REPAIR TO SUNKEN FLOOR DADO SOIL WASTE VENT WATER SUPPLY PIPES SANITARY FITTINGS PLUMBING INCLUDING CLEANING OHTs IN C1 AND C1A AREA AND REPAIR TO COMPOUND WALL FENCING CONCERTINA COIL DRAIN CULVERT MISC ITEMS AT C1A AND ZONE B UNDER GE(EAST) MATHURA

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for coloured Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for coloured Glazed ceramic tiles on vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over and including 10 mm thick backing coat of cement mortar in 1:4 complete all as specified and directed.

M&L for light shade double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Demolition of concrete of any description and position not otherwise specifically provided for as in sunken floor etc. complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) in lintel upto 1.5 m span, coping, kerbs, stops, cills, bed plate and the like complete all as specified and as diected.

M&L for cement concrete 1:7:12 type F2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and as directed. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved by GE

M&L for 50 mm thick sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 complete all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4 , type B-1 (using 20 mm graded aggregate) as in leveling course, floors etc complete all as specified and directed.

M&L for 75 mm thick cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brick work with old size fly ash Bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls,concrete surface etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of concrete surface in ceiling in cement mortar 1:3 finished even & fair complete all as specified and as directed.

M&L rendering 15mm thick on fair face of brick work/concrete in cement mortar 1:4 by mixing liquid water proofing compound as per manufacturers instructions finished even and fair complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over and including a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of Alkali resistant primer complete all as specified and as directed.

S&F in repairs high density polythene pipe 32 mm bore (HDPE) of pressure @ 6 Kg/Sqcm laid in trenches complete all as specified and as directed.

S&F in repair PVC floor trap plain 75 mm dia of outlet with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair Salt-glazed stoneware gully traps of size 150mmx 100mm, square or round mouthed, tvpe 'P' and setting and jointing in cement mortar 1:1 complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR ) vent cowl complete all as specified and as specified.

S&F in repair 110 mm bore PVC (SWR) bends any radius with oval access door complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) bends with access door any radius complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) plain bends any radius complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) junction (Single T) equal or unequal complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F in repair Pillar Cock with extended Lever Handle for Medical use, fixed in wash basin/sink complete all as specified and as directed.

S&F in repair Single Lever Elbow Basin Mixer with 150 mm long Braided hoses extended operating Lever for Surgical purpose complete all as specified and as directed.

S&F in repair stainless steel Toilet Roll Holder fixing to wall complete all as specified and as directed.

S&F in repair brass chromium plated Single Lever Basin Mixer with 450 mm long braided hoses complete all as specified and as directed.

S&F in repair stainless steel Towel Rack 600 mm long with lower Hangers complete all as specified and as directed.

S&F in repair brass chromium plated Wall mixer with 115mm long Bend pipe, connecting legs & wall Flange complete all as specified and as directed.

S&F in repair stainless steel Towel Rail 600 mm long with end brack complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removal from site complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal from site complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm with or girth of brick walls complete all as specified and as directed.

Refixing old steel tubing15 mm bore and connections in new or old position ( wall, ceiling ,floors etc )complete all as specified and as directed.

Refixing old steel tubing 20 mm bore and connections in new or old position ( wall, ceiling ,floors etc )complete all as specified and as directed.

Supplying & fixing steel tubing ,galvanised, medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

Supplying & fixing steel tubing ,galvanised, medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

S&F in repair long body bib taps cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipes15 mm bore dia complete all as specified and as directe.

S&F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe 15 mm bore dia (minimum weight 90gms) and fixed complete all as specifed and as directed.

S&F in repair stop/Angular valve, cast copper alloy, chromium plated, fancy type with crutch or butter fly handle, screwed down, screwed both end for iron pipes 15 mm dia bore complete all specified and as directed.

S&F in repairs stop valve cast copper alloy,fancy type, chromium plated with long shank and cup (Concealed type)screwed down, screwed both ends for iron pipe 15 mm dia bore complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm including brackets, brass chromium plated waste fitting for 32 mm bore discharge pipe, pillar tap cast copper alloy chromium plated, fancy type with capstan heads,screwed down high pressure,with or without letters Hot or Cold with long screwed shank and fly -nuts, screwed for iron pipe 15 mm bore dia complete all as specified and as directed.

S&F in repair PVC cabinet with mirror of size 350 mm x 450 mm, fixed to wall with screws complete all as specified and as directed.

S&F in repair pillar tap cast copper alloy chromium plated, fancy type with capstan heads,screwed down high pressure,with or without letters Hot or Cold with long screwed shank and fly -nuts, screwed for iron pipe 15 mm bore dia complete all as specified and as directed.

S&F in repair 32 mm bore PVC flexible waste pipe 750 mm long for urinals and wash basin complete all as specified and as directed.

S&F in repair sheet glass shelf assembly consiting of 5.5 mm sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repairs corner racks with glass of size 300x300mmx8mm thick, bevelled on edges with CP two brackets complete all as directed.

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe (minimum weight 40gms) complete all as specified and as directed.

S&F Shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minimum weight 40gms) complete all as specified and as directed.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, complete all specified and as directed.

S&F in repair colour european type combination pattern WC casket type christinna with mounted flushing cistern,PVC connection,seat cover and jointed to sewage pipe complete all specified and as directed.

S&F in repairs PVC Jet for EWC complete set complete all as specified and as directed .

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging devices complete all as specified and as directed.

S & F in repairs Viterous china squatting pan, Órissa' pattern, size 580 x 440mm white, with integral foot rests including connection and fitting to trap, and to flushing pipe complete and making good to wall or floor tilling to match the existing complete all as specified and as directed.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F in repairs PVC syphon kit complete for low level 10 liter capacity flushing cistern complete all as specified and as directed.

S&F in repairs PVC (White) valve less syphonic action type, flushing cistern10 ltrs low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with gutties embeded in wall with drilling machine etc complete all as specified and as directed.

S&F in repair two way angle cock cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes 15 mm bore dia complete all as specified and as directed.

S&F in repair Health faucet of superior quality ABS body with 8 mm dia 1.2 m long flexible tube and wall hook complete all as specified and as directed.

S&F in repair waste coupling for 32 mm bore discharge pipe size chromium plated for glazed ware sink basins, etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair waste coupling for 40 mm bore discharge pipe brass chromium plated for sink, etc with long screwed shanks and fly nuts flanges end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair PVC connections 15 mm size with PTMT nuts at both end of 600 mm long complete all as specified and as directed.

S&F in repairs stainless steel towel rail 600 mm long 20 mm dia fixed with steel screw etc complete all as specified and as directed.

S&F in repair stainless soap dish 100mm x 75mm size fixed to wall complete all as specified and as directed.

S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm bore dia (Minimum weight 210 gms) complete all as specified and as directed.

S&F in repairs cover for HDPE water tank of capacity 500/1000 ltrs rotating type including frame and nut bolt complete all as specified and as directed.

S&F in repairs mild steel chromium plated grating (round) 125 mm dia fixed over floor/nahani trap (with hole/without hole) complete all as specified and as directed.

Supply and fix in repair 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm bore dia complete all as specified and as directed.

Supply and fix in repair 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm bore dia complete all as specified and as directed.

Cleaning of HDPE tank of capacity exc 250 & n,exc 500 litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing where directed complete all as specified and as directed.

All as per item Serial No 83.00 but capacity of tank exc 500 litre but not exc. 1000 litres complete all as specified and as directed.

S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes 20 mm bore dia complete all as specified and as directed.

S&F in repair stainless steel kitchen plate rack of size 31" x 30" x 10" deep, fabricated out of 0.63 mm sheet fixed in position on wall complete all as specified and as directed.

S&F in repair sinks made of stainless steel lmm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness (except ceramic tiles) in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like laid over and including 20mm thick screed bed in cement mortar 1:4 and pointing in white cement (1:2 )using marble dust with admixture of pigment to match with shade of granite, including rounded/half rounded edge and providing hole for gas pipe in pre-cast slab as well as in granite slab of cooking platform complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair 15-20mm (20 mm outer dia) GI reducer complete all as specified and as directed.

S&F in repair 20 mm bore GI Union complete all as specified and as directed.

S&F in repair 20 mm bore GI Elbow complete all as specified and as directed.

S&F in repair 20 mm bore GI socket complete all as specified and as directed.

S&F in repair 15 mm bore GI Tee complete all as specified and as directed.

S&F in repair 15 mm bore GI Union complete all as specified and as directed.

S&F in repair 15 mm bore GI Elbow complete all as specified and as directed.

S&F in repair 15 mm bore GI socket complete all as specified and as directed.

S&F in repair 15 mm bore 150 mm long Nipple all as specified and as directed.

S&F in repair 15 mmbore 100 mm long Nipple all as specified and as directed.

S&F in repairs 15 mm bore GI nipple fully threaded with two numbers check nuts and washers for PVC tank, 100mm long to PVC tank with back nut and washers for inlet and outlet pipe complete all as specified and as directed.

S&F in repairs 20 mm bore GI nipple fully threaded with two numbers check nuts and washers for PVC tank, 100mm long to PVC tank with back nut and washers for inlet and outlet pipe complete all as specified and as directed.

Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (Reinforecement cut as required to facilitate demolition) complete all as specified and as directed.

Use & waste of Form work to sides and soffits of floor or roof beams, lintels, cantilever, shelves etc for rough finished surface of concrete complete all as directed.

M&L for renforcement cement concrete 1:1.5:3, (using 20 mm graded stone aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5mm span complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B0 (using 20 mm graded stone aggregate) as in louvers and jallies 40mm thick (measured solid) including all mouldings set in CM 1:4. complete all as specified and as directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and as directed.

M&L for form work to soffits of suspended slabs such as roof slabs, landing and similar work n. exc 200 mm thick, (Horizontal or sloping) for rough finished surface of concrete complete all as specified and as directed.

M&L for form work to edges of concrete flat, floor and roof floor slabs not exceeding 20 cm wide and similar work exc 10 cm but n. exc 20 cm wide for rough finished surfaces of concrete complete all as specified and as directed.

M&L for Reinforced Cement concrete 1:1.5:3 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for Rendering 10 mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 and finish surfaces even & fair complete all as specified and as directed.

Dismantling wroght iron or mild steel work of any description not other wise provided for complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed trusses etc complete all as specified and as directed..

Taking down steel gate of any size dismantling pintel hinge, providing new hinges of 15mm dia MS round bar 100 mm long fixed over and including MS angle of size 50x50x6mm embedded in an including PCC bed block of cement concrete type B-1 1:2:4 of size 200x200x400mm including applying one coat of synthetic enamel paint over complete gate complete all as specified and as directed.

S&F for MS framed work as in doors or gates of angle or other sections with gasset plate rails braces etc complete drilled for fixing of steel sheeting or other covering to doors etc to be prepared for hanging or sliding with and including either hooks and pintel hinges or steel hanging door etc complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in bed blocks for fixing hold fasts and filling of chowkhats etc complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out portion embedded in concrete, Brick work masonry etc and making good disturbed area complete all as specified and as directed.

S&F MS work as in posts and struts in fencing posts including cutting taps to shape, as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh) including all necessary drilling, bolting or revting etc and similar work confirming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Supply only chain link MS galvanised fencing any size or type n.exc 4 kg/ Sqm.complete all as specified and as directed.

Fixing only chain link fencing including line wire any mesh, size and tied to any type of standards, rails, straining bolts etc including provision of binding wire. complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in Surface channels and drains etc complete all as specified and directed.

Dismantling galvanised 2 strand, steel barbed wire in fencing complete all as specified and as directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm, dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire staples or steel pins etc complete as specified and as directed Note: (Each line wire to be measured)

S&F galvanised punched type concertina coil of loop dia 1050 mm (dia of coil when unstretched) fixed to existing angle post strut and tying at three places ie two bottom & one at top with 3.15 mm dia galvanised mild steel wire complete as specified and as directed

Restraining and resecuring including making good staples etc of Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm barbs at 75mm spacing fixed to any type of straining bolts all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (Below or above ground level) complete all as specified and as directed.

M&L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base, sub floor and paving etc complete all as specified and as directed.

M&L for Chequred Cement concrete tiles with grey cement and pigments 30cm x 30cm x 25mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors, laid over and including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M&L for sand filling under floors including watering and consolidation complete all as specified and as directed.

S&F Machine pressed precast concrete interlocking paver block with gray cement and pigment of any shape and size confirming to IS 15658-2006 of 80mm thick, M-40 Grade complete all as specified and as directed.

M&L non skid coloured cermic ENDURA tiles 10mm thick (square/rectangular) exc 0.06 Sqm but n. exc. 0.11 Sqm set and jointed in neat cement slurry & pointed with coloured cement to match in floor laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in floor/ hard standing, finishing the surface even and smooth without using extra cement. complete all as specified and as directed.

M&L for prepration of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.

M&L for welded steel wire fabric supplied and fixed to wood or steel members weight n exc 4kg/Sqm complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm as in soft/loose soil complete all as specified and as directed.

M&L for mild steel round bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) as in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sqcm, with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

Returning, filling in, soft/loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removing excavated material to distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

B S ENTERPRISES

KASHI NATH BANWARI LAL

M/s Hoti Lal Contractor