REPAIR MAINT INCLUDING GEN SERVICING OF STAND BY GEN SETS AT E/M INSTALLATION AT MIL STN FAZILKA.

Amount

Sevicing,repair maintenance including dismantling and opening of unserviceable spare parts of the DG set engine and cleaning, removing deposits and checking of its all parts for serviceability and reassembling all serviceable parts all as original including replacement of defective parts and minor spares required for functioning of DG set 200 KVA Make : Greaves Ltd and re-assembling complete engine testing on load to the entire satisfaction of Engr-in-Charge. Note :- All major defective/unserviceable spare parts/items reqd for replacement shall be measured and paid separetely under appropriate items mentioned ( a to y)

Fuel filter element (primary & secondry)

By pass filter element

Lube oil filter element

Radiator hose pipe set with clamp complete

Water temperature guage

Oil temperature guage

Oil pressure gauge

Fan belt set

Shut down valve

Starting ignition switch

Push Button

Packing Kit

Techometer with cable.

Fuel pipe any type length and specification.

Supply and replacement of Air filter element of existing specificatio.

Battery charging meter 12 VDC.

M & L servicing and cleaning of radiator assy with cleaning solution soldering of puncture tubes to stop leakage including replacement of coolant, testing as required at site.

Servicing calibration and testing of injector assembly incl replacement of barrels plungers cups injector and commissioning the same complete all as spd and directed by Engr-in-Charge.

Strip opening cylinder head for servicing,decarbinising ,refacing and polishing of valve seat complete refixing after satisfactory repairs installing valve and valve guides including replacement of head packing and valves repairing kit e.g. valve seat, valve spring etc. all as directed.

M&L for servicing ,repair and overhauling of self starter 24 V DC complete replacement of worn out fields , armature, solenoid and bendex pinion along with carbon brushes etc complete in all respect all as directed.

M & L maint,servicing, cleaning and calibration of governor assembly complete including spare and repair kit all as specified and directed by Engineer -in-charge.

Supply and replace muffler (exhaust silencer) of existing specification suitable and for 200 KVA D G Set Make: Greaves

Dismantling of alternator parts of DG set 200 KVA 3 phase 4 wire ,AC 415 Volts, such as stator & rotor cores, excitor & field coils rectrifies assy, fan etc.Rewinding of stator field,replacement of exciter assembly and automatic voltage regulator,varnising and damage worn out insulation, cleaning all part by blower, servicing rewiring & varnishing etc. grease of reqd grade to bearing reassembling and testing complete.

Supply and replace water pump assembly of existing specification including replacement of pump pully and bearing.

Sevicing,repair maintenance including dismantling and opening of unserviceable spare parts of the DG set engine and cleaning, removing deposits and preparetion of surface for painting,checking of its all parts for serviceability and reassembling all serviceable parts all as original including replacement of defective parts and minor spares required for functioning of DG set 125 KVA Make : Kirlosker and re-assembling complete engine testing on load to the entire satisfaction of Engr-in-Charge.(Note :- All defective unserviceable spare parts/items reqd for replacement in over hauling shall be measured and paid separetely under appropriate items mentioned in Sch 'A'

Fuel filter primary & secondary

Lube Oil filter element with O Ring

Oil Pressure guauge

Air filter element

Oil Temperature guage

Fan belt set

Starting ignition switch

Battery charging meter 12 VDC.

Water Temp guage with senser

Techometer with cable.

Servicing clabiration and testing of injectors assembling including replacement of worn out parts barrel, plunger commissioning the same completed all as spd and as directed by Engr-in-Charge

Servicing ,repair and testing of self starter 12 volt replacement of defective armature, replacement of bendex pinion, clutch plate, carbon brushes, solenoid , switch etc all as spd and directed by the Engr-in-Charge.

Servicing testing of battery charging alternator 12 volt Dcreplacement the armature, shaft bush, carbon brush, bearing and electronic cut-out , rectifier etc testing all as directed by Engr-in-Charge.

Dismantling of alternator parts of DG set 125 KVA 3 phase 4 wire ,AC 415 Volts, such as stator & rotor cores, excitor & field coils rectrifies assy, fan etc. and cleaning all part by blower, servicing rewiring & varnishing etc. grease of reqd grade to bearing reassembling and testing complete.

Sevicing,repair maintenance including dismantling and opening of unserviceable spare parts of the DG set engine and cleaning, removing deposits and preparetion of surface for painting,checking of its all parts for serviceability and reassembling all serviceable parts all as original including replacement of defective parts and minor spares required for functioning of DG set 75/100 KVA Make : Kirlosker and re-assembling complete engine testing on load to the entire satisfaction of Engr-in-Charge.(Note :- All defective unserviceable spare parts/items reqd for replacement in over hauling shall be measured and paid separetely under appropriate items mentioned in Sch 'A'

Fuel filter primary & secondary

Lube Oil filter element with O Ring

Oil Pressure guauge

Air filter element

Oil Temperature guage

Fan belt set

Starting ignition switch

Battery charging meter 12 VDC.

Water Temp guage with senser

Techometer with cable.

Servicing clabiration and testing of injectors assembling including replacement of worn out parts barrel, plunger commissioning the same completed all as spd and as directed by Engr-in-Charge

Servicing ,repair and testing of self starter 12 volt replacement of defective armature, replacement of bendex pinion, clutch plate, carbon brushes, solenoid , switch etc all as spd and directed by the Engr-in-Charge.

Servicing testing of battery charging alternator 12 volt Dcreplacement the armature, shaft bush, carbon brush, bearing and electronic cut-out , rectifier etc testing all as directed by Engr-in-Charge.

Dismantling of alternator parts of DG set 75/100 KVA 3 phase 4 wire ,AC 415 Volts, such as stator & rotor cores, excitor & field coils rectrifies assy, fan etc. and cleaning all part by blower, servicing rewiring & varnishing etc. grease of reqd grade to bearing reassembling and testing complete.

Sevicing,repair maintenance including dismantling and opening of unserviceable spare parts of the DG set engine and cleaning, removing deposits and preparetion of surface for painting,checking of its all parts for serviceability and reassembling all serviceable parts all as original including replacement of defective parts and minor spares required for functioning of DG set 62.5/63 KVA Make : Kirlosker and re-assembling complete engine testing on load to the entire satisfaction of Engr-in-Charge.(Note :- All defective unserviceable spare parts/items reqd for replacement in over hauling shall be measured and paid separetely under appropriate items mentioned in Sch 'A'

Fuel filter primary & secondary

Lube Oil filter element with O Ring

Oil Pressure guauge

Air filter element

Oil Temperature guage

Fan belt set

Starting ignition switch

Battery charging meter 12 VDC.

Water Temp guage with senser

Water body with mounting

Techometer with cable.

Servicing calibration and testing of injectors assembling including replacement of worn out parts barrel, plunger commissioning the same completed all as spd and as directed by Engr-in-Charge

Servicing testing of self starter 12 volt replacement of defective armature, replacement of bendex pinion, clutch plate, carbon brushes, solenoid , switch etc all as spd and directed by the Engr-in-Charge.

Servicing testing of battery charging alternator 12 volt Dcreplacement the armature, shaft bush, carbon brush, bearing and electronic cut-out , rectifier etc testing all as directed by Engr-in-Charge.

Dismantling of alternator parts of DG set 62.5/63 KVA 3 phase 4 wire ,AC 415 Volts, such as stator & rotor cores, excitor & field coils rectrifies assy, fan etc. and cleaning all part by blower, servicing rewiring & varnishing etc. grease of reqd grade to bearing reassembling and testing complete.

M & L servicing and cleaning of radiator assy of DG set 62/62.5 KVA with cleaning solution soldering of puncture tubes to stop leakage including replacement of coolant, testing as required at site.

Sevicing,repair maintenance including dismantling and opening of unserviceable spare parts of the DG set engine and cleaning, removing deposits and checking of its all parts for serviceability and reassembling all serviceable parts all as original including replacement of defective parts and minor spares required for functioning of DG set 25/30/40 KVA Make : Greaves Ltd and re-assembling complete engine testing on load to the entire satisfaction of Engr-in-Charge. Note :- All major defective/unserviceable spare parts/items reqd for replacement in shall be measured and paid separetely under appropriate items mentioned

Fuel filter element (primary & secondry)

By pass filter element

Lube oil filter element

Radiator hose pipe set with clamp complete

Water temperature guage

Oil temperature guage

Oil pressure gauge

Fan belt set

Shut down valve

Starting ignition switch

Push Button

Packing Kit

Techometer with cable.

Fuel pipe any type length and specification.

Supply and replacement of Air filter element of existing specificatio.

Battery charging meter 12 VDC.

M & L servicing and cleaning of radiator assy with cleaning solution soldering of puncture tubes to stop leakage including replacement of coolant, testing as required at site.

Servicing calibration and testing of injector assembly incl replacement of barrels plungers cups injector and commissioning the same complete all as spd and directed by Engr-in-Charge.

Strip opening cylinder head for servicing,decarbinising ,refacing and polishing of valve seat complete refixing after satisfactory repairs installing valve and valve guides including replacement of head packing and valves repairing kit e.g. valve seat, valve spring etc. all as directed.

M&L for servicing ,repair and overhauling of self starter 24 VDC complete replacement of worn out fields , armature, solenoid and bendex pinion along with carbon brushes etc complete in all respect all as directed.

M & L maint,servicing, cleaning and calibration of governor assembly complete including spare and repair kit all as specified and directed by engineer -in-charge.

Supply and replace muffler (exhaust silencer) of existing specification suitable and for 25/30/40 KVA D G Set Make: Greaves

Dismantling of alternator parts of DG set 25/30/40 KVA 3 phase 4 wire ,AC 415 Volts, such as stator & rotor cores, excitor & field coils rectrifies assy, fan etc.Rewinding of stator field,replacement of exciter assembly and automatic voltage regulator,varnising and damage worn out insulation, cleaning all part by blower, servicing rewiring & varnishing etc. grease of reqd grade to bearing reassembling and testing complete.

Supply and replace water pump assembly of existing specification including replacement of pump pully and bearing.

Sevicing,repair maintenance including dismantling and opening of unserviceable spare parts of the DG set engine and cleaning, removing deposits and checking of its all parts for serviceability and reassembling all serviceable parts all as original including replacement of defective parts and minor spares required for functioning of DG set 15 KVA Make : Greaves Ltd and re-assembling complete engine testing on load to the entire satisfaction of Engr-in-Charge. Note :- All major defective/unserviceable spare parts/items reqd for replacement in shall be measured and paid separetely under appropriate items mentioned

Fuel filter element (primary & secondry)

By pass filter element

Lube oil filter element

Radiator hose pipe set with clamp complete

Water temperature guage

Oil temperature guage

Oil pressure gauge

Fan belt set

Shut down valve

Starting ignition switch

Push Button

Packing Kit

Techometer with cable.

Fuel pipe any type length and specification.

Supply and replacement of Air filter element of existing specificatio.

Battery charging meter 12 VDC.

M & L servicing and cleaning of radiator assy with cleaning solution soldering of puncture tubes to stop leakage including replacement of coolant, testing as required at site.

Servicing calibration and testing of injector assembly incl replacement of barrels plungers cups injector and commissioning the same complete all as spd and directed by Engr-in-Charge.

Strip opening cylinder head for servicing,decarbinising ,refacing and polishing of valve seat complete refixing after satisfactory repairs installing valve and valve guides including replacement of head packing and valves repairing kit e.g. valve seat, valve spring etc. all as directed.

M&L for servicing ,repair and overhauling of self starter 24 VDC complete replacement of worn out fields , armature, solenoid and bendex pinion along with carbon brushes etc complete in all respect all as directed.

M & L maint,servicing, cleaning and calibration of governor assembly complete including spare and repair kit all as specified and directed by engineer -in-charge.

Supply and replace muffler (exhaust silencer) of existing specification suitable and for 15 KVA D G Set Make: Greaves

Dismantling of alternator parts of DG set 15 KVA 3 phase 4 wire ,AC 415 Volts, such as stator & rotor cores, excitor & field coils rectrifies assy, fan etc.Rewinding of stator field,replacement of exciter assembly and automatic voltage regulator,varnising and damage worn out insulation, cleaning all part by blower, servicing rewiring & varnishing etc. grease of reqd grade to bearing reassembling and testing complete.

Supply and replace water pump assembly of existing specification including replacement of pump pully and bearing.

Sevicing,repair maintenance including dismantling and opening of unserviceable spare parts of the DG set engine and cleaning, removing deposits and checking of its all parts for serviceability and reassembling all serviceable parts all as original including replacement of defective parts and minor spares required for functioning of DG set 5 KVA Make : Greaves Ltd and re-assembling complete engine testing on load to the entire satisfaction of Engr-in-Charge. Note :- All major defective/unserviceable spare parts/items reqd for replacement in shall be measured and paid separetely under appropriate items mentioned

Fuel filter element (primary & secondry)

By pass filter element

Lube oil filter element

Radiator hose pipe set with clamp complete

Fan belt set

Packing Kit

Fuel pipe any type length and specification.

Supply and replacement of Air filter element of existing specification.

Supply and replacement lead acid battery 12 Volt 100 AH DC fully charged condition complete all as spd and directed by Engr-in-Charge.MAKE- AMARON( HIWAY Series) Model No NT700E41R.

Supply and replacement lead acid battery 12 Volt 130 AH DC fully charged condition complete all as spd and directed by Engr-in-Charge. .MAKE- AMARON( HIWAY Series) Model No HC800F51R.

Supply and replacement lead acid battery 12 Volt 150 AH DC fully charged condition complete all as spd and directed by Engr-in-Charge.MAKE- AMARON( HIWAY Series) Model No NTX00D04R.

Supply and replacement lead acid battery 12 volt 180 AH DC fully charged condition complete all as spd and directed by Engr-in-Charge.MAKE- AMARON( HIWAY Series) Model No HC180D04R.

Supply and fix in repairs four pole change over switch rating 32 amps,415 volts AC supply, ss enclosure ,installed and fixed on walls, panel all as specified and directed.

Supply and fix in repairs four pole change over switch rating 63 amps,415 volts AC supply, ss enclosure ,installed and fixed on walls, panel all as specified and directed. Make-ABB/C&S

Supply and fix in repairs four pole change over switch rating 100 amps,415 volts AC supply, ss enclosure ,installed and fixed on walls, panel all as specified and directed. Make-ABB/C&S/L&T

Supply and fix in repairs four pole change over switch rating 160 amps,415 volts AC supply, ss enclosure ,installed and fixed on walls, panel all as specified and directed. Make-ABB/C&S/L&T

Supply and fix in repairs four pole change over switch rating 200 amps,415 volts AC supply, ss enclosure ,installed and fixed on walls, panel all as specified and directed.Make - ABB/C&S/L&T

Supply and fix in repairs four pole change over switch rating 400 amps,415 volts AC supply, ss enclosure ,installed and fixed on walls, panel all as specified and directed. ABB/.C&S

Supply & fixing in replacement battery lead , stranded copper conductor PVC insulated 1 mtr long complete with battery terminal and lug.

Supply and replace multigrade lubricating engine oil SAE 20 W 40 after draining out old oil, cleaning of oil chamber with suitable cleaning agent for DG set any capacity, all as specified and directed.

Supply and replace coolant after draining out old oil, cleaning of oil chamber with suitable cleaning agent for DG set any capacity, all as specified and directed.

Dismantling taking down servicing and cleanig of exhaust silencer assy, decrbonising complete of DG Set 75/62.5/100 KVA.

Disconnecting dismantling taking down fuel tank of existing capacity of DG Set 200/125 KVA. Servicing and cleaning with suitable cleaning agent and fixed at original location including marking and replacement of level guage tube complete in all respect all as directed.

Disconnecting dismantling taking down fuel tank of existing capacity of DG Set 75/62.5/100 KVA. Servicing and cleaning with suitable cleaning agent and fixed at original location including marking and replacement of level guage tube complete in all respect all as directed.

M& L for shifting of existing DG from one location to another location by means of hydra and transporting veh of any cap all as specifed and directed

TARA ENTERPRISES (BID ID -3138485)

HARSH CONSTRUCTION CO. (BID ID -3138795)

Singla Electricals (BID ID -3144934)