Karnataka

To Be Opened

Works

Other Works

Scheme to lift water from Appannappankatte to fill Kudukundi Hosakere and Atthikatte in Arasikere taluk Hassan district.

Cauvery Neeravari Nigam Limited

CNNL No 1 HLBC Div CR Patna | Gorur, Karnataka

Amount: ₹3.8 CrCloses: 29 Aug 2026Closed

Timeline

Published10 Aug 2026
Pre-Bid Meeting14 Aug 2026
Closed29 Aug 2026
Bid Opening31 Aug 2026

Corrigenda

Corrigendum

1 updatesLatest on 18 Aug 2026

Tender Value

₹3.8 Cr

EMD Value

₹5.6 L

Closing Date

29 Aug 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Cauvery Neeravari Nigam Limited

Contact Person

Executive Engineer

Office Number

Work Description

Scheme to lift water from Appannappankatte to fill Kudukundi Hosakere and Atthikatte in Arasikere taluk Hassan district.

Tender Information

Tender ID

CNNL/2026-27/OW/WORK_INDENT5310

Reference Number

CNNL/2026-27/OW/WORK_INDENT5310

Tender Type

Open

Product Category

Other Works

Form of Contract

Two Tender Document System(Two Cover)

Location

CNNL No 1 HLBC Div CR Patna

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredBidder should be registered Civil Contractor of KWD/ KPWD Class I registered contractor

RequiredAudited balance sheets & Turnover certificate for the preceding 5 years 2021-22 to 2025-26

RequiredWork done certificates for similar nature of work

RequiredWork done certificates for critical quantities

RequiredLine of credit in required format

RequiredCertificates to demonstrate owning/hiring equipments

RequiredStaff details

RequiredBid capacity calculation and details of work on hands

RequiredIncome tax returns for the year 2021-22 to 2025-26 and GST Registration certificate

Eligibility Criteria

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The Intending bidder are advised to visit the site of work and also access the tender documents well in advance.

Conditional tenders will not be accepted

Tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The TENDER PROCEESING FEE will not be refunded.

The employer is not responsible for any delay in accessing KPP Portal.

The contractor should be registered in Class-I Category of KPWD

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

As the amount put to tender is exclusive of G.S.T., rates quoted by the contractor should be exclusive of G.S.T,. The contractor is also required to pay quarry Fees, Royalties, Octroi Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor.

Materials like steel, cement etc., required for the work shall be procured by the Contractor themselves and should get the same tested by the quality control authority of CNNL before use in this work

All the formats prescribed in the bid document shall be filled by the bidders in a complete manner. Incomplete formats may constitute sufficient reason at the discretion of CNNL for rejection of the bid.

All scanned documents to be uploaded shall be in original and the Executive Engineer will verify the original documents at any stage before recommending for approval

Further particulars, if any, required by the bidders can be had from the office of the Executive Engineer, No.1, HLBC Division, Channarayapatna during office hours on all working days. It may be noted that if any of the calendar of any event mentioned above happen to be General Holiday / Declared holiday, the next working day will hold good for the respective events

The work includes all lead and lift / delift and work shall be carried out as per instruction of engineer-in-charge of the work. And all the specification as per Indian road congress and all relevant Indian codes. The rate for the specifications in the Schedule-B includes all lead and lift, irrespective of distance and height

The intending bidders should note that if any of the land either in part / parts or in whole required for the work , it shall be the responsibility of the bidder to take possession of such land and start the work by obtaining necessary consent of the land owners before commencement of work at no extra cost to the Nigama and no claim what so ever relating to non-availability of land will be entertained

The undersigned reserves the right to either postpone or to cancel the entire process of tender

If CNNL wishes to engage third party consultants for quality control assessment, apart from the CNNL quality control and field tests, the contractor should co-operate with both Quality control authorities and the third party.

Defect liability period will be 5 Years ( including operation and maintenance period of 5 years ) from the date of completion and satisfactory commissioning and should supply tools and spares after completion of operation and maintenance period

Performance security Within 20 days of receipt of the letter of acceptance, successful tenderer shall deliver to the employer a security deposit in any of the forms given below for an amount equivalent to 5.00% of the contract price plus additional security for unbalanced tenders in accordance with the clause 25. 5 of ITT and clause 43 of the conditions of the contract. Bankers cheque/ Demand draft/ FDR/ Bank Guarantee in favour of Executive Engineer, No.1, HLBC Division, Channarayapatna payable at Channarayapatna (Bank Guarantee should be valid till completion certificate issued by Competent authority)

Building and other construction workers welfare cess The contractor shall subscribe 1.00 percent of gross amount of each bill payable to him in respect of contract to the building and other construction workers welfare cess as per GO No LD 300 LET 2006, Bangalore, dated 18-01-2007. The amount of subscription will be recovered out of payable amount to him in each bill. This component is deemed to have been included in the quoted rate / Item rate

Design and drawing pertaining to the work should be got approved by the competent authority of CNNL before execution of work

The Tenderer should furnish the Name of the individual / firm/ Company/ Joint venture with address and telephone number with place of registration, year of incorporation etc

The application made by the firm / company /Joint venture shall be signed by a person holding the power of attorney, in which case the Tenderer should furnish a copy of power of attorney shall be submitted.

The Tenderer should furnish a copy of the Income Tax Return for the preceding five financial year (2021-22 to 2025-26)

The Tenderer should furnish a copy of Sale Tax/Clearance Certificate of the preceding five financial Year (2021-22 to 2025-26)

The CNNL reserves the right of rejecting all or any of the tenders without assigning any reasons, if the rate(s) Quoted by tenderer for any item(s) of works is/are below the estimated rates, of the department then the contractor shall furnish an additional performance security for an amount equivalent to the difference between the cost as per quoted rates and the estimated rates. In case of contractor quoting rate above 125% of the estimated rates, then the amount over and above 125% will be withheld during the progress of work. Additional performance security and fixed security deposit as per KW rules should be given at the time of execution of agreement.

Employees Provident fund Registration Certificate a)In respect of Contractors who are not registered with the EPF Employees Provident Fund) authorities, the contractors should produce an undertaking that he shall within 7 days of the close of every month submit to the Executive Engineer, No.1, HLBC Division, Channarayapatna, a statement showing the recoveries of contributions in respect of employees employed are through in and shall also furnish under the provision of the scheme to the commissioner EPF.b)However, having given an undertaking to this effect if the contractor does not furnish the information, the Nigama will deduct the necessary amount from the amount due from the contractor. Notwithstanding the above, the contractor will be liable for any consequential penalty /damages levied by the EPF authorities.

The necessary certificates / documents in support fulfilling qualification criteria stipulated separately shall be scanned and attached to Karnataka Public Procurement document. The original document shall be produced at the time of opening of tender containing the Technical Bid for verification to Executive Engineer, No.1, HLBC Division, Channarayapatna.

The Bidder should also furnish the list of work on hand with all details. Such as bid cost, date of entrustment, stipulated date of completion, actual date of completion, completed cost of work etc.,

Necessary certificates should be signed by an officer not below the rank of the Executive Engineer or equivalent competent authority and should be countersigned by the superior officer not below the rank of Superintending Engineer or equivalent competent authority.

The intending Bidder/firm/company/Joint venture should furnish list of man power available with him for taking up above work.

The intending Bidder/firm/company/Joint venture shall provide evidence that it has been actively engaged in the similar nature of work prior to the date of submission of application, in the role of prime contractor, Management contractor.

The intending Bidder/firm/company/Joint venture shall provide accurate information on the related application form about any litigation or Arbitration resulting from contracts completed or on going under its execution over the last five years. The consisting history of awards against the tenderer may result in failure of the application.

The intending Bidder/firm/company/Joint venture shall provide the audited balance sheets or other financial statements acceptable to the employer for the last five years (2021-22 to 2025-26) and must demonstrate the current soundness of the applicants financial position and indicate its prospective long term profitability. If deemed necessary the employer shall have the authority to make enquiries with the applicants bankers.

The intending bidders are advised to visit the site of work before attending the pre-bid meeting and also before submitting the tenders.

Joint ventures as per KW6 Tendering by a joint venture of Contractors is permissible subject to following conditions a If the Applicant comprises a number of firms combining their resources in a joint venture, the legal entity constituting the joint venture and the individual partners in the joint venture shall be registered and shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by GOK.

b) The joint venture must satisfy collectively the Qualification criteria. For this purpose the following data of each member of the joint venture may be added together to meet the collective qualifying criteria. 1) average annual turnover (sub clause.2a).2) particular experience including key production rates. (sub clause 3.2b &3.2c).3)financial means (sub clause 3.3d 3.4 & Instructions to Tenderers xvi).4)personnel capabilities (sub clause 3.2f).5) equipment capabilities (sub clause 3.2e).Each partner must satisfy the following criteria individually General construction experience for the period of years stated in bid document (Instructions to Tenderers xiii)2.Adequate sources to meet financial commitments on the other contracts (sub clause 3.5).3. Financial Soundness (Instructions to Tenderers xv)4. Litigation History (Instructions to Tenderers xiv)In accordance with the above, the Application shall include all related informationrequired for individual partners in the joint venture.

c) Joint venture is allowed as per item No.2.2 above. One of the partners, who is responsible for performing a key function in contract management or is executing a major component of the proposed contract, shall be nominated as being in charge during the tendering periods and, in the event of a successful tender, during contract execution.

d)The partner in charge shall be authorized to incur liabilities and receive instructions for and on behalf of any and all partners of the joint venture this authorization shall be evidenced by submitting a power of attorney signed by legally authorized signatories of all the partners.

e) All partners of the joint venture shall be legally liable, jointly and severally, during the tendering process and for the execution of the contract in accordance with the contract terms, and a statement to this effect shall be included in the authorization mentioned under Sub-Clause 2.2(d) above. To enable the above, each of the partners of the joint venture shall meet not less than 25% of the qualifying criteria specified for Average annual turnover and Line of credit / liquid assets. In joint venture one of the member must have experience and satisfy in execution of similar works stated in sub clause 3.2(b) and 3.2(e).

f) A copy of the Joint Venture Agreement (JVA) entered into by the partners shall be submitted with the Application. Pursuant to Sub-Clauses 2.2(d) to 2.2(e) above, the JVA shall include among other things the JVs objectives the proposed management structure the contribution of each partner to the joint venture operations the commitment of the partners to joint and several liability for due performance recourse/sanctions within the JV in the event of default or withdrawal of any partner and arrangements for providing the required indemnities.

g)The qualification of a joint venture does not necessarily qualify any of its partners to tender individually or as a partner in any other joint venture or association. In case of dissolution of a joint venture prior to the submission of tenders, any of the constituent firms may qualify if they meet all of the qualification requirements, subject to the return approval of the employer. Individual members of a dissolved joint venture may participate as subcontractor to qualified applicants, subject to the provisions mentioned below:

h) No firm can be a sub contractor while submitting a tender individually or as a partner of a joint venture in the same tendering process. A firm, if acting in the capacity of sub contractor in any tender, may participate in more than one tender, but only in that capacity. A tenderer who submits, or participates in, more than one tender will cause all the proposals in which the tender has participated to be disqualified

The requisite earnest money deposit (EMD) through online only with validityof 225 days from the last date of Receipt of Tenders. The tender schedulewill be issued to the applicants who make payment through ONLINE only.

On account of restrictions on sand mining and scarcity of availability of sand, as an alternative the use of manufactured sand (M-sand) confirmingto relevant IS specifications may be allowed during the work

Successful bidder should submit the PERT Chart at the time of Execution of Agreement.

Successful bidder should execute work agreement within 20 days from the date of issue of Letter of acceptance, failing which his tender will becancelled on Risk & Cost basis &his EMD will beforfeited.

Related to qualification condition No :2, Idle charges for men & machineries for non-progress period delayed due to any reasons will not be paid.

As per FD GO dated 26.03.2019, NSIC exemption for EMD is not accepted.

As per Government order No:DPAR 154 e-Gov2024 dated:23/07/2024 Contract management module has to be mandatorily followed by the Contractor

The Quoted amount should be inclusive of ESC deposit charges as per prevailing orders.

Earnest money Deposit (EMD) can also be submitted As per circular of FD5Expenditure-12/2023 Dt:10.02.2023, in the form e-Bank Guarantee

The scanned signature of the bidders / authorized representatives of the bidders shall be attached while uploading the Bid document

Employees provident fund registration certificate along with copy of recent paid challan is to be furnished

Applicable GST will be paid separately & GST will be deducted as per the prevailing Govt Orders from time to time

Increase in GST shall not be paid in extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time

Security Deposit will be released only after the expiry of the defect liability period

Sub leasing /sub contracting in any form is prohibited. Bids of bidders with track record of Sub leasing / subcontracting are liable for rejection

The quarries considered are for the estimate purpose only. The intending bidders shall visit the site, identify the quarries, ascertain availability for the quantity and quality of the materials required for the work and shall quote his rates accordingly. No extra claim whatsoever will be entertained in this regard

All precautions should be taken by the contractor so that there are no damages to such public/private Properties & to avoid any damage to the utilities during excavation as well as utility shifting

Contractor should follow strictly the prevailing rules of labor act

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects

Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost

The intending bidders should inspect & get confirm regarding availability of materials and has to make own arrangements to get the construction materials. There is no extra claims will be entertained from Nigama

The contractor should obtain the material dispatch permit for stone, aggregates, sand and murrum etc. will be used in the construction work from the mines and geology department at the time of execution and same should be submitted along with the work bill, then for such work bills no royalty will be deducted. if the contractor failed to submit the material dispatch permit (MDP) along with the work bill five times royalty will be deducted from the work bill as per KMMCR 2016 amendment rule 44(4) and circular vide no.Ga,Bhu.E/DCB/DCB/takte/2019-20/4497 dated:12.12.19 by mines and geology department

Tenders shall remain valid for a period not less than Ninety days

Contractor has to setup Field Laboratory in Site as per GO PWD/243/SEV/2013/Bangalore/Date 27-7-24

The tenders are invited as per standard tender Bid document The tenderer should go through all the tender condition All the original documents uploaded in e portal should be submitted for verification to the Executive Engineer, No.1 HLBC Division, Channarayapatna office within 2 days from last date of submission of tender, otherwise the tender is liable for rejection

In addition to the above, all the conditions, as stipulated in the tender booklet of CNNL should be followed

Contractor should Submit MDP of Every material used in the work at the time of bill submission compulsory .

The validity period for E.M.D. shall be for a minimum period of 45 days beyond the validity of the tender Technical Qualification Criteria

The contractor must upload the required necessary documents requested in the tender at the designated place, if not uploaded/submitted in the designated place the documents will not be considered

Technical Criteria

Past Experience

Each bidder/firm/company should have executed in any one year of the last five years from 2021-22 to 2025-26 the following minimum quantities of work 1. Providing and Laying DI Raising Main Pipeline 200 mm Dia & Above - 0.65 Km 2. Supplying, Erection and Commissioning of Pumps and Motors of Min Capacity of 20 HP & above - 2 Nos. 3. Construction of 66/11 KV Transmission line - 2.00 Km 4. Earthwork Excavation/Embankment - 54454.00 Cum, 5. All Grade Cement Concrete - 1168.00 Cum, 6. Steel - 37.00 Tonne 7. Pitching / Revetment - 2968.00 Sqm.

Others -- Quantities Executed

The intending bidder/firm/ company / Joint Venture satisfactorily completed, as a prime contractor, at least one similar worksuch as Lift tank filling scheme which include civil works like Construction of Pump House & Intake, Electro Mechanical Works, Pumping Machinery, Rising main, Gravity Mains Including Improvements to Tank works costing not less than Rs.188.00 lakhs (usually not less than 50% estimated value of contract) in the last five years 2021-22 to 2025-26/ preceding 5 years. An additional weightage of 10% each year will be added to the cost of the work done to bring it to the 2026-27 price level. Certificate should be obtained from the officer not below the rank of Executive engineer and counter signed by the Superintending Engineer shall be furnished. The value of the completed work shall be given a weightage of 10% per year to bring them to the price level of the F.Y. in which the tenders are invited

Work Done Certificate

Capabilities of Vendor

The intending bidder should furnish the KPWD Class-I and above Contractor certificate of registration issued by State/Central govt. organization.

PWD Registration Certificate (Class I/II/III/IV)

The intending bidder/firm/ company / Joint Venture should be an individual Super grade licensed govt. electrical contractor / tie up agreement with Super grade licensed govt. electrical contractor enrolled in KPTCL/ CESCOM or equivalent companies

Others -- Electrical License

List of Key Technical personal required for the work are as under and should be enrolled in firm/company/ Joint venture and their Employment register and document should be uploaded List of Minimum Technical Required For Execution (1) Project Manager - BE Civil with Minimum of 15 years experience & should have been project Manager for at least one Project/work of size similar to the present contact - 1 No (2) Civil Engineer - BE Civil with Minimum 5 Years experience - 1 No (3) Electrical Engineer - BE Electrical with Minimum 5 Years experience - 1 No & (4) Mechanical Engineer - BE Mechanical with Minimum 5 Years experience 1 No. List of Minimum Non-Technical Personnels Required For O & M Execution (1) Electrician - 2 years Experience - 1 No (2) Pump Operators - 2 years Experience - 1 No & (3) Helper

Others -- Staff details

Tenderers will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity-(AxNx1.5-B) where, A-Maximum value of civil engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value at (updated to 2026-27 price level) of existing commitments and on-going works to be completed during the 1.5years (period of completion of the works for which Tenders are invited) (period of completion of the works for which Tenders are invited)

Others -- Bid Capacity

Reports on the financial standing of the tenderer, such as profit and loss statements / Balance Sheets and auditors reports for the last five years

Others -- Balance sheet

A valid copy of GST registration certificate

GST Registration

A Copy of the Income Tax returns filed for the year 2021-22 to 2025-26 should be uploaded.

ITR Filed Copy (Mentioning PAN)

List of existing commitments and ongoing works details should be uploaded along with indent numbers.

Others -- Ongoing Works Details

List of works for which tenders already submitted, details should be uploaded along with indent numbers.

Others -- Tenders Already Submitted

The intending bidder/firm/company/Joint venture should furnish the details of (50% ownership/50% lease) Machinery/Equipments like RC FC Lease Agreement etc., (Current year) as mentioned below of the following minimum requirement of machineries for each of the above said works. 1. Excavator - 4 Nos. (2 Nos. own and 2 Nos. own/ Lease) 2. Tippers - 8 Nos. (4 Nos. own and 4 Nos. own/ Lease) 3. Self-Loading Concrete Mixers - 2 Nos. (1 No own and 1 No Lease) 4. Crane - Capacity 7.5 MT Tonnes above - 2 Nos. (1 No. own and 1 No. own/ Lease)

Others -- Machineries

A valid copy of EPF registration certificate

Valid EPF Certificate

A valid copy of ESI registration certificate

Valid ESI certificate

Financial Status

The intending bidder/firm/ company / Joint Venture should have (in the last five years i.e. from 2021-22 to 2025-26 preceding 5 years) achieved in at least two financial years a minimum financial turnover of Rs.752.00 Lakhs. (Usually not less than two times the estimated annual payment under this contract). Audited profit and loss account balance sheet certified by the chartered accountant along with the turnover certificate for the above-indicated years along with IT returns filed for the said years all to be uploaded with the technical bid. An Additional weightage of 10% for each year will be added to bring it to the 2026-27 price level. Submit the civil engineering construction works turnover details Along With Valid UDIN.

Audited CA Certificate of Annual Turnover

The bidder / firm/ company should furnish details of liquid assets availability or availability of credit facilities of not less than Rs. 103.00 lakhs ( As per Clause 3.3 (b) page 6 K/W-4, KTPP Act, GO No. FD 4 PCL 2008) (usually the equaivalent of the estimated cash flow for 3 months in peak construction period) the work mentioned above for meeting the required funds in the form of credit lines / letter of credit / certificate from any Nationalized Banks/ Scheduled banks. (format to be as prescribed as per Finance department Circular No.: FD-CAM/16/2022(P-2) Dt: 22.08.2022)

Line of Credit

Work Locations

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹5.6 L

Important Dates

Last Activity

10 Aug 2026

Published

10 Aug 2026

Bid Opening

31 Aug 2026

Download Ends

29 Aug 2026

Pre-Bid Meeting

14 Aug 2026

BOQ Preview

•

Scheme to lift water from Appannappankatte to fill Kudukundi Hosakere and Atthikatte in Arasikere taluk Hassan district.

•

Survey, Investigation, Planning and Design with drawings for all components of the scheme for Supply, Installation, Testing and Commissioning of the "SCHEME TO LIFT WATER FROM APPANNAPPANAKATTE TO FIL...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing casing embankment using semi-pervious / pervious soil from approved borrow areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, machinery, labour, all othe...

•

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...

•

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

•

Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...

•

Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour etc complete with all leads and lifts loading and unl...

•

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after all dirt, dust, mortar drops and foreign...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

•

Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including plugging the joints with selected earth, cost of all labo...

•

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction etc complete with ...

•

Design, fabrication, supply, erection and commissioning of embedded parts consisting of liners for trash rack grooves ( for coarse and fine screens) with all accessories for pump house inta...

•

Design, fabrication, supply, erection and commissioning of trash racks consisting of a number of structural steel panels of suitable height with vertical trash bars at wider interval and weld me...

•

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...

•

Providing and laying Ductile Iron pipes of class conforming to IS 8329:2000 with latest amendments, conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect ...

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

•

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

•

Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations etc complete w...

•

Cutting of Trees, excluding removal of stumps and roots of trees - (i) Girth from 300 mm to 600 mm

•

etc complete with all leads and lifts loading and unloading charges as directed by the Engineer in ch...

•

Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labour, hand ...

•

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

•

Providing sand cement bed with 5% cement with all leads for all materials and lifts machine mixed, laid in layers of 15 cms. Thick and well compacted for foundation including curing cost, cost of all ...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

De-silting of Feeder Channel/Canal in dry condition by excavating the deposited bed material and disposing off the same by stacking/ formation of Embankment or as directed including cost of all machin...

•

Providing and constructing 450mm thick dry size stone pitching using 200 to 250 mm size stones with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all mate...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Bid Document.docx

Tender Document • 2.72 MB

clause-29.docx

Others - Clause-29 • 0.01 MB

Corrigendum Documents

Addendum.pdf

pdf • 1.40 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

To Be Opened

Works

Other Works

Scheme to lift water from Appannappankatte to fill Kudukundi Hosakere and Atthikatte in Arasikere taluk Hassan district.

Cauvery Neeravari Nigam Limited

CNNL No 1 HLBC Div CR Patna | Gorur, Karnataka

Amount: ₹3.8 CrCloses: 29 Aug 2026Closed

Timeline

Published10 Aug 2026
Pre-Bid Meeting14 Aug 2026
Closed29 Aug 2026
Bid Opening31 Aug 2026