Repairing and Painting work in all sheds, Gates and new Bus Bar at workshop Aliganj.

Amount

After Removing the Rust by rubbing the old iron angle & iron pillor installed in all four sheds(every sheds have approx. 25 pillor & height 10 to 25 feet , 40 support angle & length 10 to 15 feet )with sandpaper, apply a code Primer on it then spray good quality of paints in workshop Aliganj, all man power & material & T&P charges included.

After Removing the Rust by rubbing the old iron angle & iron pillor installed under the 5 ton crane area(18 pillor & height approx. 40 feet with support angle) with sandpaper , apply a code Primer on it then spray paints in workshop Aliganj, all man power & material & T&P charges included

Work of repairing old & damaged wall with cement morang and sand with ratio 1:1:2 in all 4 sheds then apply a code putty & two code paints on it.

The work of repairing the old and damaged boundary wall (approx. 120 L x 120W feet) of the workshop with cement morang and sand with ratio 1:1:2 from both side(inner & outer ) then apply a code putty & 2 code paints work on it.

Work of removing the old paint with sandpaper of gate no. 1,2 & 3(approx. 10L x 10W feet) of workshop Aliganj applying a code of Primer and 2 code of paints and also replacing old and damaged locking system to New locking system.

The work of Supply new Flexi boards(approx. 10L x 4W feet) by Removing old and damaged flexi board on main gate and 2 other gates and Printing related work on it.

Work of writing work with yellow and black paint from place to place in all 04 sheds in workshop Aliganj, all man power & materials included.

Installed a new Enclosure Al. Bus Bar 1700mm(w)x350mm(D)x1200mm(H) with 05 no. MCCB (160-200 amp L&T) with digital VAF meter with 03 no. CTs (150/5A) with LED indicator, 02no. spreader terminals and other miscellaneous items in workshop & Division office.

Supply & Erection of 200 watt 06 no. flood lights in Gate no. 01 , 02 & 03 with wiring in PVC pipe & other miscellaneous items.

Supply and fixing of new 15 no. MS teen shed (size 1 x 3.04 & 1 x 1.82 Sqr Mtr.) with J & U bolt and washer and MS angle (including cutting and welding wherever required) near at main gate for car/bike parking in workshop aliganj.

The work of construction of new RCC plinth size ( 15L x 15B x 2 H feet) with cement morang & gitti (Ration 1:1:2) for painting area near at shed no. 02 in workshop Aliganj.

Construction of new platform size (8L x 8B x 2H feet) for testing of transformer in workshop Aliganj.

Installation of RCC plinth (5L x 4B x 2H feet) on drains for car/bike parking in workshop Aliganj.

Repair the old washing iron plinth by new MS angle & MS angle & MS sheet as per requirement (Including cutting & welding) & applying a coat of primer and 2 coat black paint on it.

M/S AVINA ENTERPRISES

M/S S.K. CONTRACTOR AND SUPPLIER