Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹69.9 LAccepted-AOC HINDUSTAN COLONY WARDHA ROAD PULGAON 442 302 | PULGAON | WARDHA | MAHARASHTRA | 442302 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹70.7 L+₹4,039 (0.06%)Rejected-AOC BHAWANI KRUPA GANDHI CHOWK PULGAON | PULGAON | WARDHA | MAHARASHTRA | L2 | Rejected-AOC Not lowest bidder | |
| 3 | L3₹72.5 L+₹1.9 L (2.67%)Rejected-AOC WARD NO 1 ANVI ROAD PULGAON | L3 | Rejected-AOC Not lowest bidder |
Tender Value
₹99 L
EMD Value
₹1.7 L
Closing Date
8 Mar 2025, 6:00 pmClosed
CWE NAGPUR
Commander Works Engineer Bldg No. P-9, Sitabuldi Fort, Nagpur - 440 001 Pin-900419, C/o 56 APO
SPECIAL REPAIRS TO ROAD AT ARJUN LINE, CRLC LINE AND AROUND SPORTS GROUND IN RESIDENTIAL AREA AT CAD PULGAON
2025_MES_696047_1
86533/E8
Open Tender
Civil Works - Roads
Item Rate
180 days
GE PULGAON
As per tender document
7 documents required · 7 mandatory
₹1,000
GE PULGAON
₹1.7 L
Yes
21 Apr 2025
1 Feb 2025
10 Mar 2025
1 Feb 2025
8 Mar 2025
22 Feb 2025
Amount
Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying evenly a priming /tack coat with bituminous primer at 5Kg per 10 sqm for receiving bituminous macadam using paving bitumen grade VG-30 complete all as specified and directed.
Material and labour for premixed bituminous macadam, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with binder content (paving bitumen VG-30) of 4% by weight of total mix and 1.5% cement filler complete all as specified and as directed. Note:- Premix shall be mixed in Hot mix plant and laying with mechanical paver finisher.
Material and labour for repair to potholes not exc 1 sqm each including sweeping, with mechanical equipment, and making the surface free from dust and mud or water, scoring sunken surfaces in roads, paths, etc.by using pressure air, cutting around edges to at least 25mm in depth making good by filling in screened and graded road metal, watering and well ramming (incl supply of road metal) complete all as specified and as directed.
Material and labour for applying evenly priming/ tack coat with bituminous primer over black top surfaces at 5 kg per 10sqm using paving bitumen grade VG-30, including premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder content (minimum) by weight of total mix (bitumen VG-30) and 2% cement filler rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified and as directed. Note:- The work shall be executed by using hot mix plant & mechanical paver. The rate quoted shall be deemed to include for cement filler.
Material and labour for preparation of road surface and applying thermoplastic reflective paint in marking of minimum 2.5mm thick, single coat as in centre line and edge line road marking of 150/100mm width using 'HOT MARK' thermoplastic modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers thermoplastic requirement for glass beads shall be the table No 800.4 of MORTH specifications including spraying of glass beads etc all as per manufacturer's instructions and complete all as specified and directed.
Supply and fix road stud 110mm x 128mm x 29.5mm aluminium alloy die casted dynamically designed to bear impact load upto 25 tonne and fixed with 2 nos highly reflective reflectors and 2 nos eye bolt each on both side including taking down old one complete all as specified and directed. Make:- Dark eye cat No DA-971 or techno-commercially equivalent in 3M or as approved by GE.
Supply and fix solar road stud of size 125mm x 125mm x 25mm made from aluminium alloy and construction solar powered by nion crystal solar panel with rechargeable battery of type-I high capacity Ni-Cd with view distance of approximate 1000mtr LED-10mm, three pieces on each side are used for high brightness of different colour, back up 12 hours of continuous lighting at night including taking down old one complete all as specified and directed. Make:- Dhruv of Sinor Infrastructure cat No DA 110 techno-commercially equivalent in 3M or as approved by GE.
Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm thick (below or above ground level) complete all as specified and directed.
Material and labour for hardcore of broken stone or boulders of guage not exc 63mm deposited, spread and levelled in layers not exc 15cm thick watered and rolled/rammed to a true surface complete all as specified and directed.
Material and labour for 75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base concrete complete all as specified and directed.
Material and labour for machine pressed precast concrete interlocking paver block 80mm thickness any shape and size, with grey cement and pigment confirminh to IS 15658-2006, M-35 grade laid over sand cushion complete all as specified and directed. Note:- Sand cushioning will be measured and paid separately.
Supply and laying of sand including spreading, levelling and ramming in layers not exc 25cm thick in each layer complete all as specified and directed.
Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth as in drain and getting out in soft/loose soil complete all as specified and directed.
Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
Material and labour for precast (factory casted) cement concrete kerb stone casted in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) with plain or interlocking joint (as directed) with solid blocks, exc 10 cm in width and setting and jointed in cement mortar 1:6 complete all as specified and directed.
Surface excavation not exc 30cm deep and averaging 15cm deep including getting out in hard/dense soil for repair of road side berms complete all as specified and directed.
Material and labour for approved moorum/red bajri in road berms, spread in road berms 100mm spread thickness rolled and consolidated to gradient and camber required with light roller of capacity not less than 0.5 tonne complete all as specified and directed.
Demolition and breaking up of 300mm bore drain pipe, salt glazed stone ware set in cement mortar including PCC haunching and bedding complete all as specified and directed.
Removing demolition materials etc (other than soil payable under SSR items 3028 to 3031 in section 3 Earthwork) to a distance of 3km or under, (exc 1.0km total distance) beyond the lead included in the rates, including loading, unloading and stacking at the destination and depositing where directed complete all as specified and directed.
Material and labour for PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
Material and labour for 300mm bore reinforced concrete pipes, class NP2, laid and jointed with collars complete all as specified and directed.
Material and labour for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
Material and labour for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
Material and labour for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, siesmic and other bands, plinth courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the likes including weathering, slightly rounded or champhered angles and throating with necessary formwork complete all as specified and directed.
Material and labour for rendering 15mm thick in cement plaster 1:4 on fair surfaces of brick work or concrete surfaces, to be finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for preparing plastered or unplastered surfaces of wall and applying three coats of white wash on undecorated surfaces of wall complete all as specified and directed.
Removing excavated soil not exc 50 mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
Returning, filling in including spreading, levelling, watering & well ramming in layers not exc 25cm thick complete all as specified and directed.
NOTE : SCHEDULE OF CREDIT (Amount on page No 35 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be considered for acceptance.
M/S JAI BHAWANI CONSTRUCTIONS (BID ID -3252669)
Chintamani Constructions (BID ID -3249798)
Bidder Name
M/S.Chourasia Construction Company
Chintamani Constructions
M/S JAI BHAWANI CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .