Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 CrAccepted-Finance | ₹3.0 Cr | L1 | Accepted-Finance Accepted |
| 2 | L2₹3.5 CrAccepted-Finance | ₹3.5 Cr | L2 | Accepted-Finance Accepted |
| 3 | L3₹3.6 CrAccepted-Finance | ₹3.6 Cr | L3 | Accepted-Finance Accepted |
| 4 | L4₹3.6 CrAccepted-Finance | ₹3.6 Cr | L4 | Accepted-Finance Accepted |
| 5 | L5₹4.0 CrAccepted-Finance | ₹4.0 Cr | L5 | Accepted-Finance Accepted |
Tender Value
₹4.5 Cr
EMD Value
₹9.1 L
Closing Date
17 Aug 2026, 3:00 pmClosed
EE CD-XIX I and FC Deptt. Govt. of NCT of Delhi.
EE CD-XIX I and FC Deptt. Govt. of NCT of Delhi, Basaidarapur Office Complex, New Delhi-110027.
Construction of RCC storm water drain from Ghalibpur Daurala road to the N.G. drain at village Galibpur in Matiala Assembly Constituency AC-34.
2026_IFC_296697_1
EE/CD-I/DB/2025-26/84
Open Tender
Civil Works
Works
120 days
Galibpur
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹9.1 L
18 Aug 2026
7 Aug 2026
17 Aug 2026
7 Aug 2026
17 Aug 2026
7 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. | 2,790 | Cubic Metre | 260.3 | ₹7,26,237 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). | 279 | Cubic Metre | 6,812 | ₹19,00,548 |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete | 2,005 | Square Metre | 392.15 | ₹7,86,260.75 |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | 8,370 | Square Metre | 842.5 | ₹70,51,725 |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform | 1,526 | Square Metre | 927.25 | ₹14,14,983.5 |
| 6 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum | 1,436 | Cubic Metre | 9,504.75 | ₹1,36,48,821 |
| 7 | Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge. | 291 | Square Metre | 3,081.95 | ₹8,96,847.45 |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | 1,69,131 | Kilogram | 107.85 | ₹1,82,40,778.35 |
| 9 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | 2,790 | Cum | 263.95 | ₹7,36,420.5 |
| 10 | Hire charges of JCB machine for demolishing steps, platforms encroachment etc. coming in the alignment of side drain including making plain the undulations etc. complete (A/R) | 32 | Per Hour | 1,395.96 | ₹44,670.72 |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 5.67 MB
BOQ_395067.xls
BOQ • 0.28 MB
Corrigendum.pdf
PDF • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].