVC bends with access door any radius complete as specified and as directed .

S& F110 mm bore PVC [SWR] branch piece, single (single Y) equal or unequal complete all as specified and as directed.

S & F 75mm dia out let, PVC ( SWR) floor trap with grating including jointing to waste pipe with solvent complete all as specified and as directed.

Screed 10 mm thick in CM 1:3 on roof for laying of water proofing treatment using water proofing compound as per manufacturer instructions complete all as specified and directed. NOTE:- WPC shall be measured and paid separately under respective item.

APP based polymeric membrane minimum weighing not less than 3kg / Sqm and minimum 3mm thick reinforced with polyester non woven fabric weight not less than 150 gms / Sqm and on primed surface of one coat of approved bituminous [email protected] Ltr per Sqm by torch application method complete all as specified and as directed .

Rectified edge non skid ceramic coloured tiles of size 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed .

S&F 1000 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 25mm bore pipe weight not less than 455gms complete all as specified and as directed.

M & L for 75 mm thick, PCC 1:4:8, type D-2, using 40mm graded aggregate as in sub base for flooring complete all as specified and as directed.

Chequered cement concrete tiles 20cmx20cmx25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry as in floors/ path etc over and including screed bed or bedding layer of 20mm thick in CM 1:6 complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and as directed.

Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in 20mm dia PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with modular metal flush box of suitable size for mounting of modular switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan/bell point controlled by one, one way switch complete all as specified and directed .

All as per Serial Item No. 55 above but one 3/5 pin socket outlet 5 Amps on independent board complete all as specified and as directed.

All as per Serial Item No.55 above but for one 3/5 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed.

All as per Serial Item No. 55 above but for one light point controlled by two Nos. of, two way switches complete all as specified and as directed.

All as per serial Item No.55 above but for 15 Amps 5/6 pin socket point on independent board with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire complete all as specified and directed .

Ceiling rose, 3 phase / PVC / Polycarbonate, isolated bodycomplete all as specified and as directed.

Modular switch single pole 1way, 6 Amps 1 Module complete all as specified and directed.

Modular switch single pole 1way, 16 Amps 1 Module complete all as specified and directed.

Modular switch single pole 2way, 6 Amps 1 Module complete all as specified and directed.

Modular bell push, flush type, 5 Amps, 230 Volts complete all as specified and as directed.

Modular socket, 6 amps 2/3 pins combined 2 module complete all as specified and directed.

Modular socket, 6/16 amps 2/3 pins combined 2 module complete all as specified and directed.

Modular fan regulator, step type 120 watts, 2 module complete all as specified and directed.

Modular white cover plate with frame suitable for 1 Module complete all as specified and as directed.

Modular white cover plate with frame suitable for 3 Module complete all as specified and as directed.

Modular white cover plate with frame suitable for 4 Module complete all as specified and as directed.

Modular white cover plate with frame suitable for 6 Module complete all as specified and as directed.

Recess mounted 34W LED panel light (2' x 2') cool white , white powder coated CRCA sheet steel housing with high power LED's mounted, seamless front frame with flat white high transmission acrylic cover with all accessories and prewired including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make :- Bajaj model No. BZRSLL GX34W or techno commercially equivalent make in CG / Havells / Philips .

Endura rugby energy saving new generation 10W LED bulk head luminaire with opal diffuser complete with lamp 10W 6000K with all accessories including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make :- Havells Model No. LHEOAOP7UZ6WO1O or techno commercially equivalent make in Bajaj / CG / Philips

Energy efficient, pressure die cast housing with heat resistant toughened glass and individual high power LED's with secondary optics and IP-66 protection street light luminaires 25 W, 5700K, impact resistance of IK 07 fixed on pole including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make :- Havells Model No. LHETAXU7PA6S025 or techno commercially equivalent make in Bajaj / CG / Philips

Street light brackets made out of 40mm dia light grade GI tubing, bent to shape length not less than 1.20 metre fixed with suitable size of clamps, nuts, bolts etc all as required at site, complete all as specified and as directed. Note :- The cost of Clamps, nut bolts etc shall be included in the rate quoted.

Bell, ding dong / multi music type, AC, 230 volts, single pole complete all as specified and as directed.

Submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including 25mm dia PVC rigid conduit with accessories concealed on wall / ceiling with PVC saddles and cadmium plated steel screws and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm and one run of PVC conduit shall be measured as one length for the purpose of measurement.

Single pole and neutral enclosure with two pin earth industrial plug and socket with one MCB SP 20 Amps complete all as specified and as directed.

Factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,TPN 4 way, 415V for fixing MCB's complete all as specified and as directed.

Isolator TPN 4 pole, 63 amps complete all as specified and as directed .

S & F ceiling fan 1200mm sweep suitable for single Phase 230 volts and connected with twin core twisted flexible copper conductor cable from ceiling rose to fitting complete all as specified and as directed.

MCB SP ‘C’ Curve 10KA , 6 to 40 amps 230V complete all as specified and as directed .

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed by Engineer-in-charge. NOTE :(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-( ii) Item includes the cost of GI pipe up to 7.5m for protection of earth wire. Any variation in length beyond 7.50 m shall be measured separately.(iii) Item includes cost of lead wire up to 7.5 m Any variation in length beyond 7.50 m shall be measured separately.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

Supply and spreading clean dry sand ( tibba sand) in trenches for cushioning to PVC cable and punning to provide required cover to UG cable complete all as specified and directed . Note :- Punned thickness shall be measured for the purpose of payment.

Supply & laying 40 to 50mm thick roughly hammer dressed Jodhpur stone patti cable cover 25cm to 30cm wide and not less than 60cm long each laid dry abutting with each other with maximum gap between adjacent slabs n. exc 10mm complete all as specified and as directed.

GI tubing , light grade of 50mm bore with fittings as in road crossings for cable protection complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty XLPE insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi stranded aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 4 core 16 sqmm complete all as specified and directed

Boring / drilling by mechanically / manually under the road in any type of soil with out cutting / disturbing the existing road and inserting GI pipe of any size for drawing the cable complete all as specified and as directed.

Godara Construction and General Suppliers

AMBEY MAA CONSTRUCTION COMPANY

National Rewinding Works

Hariom Construction Company