Increasing capacity of distribution transformer against Additional Business Plan and System Strengthening work 2023-24 under Jurisdiction of EDD, CESS-III, Ciss Gomti, Lesa, Lucknow.

Amount

Safe Loading, Carriage & unloading of following Materials from Centre Store to Pit Site/J.E. Dump Store.

a- Line Material

b-TF 63 KVA

c- TF 100 KVA

d- TF 400 KVA

e- LT PVC Cable 1x400/1x630 sq.mm.

f- PCC Pole 8.5 Mtr. Long

g- 11 KV Polymeric Pin Insulator

h- Earthing Rod

i- GI wire 6 SWG

j- 11 KV Fuse Set

Dragging of PCC Pole digging of pit erection of sub-station type double pole structure on PCC Pole with fixing of necessary item such as Top Channel, along with grouting (As per RESPO Norms) Dropper Channel, 11 pin insulator with Pin & 11 KV Disc Insulator with fitting, DO Fuse set its ramming, as per RESPO Specification. Only Pole and insulator will be Provided by the Department. One Pole already exist.

Well/Pipe type earthing of with 60 Fit Deep boring and providing GI Pipe 1.5" dia ("B" Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor.

Construction of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonry in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer.

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Construction of masonry/metallic type distribution pillar of size 1x1.5x2.5 mtr. with supply & fixing of fabricated 4 nos. doors (2ft.x4ft.) made of BP sheet of 18 SWG with locking arrangement, 2 Nos. Straight MS angle 50x50x6mm (1800 mm olng) 2 nos. 500 Amp, 3 Nos. 300 Amp Henley Type Tailless Fuse Unit, 3 Nos copper bus bar of size 1000x50x6 mm and one No. Alum busbar 1000x50x6 mm including all civil material required for work. All material shall be supplied by contractor.

Fabrication, errection& commissioning of 63 KVA T/F on DP with all accessories. All material except 63 KVA T/F shall be supplied by the Contractor.

Fabrication, errection& commissioning of 100 KVA T/F on DP with all accessories. All material except 100 KVA T/F shall be supplied by the Contractor.

Fabrication, errection& commissioning of 400 KVA T/F on Plinth with all accessories. All material except 400 KVA T/F shall be supplied by the Contractor.

Dismantling of 25/16/10 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site to JE dump Store/Center Store.

Dismantling of 63 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site to JE dump Store/Center Store.

Dismantling of 250 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site to JE dump Store/Center Store.

Laying of LT PVC Cable 1x400/1x630 sq.mm. as per RESPO Norms. Only cable shall be supplied by deartment.

Fixing of 11 KV Fuse set as per RESPO Norms. Fuse set supplied by department.

GST Extra as per Rules

VIBHU ENTERPRISES

GOPI ENTERPRISES