Renovation of existing Generator Room at CHC, B/Flat under B/Flat SD, RCD, W/Gunj SW SITC of New Outdoor Panel Board in place of old damaged Panel and Prdg. IEI to Generator Room of CHC B/Flat

Supplying Installation, testing and commissioning of outdoor type floor mounted cubical Feeder Box non extendable type LT osf size 1.20m x 1.00 m x 0.5 m, 3 phase, 440 V, 320 A with both side open i/c front double hang shutter with locking arrangement made with 2 mm thick CRCA sheet, MS Angle, MS flat etc in different compartments to accomadate various size of 1 switch gears and accessories as stated under etc i/c interconnection with suitable rating copper cable. The Panel should have inner earthing with 1 coat of primer & 2 coat of finishing water proof paint (Silver), fixing of danger plate & PCC work etc as required. A) MCCB 320 A, 4P, 50 kA breaking capacity - 01 No. (incomer) B) MCCB 160 A, 4P 25 kA breaking capacity Nos. (outgoing) C) On-Load Changeover Switch Open Execution 200 Amps, 4 Pole D) Cut out 320 A/415V E) Aluminium Bus Bar 40 x 5 mm F) Indicator Panel for RYB with Ammeter & Voltmeter for RYB

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc as read. a) Group C'

Wiring for light / power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for Circuit / Sub Main wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire

Supplying and fixing following piano type switch/socket on the existing switch box/ cover including connections etc. as required. a) 5/6 A switch

b) 3 pin 5/6 A socket outlet

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required a) 200 mm X 150 mm X 60 mm deep

Supplying of pre-wired for LED, power saving Decorative box type LED tube Batten fittings, 4' powder coated for similar to BAJAJ IVORA® LED BATTEN and 4'x 25 watts High efficiency, power 4 saving LED Batten Cat No. 830258 Bajaj IVORA® LED Batten 25W CDL or its equivalent etc., as required.

Supplying of Energy Saving BLDC, 5 star rated, A.C. Ceiling fan 1200 mm sweep (White), with all accessories and Step type electronic Fan regulator. (Similar to HAVELLS Efficiencia DX BLDC, Cat No. FHCEO5SWHT48 or equivalent).

Installation, testing and commissioning of wall bracket/ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring with the down rods of standard length (up to 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing of Street Light luminaries 25 Wattage, with pressure die cast aluminium housing heat resistant glass i/c Clamping arrangement with GI Pipe etc., as required. 1 (Equivalent to BAJAJ EDGE NXT Cat. No. ENXT P 25L WH PO PC SD) or its equivalent etc., as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, 3 washer excavation and re-filling etc. as required

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 6 Way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 'C' curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with 4 connections, testing and commissioning etc. as required. A) Single pole

Supplying and fixing following rating, double poles, 240 volts, isolater in the existing MCB DB complete with connections, commissioning etc. as required. testing and 1 A) 40 Amps