PROVN OF TOILET BLOCK FOR A MESS AND SPL REPAIRS TO BLDG NO P/1/F/2 ACCN AT DIPATOLI POCKET UNDER GE DIPATOLI

Amount

Demolition of brick work built in cement mortar or lime mortar complete of any, complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key, scrubing down with water etc, complete all as specified and directed.

Complete removal of existing treatment on wall surfaces, complete all as specified and directed.

M&L preparation of newly plastered surfaces and applying three coats of white wash on wall surfaces , complete all as specified and directed.

M&L preparation of old plastered surfaces and applying two coats of white wash on wall surfaces , complete all as specified and directed.

M&L preparation of old plastered surfaces and applying two coats of white wash on ceiling surfaces complete all as specified and directed.

M & L for applying two coats of exterior Emulsion weather proof coat white or tinted on walls/soffit of chajja (ceiling) complete all as specified directed.

M&L for preparing the old surfaces and applying one coat of exterior Emulsion white or tinted on walls and soffit of chajja (ceiling) surface complete all as specified directed.

Dismantling floor including cement mortar beding layer, complete all as specified and directed.

M & L kota stone slab flooring 20-25mm thick over including 20mm thick cement screed (1:6) and jointed including rubbing and polishing complete as per specified directed.

S&F chequered cement concrete with grey cement and pigment tiles 20cm x 20cm x 25mm thick including 20mm thick cement screed (1:6) set and jointed in neat cement slurry in floors, complete all as specified and directed.

Demilition of cement contrete of any discription and in any position not otherwise, complete all as specified and directed.

M&L for cement concrete 75mm thick 1:3:6 type C-2, (40mm graded aggregate ) as in plinth protection finishing concrete surface even and smooth with out using extra cement, complete all as specified and directed.

Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) n exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) Exc 1.50 Sqm but n exc 4 Sqm Sqm each complete all as specified and directed.

M/L 2nd class hardwood plain, solid, straight chowkhats and frame, wrought, framed rebated on solid, rounded or chamfered, put together with glue pinned at joints supply & fixed, complete all as specified and directed.

S&F factory made 35 mm thick plain framed, panelled shutter (any number of panels) with panels of timber flat on both side (fether edged), or veneered particle board medium density, wood particle board with commercial face veneers: supply and fitted to chowkats, complete all as specified and directed.

S&F factory made 35 mm thick glazed and Skelton door shutter 2nd class HW (rail and style ) open rebated and prepared to receive glass / Gauged divided in to squares with plain chamfered or rounded mitred and rebated fitted with cut and mitered beads for securing glass/ gauged etc size of members of shutters as specified in SSR Part – I section-8, clause 8.24(a) and fixed to Chowkhats, complete all as specified and directed.

Providing and fixing of powder coated aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specification and making good the adjascent surfaces :- (a) Window frame of cross section 101mm x 40 mm x 1.5 mm thick. (b) Three way track for sliding shutters of cross sections 91.80mm x 31.75mm x 1.1 mm thick. (c) Sliding shutter frame of cross section 40 x18 x 1 mm (d) Aluminium glazing strip of size 18.2 x 16.66mm (e) 4 mm thick float glass superior quality for 2 shutters. (f) IDPE rubber gasket for fixing glass (g) Locking cleat per shutter 01 Nos. (h) 02 Nos sliding rollers per shutters. (j) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm for one shutter. (k) Fixing screws for frame with wall 06 per window

S&F Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed.

S&F for 300 mm mild steel helical spring including roller and roller plate, complete all as specified and directed

S/F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm), complete all as specified and directed.

M/L cement concrete type B1,1:2:4 (20 mm graded crushed stone aggregate) as in coping, bed block , water trought and similar works including rounding, chamfered and throting, complete all as specified and directed.

M&L one coat of synthetic enamel paints on old steel surfaces over 10cm width or girth after necessary preperation of old surfaces, complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces and applying two coats of synthetic enamel paints over a primary coat of pink primer over 10cm width or girth, complete all as specified and directed.

S/F in repairs harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and directed.

M&L for roof treatment in repair by complete removel of existing old treatment and treated with following specifications :- (a) Brushing neat cement slurry @ 3Kg per Sqm on roof slab. (b) 15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC on roof slab. (c) Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface. (d) Applying modified APP polymeric membrane 3mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100 mm over laps as per manufacture's instruction. (e) Applying two coat of aluminium paint over bituminous surface of membrane. Note : Supply only WPC shall be measured and paid separately under relevant item.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Exavation over area not exc1.5mtr deep and getting out in soft/loose soil, complete all as specified and directed..

Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Removing surplus excavated soil to a distance n.exc 50 meter and depositing where directed at leveln.exc 1.50 m above the starting point , complete all as specified and directed.

M&L Reinforced cement concrete in mix (1:1.5:3) (using 20mm graded aggregates) in foundations, including rafts, footings, plinth beams etc, complete all as specified and directed.

All as per item No 32 above but in Columns, pillars, complete all as specified and directed.

All as per item No 32 above but in chajjas, complete all as specified and directed.

All as per item No 32 above but in beams and lintel, complete all as specified and directed.

All as per item No 32 above but in floor/roof slab, complete all as specified and directed.

M&L formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits of foundation and plinth beam, and similar work, vertical or batter work fair finished flat surface of concrete complete all as specified and directed.

All as per item No 37 but in columns/post, complete all as specified and directed.

M&L brick work with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in cm (1:6).complete as specified and directed.

M&L 15mm thick plastering on wall concrete surfaces in cm (1:6) finished even and smooth w/o using extra cement, complete all as specified and directed.

M&L cement concrete as in plinth type C-1,1:3:6 using 20mm graded stone aggregate complete all as specified.

M&L Cement concrete in floors 40mm thick over sub base (1:2:4) using 20mm graded aggregate finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 5 mm thick in cement Mortar (1:3) on the surfaces of ceiliing and finished the surface fair and even, complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on any faces brick work including finishing the surface fair and smooth without using extra cement with mixing of water proofing compound complete all as specified and directed.( WPC measured and paid separately), complete all as specified and directed.

M/L preparation of newly plastered surfaces of wall/ ceiling and applying a coat of wall care putty 1 mm thick to make the surfaces truly smooth, complete all as specified and directed.

M&L hard core of gauge n'exc 63 mm of broken stone or boulders deposited spread and leveled in layers n . exc 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for applying two coats of oil bound distemper over one coat of chalk whiting on plastered surfaces of wall, preparatory to distempering including preparation of newly plastered surface complete all as specified and directed.

M&L for applying two coats of oil bound distemper over one coat of primer on plastered surfaces of ceiling, preparatory to distempering including preparation of newly plastered surface complete all as specified and directed.

M&L preparing new surface on walls and applying 2 coats of cement based paint over one coat of primer on external walls, complete all as specified and directed.

S&F 10mm dia and over deformed/TMT treinforcement,cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90m dia, complete all as specified and directed.

All as per item No 50 here-in-before but 6 to 8 mm dia, complete all as specified and directed.

All as per item No 51 here-in-before but 8mm dia as in stirrups, complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm to 450X 350X 7mm thick including over10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces, complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles n.exc 0.18 sqm as in floor etc, with and including over 15 mm thick screed bed in CM(1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed.

S & F PVC door chowkhats of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing, complete all as specified and directed.

S & F mild steel butt hinges 100mm long medium weight cold rolled , complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section and fixed of 150mm size, complete all as specified and directed.

S&F 125mm size aluminium handles, cast type anodised, complete all as specified and directed.

S & F 15mm dia stop valve CP fancy type long body screwed to unioun or GI pipe etc, complete all as specified and directed.

S&F GI water tubes medium grade 15mm bore with fittings laid in floors/wals , complete all as specified and directed.

All as per item No 61 above but 20mm bore, complete all as specified and directed.

S/F vitreous China squatting pattern water closet 'orissa pattern ' size 580 x 440 mm white with integrated foot rests, complete all as specified and directed.

S&F PVC valveless syphonic action type low level flushing cistern 10 Ltr. Capacity of approved incl flush pipe of 32mm bore make, complete all as specified and directed.

S&F bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F pillar taps fancy type cast copper alloy chormium plated 15mm bore with crutch , screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F vitreous china wash basin, white flat back size 630x450mm (excluding taps, incl.CP waste coupling & PVC waste pipe and brackets), complete all as specified and directed.

Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth, complete all as specified and directed.

S&F angle valve / stop valve , cast copper alloy fancy type chromium plated with long shank and cup screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore, complete all as specified and directed.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

S&F PVC Connections 15mm size and 450mm length, complete all as specified and directed.

S&F 110mm PVC (SWR) branch pieces, single equal or unequall, complete all as specified and directed.

S&F 110mm PVC (SWR) Bends any radius, complete all as specified and directed.

S&F 110mm PVC(SWR) vent cowls, complete all as specified and directed.

S&F110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints,laid in trenches or in floors or wall complete all as specified & directed.

M&L PVC (SWR) bend any radius 75mm dia, complete all as specified and directed.

Use and waist form work to soffits of suspended slabs such as roof slabs, floor slabs n.exc.200mm thick in rough finished surfaces , complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation bed of manhole, mass concrete etc complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

S & F Powder coated aluminium ventilator louvre type with frame, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc, complete all as specified and as directed.

Framed work such as grills, grating doors or gates etc. of angle iron, flat iron with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of water tanks and similar work confirming to Fe 290, complete all as specified and directed.

M&L for preparetion of new steel surfaces and applying two coats of synthetic enamel paints over a coat of primar with red oxide on new steel surfaces over 10cm width or girth, complete all as specified and directed.

M&L Brass Chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union incl shower, complete all as specified and directed.

M&L Ball brass valves, high pressure, with polythene float and flunut complete, screwed for iron pipe or brass ferrule and fixed 20mm bore, complete all as specified and directed.

S&F 32mm waste fittings brass chromimum plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

S&F stop valves, 20mm bore dia of pipe cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed, complete all as specified and directed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. etc complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

Taking down old/unserviceable MCB DB SPN/TPN any capacity by disconnection of electric connection including MCBs,Isolators,etc and making good to disturbed surface complete all as specified and directed.

M&L point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade , drawn through PVC concealed conduit 20/25 mm dia on wall/ceiling ,including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes ,cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: The rate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.

All as per Ser item No 93 here-in-before but one 3 Pin Socket out let 5 Amps on the same board, complete all as specified and directed.

All as per Ser item No 93 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board, complete all as specified and directed.

All as per Ser item No 93 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly, complete all as specified and directed.

Supply and fix Switch Piano type, single pole, one way 5 Amp complete all as specified & directed.

S&F Switch piano type , single pole , one way 15 Amps complete all as specified and directed.

S&F Socket out let 2-in-1 2/3 pin 5 Amps complete all as specified and directed.

S&F Socket outlet 2-in-1, 3 pin ,5 and 15 amps , flush type complete all as specified & directed.

S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed.

M&L for submain complete with 2x1.5 sqmm, single core, multi stranded copper conductor , PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)

All as per ser item No102 here-in-before but 2X2.5 Sqmm and 1X 2.5 Sqmm for Earth wire, complete all as specified and directed.

All as per ser item No102 here-in-before but 2X4 Sqmm and 1X 4.0 Sqmm for Earth wire, complete all as specified and directed.

All as per ser item No102 here-in-before but 2X 6 Sqmm and 1X 6.0 Sqmm for Earth wire, complete all as specified and directed.

Supply and fix MCB DB SPN 8 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed at site.

Supply and fix MCCB DB TPN 4 way with metal door suitable for Provision of incommer as MCCB and out going MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed.

Supply and fix in replacement MCCB 100 Amp 415 volts 16kA 4 pole complete all as specified and directed.

S&F in replacement of MCB SP 6 to 32 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S&F in replacement of MCB DP 40 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles, complete all as specified and directed.

S&F LED tube light fitting 20 watt 230 Volt ultra slim linear LED Lighting with aluminium housing & integrated electronic driver, including all internally pre-wired and inncluding connecting with flexible copper conductor cable with suitable size complete all as specified and directed.

S&F ceiling fan with electronic type fan regulator and complete with all accessories including clamp, nut bolts, etc 230 V, 1200 mm sweep, complete all as specified and directed.

Supply, Laying, connecting, testing and commissioning of XLPE LT UG cable of size 10 sqmm 2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable all as directed.

Excavation in trenches in loose/soft soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, poles/stays and struts etc and getting out including trimming sides and forming bottom surface , complete all as specified and directed.

Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.

Returning & filling in including spearing, leveling watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.

Supply and Spread dry river sand for cable cushioning in trenches all as specified and directed.Note : Punned down thickness shall be considered for measurement , complete all as specified and directed.

Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection, complete all as specified and directed.

M &L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed .Note :- i) Earthing test must be carried out in presence of Engr-in-Charge. ii) The earthing result not more than 2 Ohms or disered earth resistance value. iii) Megger required for testing will be be provided at site by the contractor. iv) Contractor shall submit earth resistance testing report before submission of bill.

M&L for lamp holder , PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed.

M&L for submain complete with 2x2.5 sqmm, single core, multi stranded copper conductor FR PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC casing / caping 20/25 mm dia as per site requirement along walls/ceiling etc including 2.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire (Phase red colour, neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)

S& building LED security light fitting 40 Watt in aluminium pressure die cast aluminium housing with high power LED as lightning sourse and lens embedded PC Cover having IP 65 protection and impect resistance of IK07 with 10 KV Built in super protection device. luminaire with high power LED as light source including suitable size of GI bracket fixed with two Nos GI clamp nut,bolt,washer etc complete all as specified and directed.

S&F PVC ventilating air fan single phase 300 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed.

S&F tubes medium grade galvanised with all fittings laid in trenches, complete all as specified and directed.

Supply, Laying on replacement ,connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable, complete all as specified and directed.

Delhi Enterprises

M/S.R.S.Chauhan and Sons

M/s Kundu Enterprises

M/s Mukesh and company

M/S SURYA BUILDERS

M/S OMANIA ENTERPRISES

HARINANDAN RAI SONS

M/S SHAMBHU SHARAN SINGH