IMPROVEMENT TO BUILDING NO P 90 AT AF STN MOUNT ABU

Demolition of reinforced cement concrete of any description and in any position complete all as specified

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep for foundation in any type of soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed.

Removing excavated material i.e any type of soil n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M&L for Precast Cement Concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in manhole covers etc. all as specified and directed by Engineer-in-Charge.

M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length bent to shape required incl cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified and as directed.

S & F Rolled sections as in main & cross beams, hip & jack rafters, purlins where connected to common rafters & running rails & guides for sliding doors, fixed with angles cleats or other connecting plates conforming to Fe-410-W (Gde E-250) Quality A complete all as specified and directed.

S&F Pre-Painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, ridges etc fixed with self tapping screws complete all as specified.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius half brick thick wall built in CM (1: 4).

M & L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1 : 6 complete all as specified.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (400X400 square) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450 X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick plaster in cement mortar (1:4) complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar

M & L for Machine cut kota stone slab flooring of size 550x550/ existing size of 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1 : 6 complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20 - 25 mm thick in riser of steps, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 10mm thick rendering to wall in CM 1:3 complete all as specified and directed.

M&L for Mirror polishing on marble/kota stone work where ever required to give gloss finish complete all as specified and directed.

M & L for green Marble work 15 to 18 mm thick (table rubbed and polished) in steps,riser jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding of edges complete all as specified and directed .

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) incl chequered tiling and Paver blocks complete.

M&L for 1st quality non skid coloured ceramic parking tiles/Heavey duty tiles tiles n exc 0.11 Sqm 10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for 75 mm thick cement concrete type-C-2, 1:3:6 using 40mm graded stone aggregate finished cement concrete surface even and smooth without using extra cement in floor complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement. Note-Plinth protection will be laid in outward slope of 1in 12 and in alternative bays/panel. Length of panel shall not exceed 2.5 m and joint between two panel shall be filled with mastic filling ie.,mixture of one part of hot blown bitumen 85/25 penetration and two part of heated sand complete all as specified and as directed by Eng-in-Charge.

Taking down cement plaster on brick or stone walls or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 finished even and fair and mixing with water proofing liquid as per manufacturer's instruction (but excluding the cost of water proofing liquid ) on external surface all as specified

Supply only Liquid water proofing compound of approved make(ISI Marked).

M&L for rendering 10mm thick in CM (1:6) on Brick/ Conc surfaces finished even and fair on internal surfaces of wall complete.

M&L for rendering 5 mm thick in CM 1:3 on concrete surface in ceiling complete.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper on walls over a coat of primer incl 1mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper on walls over a coat of primer and 1 mm thick wall care putty including complete removal of existing treatment complete all as specified and directed.

M & L for preparing of new / old surfaces (preparation by complete removal) of wall, chajja, facia alike (Exterior Waterproof Coating) Providing & apply one coat of Dr. Fixit Raincoat Waterproof Coating / Dr. Fixit Raincoat or equivalent Basecoat as approved by AGE (I) or without any dilution Maintain the spreading rate of 3.70 - 4.20 Sqmt per liter / coat application to achieve about 110-130 microns DFT after raincoat Apply a coat of Dr. Fixit Raincoat Classic Topcoat or equivalent as approved by AGE (I) of desired shade & color with interval of 6- 8 hours without any dilution spreading at rate of 6.0 – 6.40 Sqmt per liter /coat (60 – 65 Sq ft per liter /coat) to achieve DFT of 50 - 60 microns. The material having followed technical properties: Attains hairline crack bridging up to 2 mm, Elongation of >100 % as per ASTMD 412; Tensile strength 2.50 Mpa per ASTM D 412, Complies to anti carbonation test as per EN 1062 part 6 the system life expectancy is 10 years waterproofing & 10 years paint performance by manufacture complete all as specified & directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified.

M&L for preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)

S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete.

S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified.

S&F in repair 110mm PVC (SWR) bends with access door

S&F in repair 110mm PVC (SWR) bends any radius

S&F in repair 75mm PVC (SWR) bends any radius.

S&F in repair 75mm PVC (SWR) bends any radius with access door.

S&F in repair 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door.

S&Fin repair 110mm PVC (SWR) vent cowl.

S&F in repair 75mm PVC floor trap plain with grating including jointing with solvent cement

S&F in repair Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe.

-ditto- all as per item above but 75mm.

M&L for Cutting chases pinning in , making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades, selves lintels etc. and cutting chases for conceled for water tubing or concealed condute wiring etc and making good, cutting n.exc 10cm girth.complete all as specified & as directed

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe.

S&F 16 mm outer diameter CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as specified

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe.

M&L for 20mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

M&L for Refixing old steel tubing 20 mm dia and connections in new or old position (Walls, ceiling, floors, etc.)

S&F in repair 15 mm size bib tap cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete.

S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete.

S & F in repair, vitreous China squatting pan, 'Orissa' pattern, size 630 x 450 mm, white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing complete all as specified and directed.

S & F in repair CI nahani trap dia of outlet 75mm ISI marked having wt not less than 6.5 Kgs including joining to waste pipe fixed in cement concrete (1:2:4) typeB-1 with cement slurry/jute yarn etc complete and testing for water tightness, complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern 10ltrs capacity, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, excluding 32 mm dia. PVC flushing pipe complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps waste chain and plug but including bracket, waste coupling of 32 mm size fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm bore central hole single lever basin mixer with 450mm braided connection pipe (without popup) complete all as specified and directed.

S&F in repair 15 mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125 mm size and fixed complete all as specified and directed

S&F in repair 15 mm bore stop valve fancy type chromium plated with long cup and shank (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed.

Supply & fix PVC connections 15mm size with PTMT nuts of length 600mm.

S&F 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed complete to walls, ceilings or in floors etc.

S&F 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed complete to walls, ceilings or in floors etc.

S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed.

S&F in repair SS soap dish complete all as specified and directed.

Demolition of PCC of any description and in any position not specifically provided for complete all as specified and directed.

M&L for Treatment to sunken floor and sides as mentioned here after:- (Step-I)Cleaning of RCC surface to remove existing treatment to sides and base slab by using sand blasting with compressed air. (Step-II) M&L for application of a coat to sides and base of sunken with glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal -107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika Fab-I and top coat with Sika Seal-107@ 1.50 Kg/Sqm or equivalent of Forsoc or pidilite. (Step-III) M&L for 15 mm thick cement plaster on side and base slab of sunken part in cement mortar 1:3 mixed with appropriate integral water proofing compound with Sika Plastocree plus as specified. (Step-IV) M&L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm on plastered surface of sunken sides & base.Note:All debris obtained from site will be thrown away out side Def Land by contractor at his own expense.

M&L for Cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in sunken part of slab complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone agg) in sub base of flooring etc complete all as specified and directed.

S&F in repair fancy type drapery rod 20 mm dia mild steel, chromium plated with fixing brackets, incl side brackets, finials complete complete all as specified.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each all as specified.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n exc 4.00 Sqm each all as specified.

Taking down shutter of any description exc 1.00 sqm but n exc 2.0 Sqm each, complete all as specified and directed by Engr-in-charge.

S&F factory made single extruded WPC (WOOD POLYMER COMPOSITE) solid door/window/ceosetory window and other frame/chowkhat of size 50x100mm comprising of virgin PVC polymer of K value 58 to 60 (suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specified.

Supply and fixing factory made single extruded WPC wod polymer composite and decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specified.

S&F 35 mm thick flush door shutters factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F for 2nd class hard wood 35mm thick Glazed and skeleton shutters factory made, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete

S&F 150mm Aluminium handles, cast type, anodised complete.

S&F 200mm Aluminium anodised, barrel tower bolts of extruded section complete.

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

S&F 100 mm long butt hinges, medium weight, stainless steel, complete all as specified and directed

Providing and Fixing of Double Rebate windows E2000s Doble rebate made of pre-painted steel (Base steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Handle, stay, 2nos of heavy duty stain less steel pivot hinges and 2 No's of Aluminium Powder Coated Tower Bolt shall be provided per shutter. Including of 4mm thick Plain float glass, SS-304 Grade Wire Mesh, M.S Powder Coated 10mm Square guard bars with 6” (152.4mm) pitch, Installation Charges etc complete all as specified and directed.

Providing and fixing of Three track shutter Sliding Windows(2-glass,1-mesh) Without grill made of Galvanized Steel (Base Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120 GSM), Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer of 0.58 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, Outer Frame for Three Tracks is of 107 mm x 44 mm and the Window Shutter section of 58 mm x 36 mm and the outer Frame with three integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC,handle made of Aluminium 1 No. per each shutter and cut to length miter joined with corner brackets. including of 4mm thick Plain float glass, S.S.304 Grade Wire Mesh, M.S Powder Coated 10mm Square guard bars with 6” (152.4mm) pitch, Installation Charges etc complete all as specified and directed.

Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, Section for louvered ventilators should be of 33 x 56 mm Box section and the sections cut to length mitre joined with corner bracket . Corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete/ masonry wall by means of self expanding screws, 4mm thick Plain float glass, M.S Powder Coated 10mm Square guard bars with 6” (152.4mm) pitch, Installation Charges complete all as specified and directed.

S&F 140mm Floor door stopper of aluminium alloy body and tongue, with hard drawn steel spring.

S&F 300mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete.

M&L for PCC type C-1,1:3:6 (20 mm graded stone agregate ) in surface channels

M&L for PCC type B-0,1:2:4 (12.50 mm graded stone agregate ) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Demolition and breaking up 75/150mm dia in bore drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar in any description complete all as specified and directed

M&L for concrete bed to drain pipes of 100 mm dia including packing under and completely surrounding pipes with concrete after they are laid and tested in cement concrete 1:4:8 type D-2 complete all as apecified and directed

M&L for concrete bed to drain pipes of 150 mm dia including packing under and completely surrounding pipes with concrete after they are laid and tested in cement concrete 1:4:8 type D-2 complete all as apecified and directed

M&L for Reinforced concrete pipes class NP2 of 150 mm dia laid and jointed complete with collars complete all specified and directed

Ditto as above but of 100 mm dia.

M&L for Cutting into existing manholes for removing existing branch drain, making good to pipe and rendering cutting out branch channel, and making good benchings for 150 mm bore pipe complete all as specified and directed.

S&F stainless steel peg set of 6 hooks complete all as specified and directed.

Dismantling mild steel work of any description not otherwise provided for.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for concealed Point wiring including cutting and chasing on wall / roof surface controlled by one switch with 1.50 Sqmm (nominal area) (FRLSH), PVC insulated 1100 volts grade multi stranded copper conductor single core unsheathed cable (FRLSH), ISI marked, PVC insulated 1100 volts grade multi stranded copper conductor single core of size 1.50 Sqmm as earth continuity conductor connected to common earth dolly, not less than 1.50mm thick, drawn through in and including rigid PVC conduit (Medium Grade) of suitable size, with all fittings, ISI marked and accessories, the pipe shall be fixed with clamping and shadle including provision of mild steel terminal boxes/Sunken boxes of suitable size made with 1.60 mm thick mild steel sheet recessed/concealed in wall with a coat of black bituminus paint and providing of modular cover plate , suitable for fixing of modular switches / sockets / regulators etc. fixed in recess/concealed of wall making good to the disturbed surface and matching the existing finish complete all as specified and directed for the following :-

(a) One light point controlled by one way switch 5/6 amps.

(b) One ceiling fan/Exhaust fan point controlled by one way switch 5/6 amps.

(c) One socket out let 5/6 amps point on the independent board

(d) One socket out let 5/6 amps point on the same board

All as per item No 106 above but wiring with 2.5 sq mm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed

S&F Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed.

S&F Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and as directed.

S&F stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans,ISI marked complete all as specified and directed.

S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and directed.

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.

Taking down carefully Ceiling fan/exhaust fan from its original position and refixing / hanging complete all as specified and directed. Note : contractor will take item in sercviceable condition and will refix after the work in serviceable condition

Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 10.0 sq. mm + 1 x 10.0 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring all as specified and as directed. NOTE : Two runs of 10 sqmm conductor for main and one run of 10 sqmm conductor as earth wire with proper colour coding including one run run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

S & F of MCB DB TPN, 415 volts 4 ways , DOUBLE DOOR, IP-43, with MCB Incomer, metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed.

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 16 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and as directed.

S&F MCB, Single pole & neutral, 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unsv one as specified and as directed.

S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unsv one as specified and as directed.

Fixing only old Serviceable LED light of any type.

Supply and fixing of moulded case circuit breaker (MCCB) four pole Adjustable type 415 volt, 50 Cycles, 63 Amps of breaking capacity 16 KA after and including taking down / dismantling of old existing unserviceable one complete all as specified and as directed.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) TPN 63 Amps current carrying capacity in the DB complete with connection testing and commissioning.

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 4 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and as directed.

S&F MCB, Single pole & neutral, 10 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unsv one as specified and as directed.

Please Enable Macros to View BoQ information