GE/ALP (8282B) KOLKATA 2023-24

Amount

Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc. of any descriptions complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks straight of curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

All as per Item No 2 above but except brick etc complete all as pecified and directed.

Material and labour for brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc complete all as specified and directed.

Materials and labour for 15 mm thick rendering on fair faces of brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and directed (upto 12 storeys bldgs).

Material and labour for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick walls or concrete surface, finishing even and smooth (without using extra cement) etc including necessary working platform complete all as specified and as directed (upto 12 storeys bldgs).

Material and labour for 15mm thick rendering in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces finished even and fair without using extra cement including necessary scaffolding complete all as specified and directed (upto 12 storeys bldgs).

Material and labour for 10mm thick rendering in cement mortar (1:3) on concrete surface as in ceiling and finished the surface even and smooth without using extra cement complete all as specified and directed.

Demolation of cement concrete (reinforced) in any position (below or above G.L) etc complete all as specified and directed

M&L for RCC(Nominal Mix) in type-B1, 1:2:4 (using 20mm graded stone aggregate) as in foundations, including rafts,footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed.

M&L for RCC(Nominal Mix) in type-B1, 1:2:4 (using 20mm graded stone aggregate) columns, pillars, piers, posts and struts etc complete all as specifed and directed.

M&L for RCC(Nominal Mix) in type-B1, 1:2:4 (using 20mm graded stone aggregate) as in beams cantilevers, bressummers,lintels over 1.5m span etc complete all as specifed and directed.

M&L for RCC(Nominal Mix) in type-B1, 1:2:4 (using 20mm graded stone aggregate) pre cast slabs supported on walls for cup board and Kitchen slabs,manhole cover etc complete all as specifed and directed.

M&L for formwork to flat rough finished surfaces of concrete sides of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for formwork to flat rough finished surfaces of concrete sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam aunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc also splays between floors and beams, etc complete all as specified and directed.

M&L for mild steel TMT bars 10MM dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete and all as specified and directed.

M&L for mild steel TMT bars of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Dismantling of plain or corrugated aesbestos sheet any gauge, thickness in roof coverings complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.56mm of an colour having tensile strength of Alloy 31000 H4 as in ridges, Valley gutter, drip and straight to flashing (length and, fixed girth as fixed) with self tapping screws complete all as specified and directed.

Dismantling timber scantling 40 sq cm and over in section, (framed work) in any position.

S&F for steel work of MS Square/round pipe or angles, Tee etc as in purlin, rafter, post and trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specfied and directed.

S&F in repair for fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc with L-type or J-type or cranked hook bolts etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fixing for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering,doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and similar work conforming Fe-290, Gde E-165 complete all as specified and directed.

Supply and fixing for framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars, barred iron doors, iron gate, ladders; framed balusters, ways : railing : frame work of water tanks and similar work conforming Fe-290, Gde E-165 complete all as specified and directed.

Supply and Fixing in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured)

Supply and fixing in repair stainless steel razor concertina coil, fencing 600 mm Dia, consisting of spiral with sharp edged tape crimped to a steel wire duly galvanised with scrapper barb having 51 spirals with 125 clips (when strtched to a length of 6 m) and fixed in steel brackets hooked properly with GI staples and GI clips to retain horizontal, including necessary boards or GI barbed wire tied with angle iron complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) and removing debris and rubbish off the premises complete all as directed.

M&L for double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick plaster in CM (1:4) for backing coat complete all as specified and directed .

M&L for double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting etc. set and jointed in neat cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick cement plaster in CM (1:4) for backing coat complete all as specified and directed .

Material and labour for Non-Skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and directed .

Material and labour for Non-Skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15 mm thick cement plaster for backing coat in CM (1:6) complete all as specified and directed.

Material and labour for Non - skid ceramic coloured floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

Material and labour for Glazed ceramic tiles of size 450x300x7-8mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed.

M&L for 10 mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour for 20mm thick pre-polished cement concrete designed coloured pavement/Chequered tiles having area of each tile not exe16 sqm in size glossy finish as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons paved laid dry or laid dry and pointed etc complete all as specified and directed.

Material and labour for 80 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-40 grade with grey cement and pigment complete all as specified and directed.

All as per item No 41 above but except tiles complete all as specified and directed.

Material and labour for 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 grade with grey cement and pigment complete all as specified and directed.

All as per item 43 above but except tiles complete all as specified and directed.

Material and labour for 16-18mm thick green marble work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.

Material and labour for 16-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, coooking platform and other similar situations

Demolition of cement concrete (unreinforced) of any descriptions, below or above ground floors (floor topping, sub base etc) not exc 150mm thick, above or below ground level complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

Material and labour for 100mm thick plain cement concrete (1:2:4) ,type B- 2 (using 40mm graded stone aggregate) as in floor, hard standing and like complete all as speficied and directed.

Material and labour for 75mm thick PCC (1:3:6), type C2, (using 40mm graded stone aggregate) as in plinth protection / paving, surfae finished even & smooth without using extra cement as complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

M&L for suspended false ceilling system using metalic exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39 mm x 24mm x 0.80mm thick ( thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) cross Tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thickness comprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) with and including 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid ( placed in the grid system duly suspended with 4 mm dia G I bars hangers fixed with steel dash through fasteners from purlins of the roof with necessary fittings and fixtures etc complete all as specified and directed.

M&L for 10 mm thick gypsum board false ceiling joint less work including application of putty over gypsum board to achieve smooth and joint less celing surface and applying two coats of oil bound distemper in ceiling surfaces including framed work for consisting of 60 mm wide GI steel 'C' section of as in main of 0.71mm thick and 60 mm GI channel section as in cross member of 0.63 mm thick and GI steel angle section as in suspenders of size 25x20x0.63 mm and wire cloth of 0.71 mm dia of wire and 100x50mm aperature size including cutting , riveting, steel fastener, drilling holes in RCC roof and securing with screws etc complete all as specified and directed.

M&L for POP cornice width n.exc 200mm wide in ceiling edge of any design and shape ,complete all as specified and directed .

S&F in repair 6 mm thick gypsum board/calcium silicate board tiles of size 600x600 mm including proper hanging arangement as required complete all as specified and directed.

S&F in repair solid PVC wall lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC fillets of width 35mm with interval of 500mm in both horizonatal and vertical directions including necessary caping/beading/fillets at top and junctions or any other locations required as per site etc complete all as per specified and directed.

S&F in repair PVC caping/fillets at top and junctions required as per site condition PVC panelling etc complete all as per specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each and removing from site complete all as specified and directed.

All as per item No 59 here in before but exc 1.5 sqm but not exc 4 Sqm each and removing from site complete all as specified and directed .

Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each complete all as specified and directed .

All as per item No 61 here in before but exc 2 Sqm each.

Taking down of shutter n.exc 1 sqm each and refixing of shutters of any discription in the same opening after easing and adjusting complete all as specified and directed.

Taking down of shutter area exc 1 Sqm but n exc 2 sqm each and refixing of shutters of any discription in the same opening after easing and adjusting complete all as specified and directed.

Supply & fix for 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred put together with Glue, pinned at joints complete all as specified and directed.

Supply and fixing for mild steel flat iron of size 25x3 mm or equivalent as required for hold fasts and clamps & similar small articles confirming to Fe-410-O or Fe-310-O (upto 12 storied bldg) complete all as specified and directed .

Supply & fix for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F for 35mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze ect (wihout sash bars), edge of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass etc sizes of memebers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed .

S&F for solid PVC moulded door frame of size 50mm x 47mm made out of 5mm moulded/printed PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing complete all as specified and directed .

S&F for factory made solid panel PVC moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face supply and fixing in frame complete all as specified and directed.

Supply and fixing for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match,reinforced with MS Sq tube in opening all as shown on drawing (upto 12 storied bldg) complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing.

Supply and fixing for 75mm size stainless steel butt hinges medium weight, cold rolled complete all as specified and directed.

S&F for stainless steel butt hinges medium weight 100mm long etc complete all as specified and directed.

S&F for 125mm long aluminium anodised extruded handles fabricated type, all as specified and directed.

S&F for aluminum anodised barrel tower bolt of extruded section 150 mm size.

S&F for aluminium anodized barrel tower bolts, extruded section 200mm long.

S&F for aluminium sliding door bolt 300mm long, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate.

Supply & fixing for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples all as specified and directed .

Supply & fixing in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm all as specified and directed.

Hacking out old broken glass of any thickness, sizes quality on description from metal frames including punching or drilling out old glazing pins/spring clips.

Supply and fix for 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as specified and directed.

Supply & fix for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc. 0.5 Sqm in each pane complete all as specified and directed.

Supply and fix for 4mm thick frosted glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as specified and directed.

S&F for powder coated aluminium door shutter fixed including roller machine with rubber gasket, stopper, cleats, handles etc complete including aluminium door styles of size 80 mm x 38 mm x 2.00 mm and aluminium door section of top, bottom and lock rail shutter frame of 80 mm x 38mm x 2.00 mm including taking down old door with necessary all fitting complete all as specified and directed.

S&F for Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm and shutter of section 20mm X20mm X1.55mm incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions and all as specified and directed.

S&F in repair power coated aluminium Partition wall of frame size 80mm x 38mm x 2.00 mm with standard beads/glazing clips, locking arrangement etc with necessary all fittings complete all as per manufacturer's instructions and all as specified and directed.

S&F for 4.8 mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area of glass not exc 0.5 sqm each pane.

M&L for 9 mm thick prelaminated partilce boards interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame for pelmet boxes,aluminium door and aluminium partitions complete all as specified and directed.

Supply and fixing as in repair drapery rod made of electric resistance welded MS pipe of 21 mm dia having a coating of corrugated virgin PVC extrusion and cover with ABS plastic incuding brackets and knobs etc complete all as specified and directed.

Supply and fixing as in repair for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified anf directed.

All as per item No 91 here-in-before but without glazing bars.

Taking down 15 mm dia old steel water tubing and connections in any position complete .

Taking down 20 mm dia old steel water tubing and connections in any position complete .

Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Supplying and laying for 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Cutting grooves/chases in cement concrete or brick wall / floor for taking down of GI pipe line and making good the disturbed surfaces to match with existing specification complete all as specified and directed.

Supply and fixing in repair vitreous China (white) wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts including PVC seat cover and making all necessary connections complete all as specified and directed.

S&F in repair vitreous chaina squating pan orissa pattern size 580X 440mm white with intregal foot rest including P or S trap complete including cement concrete (excluding flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete all as specified and directed.

S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and directed.

S&F in repairs Vitreous China wash basin ( white), flat back, size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed.

S&F in repairs Vitreous China wash basin (coloured), Pedestral pattern, bowl size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed .

S&F in repairs Vitreous China wash basin (coloured), oval size for counter top, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed .

S&F in repair 15mm bore brass CP bib cock fancy type long body with crutch or butterfly handle complete all as specified and directed.

S&F in repair 15mm bore brass CP stopcock concealed type fancy type,with crutch or butterfly handle complete all as specified and directed.

S&F in repair 15mm bore brass CP angular stopcock type with crutch or butterfly handle complete all as specified and directed .

S&F in repair PVC connection 15 mm size pipe with PTMT nut of length 600mm complete all as specified and directed.

S&F in repair brass CP shower roses with or without swivel joints,with shower arm, 125mm size, including fixing to steel pipes or union complete all as specified and directed.

S&F in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long `D' type complete with brass chromium plated screw complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair brass CP toilet paper holder to wall with chromium plated brass screws complete all as specified and directed.

S&F in repair brass CP health fucet with chromium plated brass screws etc complete all as specified and directed.

M&L for preparation of newly plaster surfaces of wall and applying two coats of oil bound distemper etc complete all as specified and directed.

M&L for complete removal of existing treatment of wall surfaces and applying multi colour texture with plastic paint to match existing design and pattern as approved by GE (upto 12 storied of bldg) complete all as specified and directed.

M&L for one coat of plastic paint over old texture sruface to match existing design and pattern as approved by GE (upto 12 storied of bldg) complete all as specified and directed.

M&L for preparation of old treated/decorative surfaces of wall by washing, rubbing down and stopping old distempered and painted surface and applying one coat of oil bound distemper etc all as specificed and directed.

M&L for preparation of newly plaster surfaces of ceiling surface and applying three coats of white wash on walls complete all as specified and directed.

M&L for preparation of old surfaces of ceiling and applying one coats of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of newly plaster surfaces of wall and applying two coats of exterior acrylic emulsion paint on external surface including nescessary scafolding complete all as specified and directed.

Material and labour for preparation on new plastered surfaces of wall and applying two coats of cement base paint (upto ten storey bldg) complete all as specified and directed

M&L for preparation of old surfaces of wall and applying one coat exterior acrylic emulsion paint on external surface including nescessary scafolding complete all as specified and directed.

S & F for 2mm thick wall care putty on wall/ceiling complete all as specified and directed .

M&L for preparation of old treated/decorative surfaces of wall by washing, rubbing down and stopping old painted surface and applying one coat of cement base paint etc complete all as specificed and directed.

M & L for two coats of synthetic enamel painting to wooden surfaces (frame & shutter) over a coat of primer including preparation of wooden surface of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for two coats of synthetic enamel painting to steel surfaces (frame & shutter) over a coat of red oxide primer including preparation of steel surface of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed.

M&L for preparation of old painted surfaces of steel & iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint etc all as specified and directed.

M&L for french polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats all as specified and directed .

Supplying and fixing in repair 1.25mm thick steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.

Oiling/greasing existing rolling shutters for easing adjusting for smooth functioning of steel rolling shutter complete all as specified and directed.

S&F for lock plate bracket made of angle 40X40X5 mm, flat 25X6 mm, cleat, latice flat & locking arrangement etc of rolling shuttes including necessary welding / riveting and one coat of red oxide primer including taking down old lock plate complete all as specified and directed.

S&F for mild steel slot profiles of 1mm thick including taking down old profiles complete all as specified and directed.

Supplying and fixing in repair collapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brasshandles etc., as specified, erected in position and securing runners with holdfasts and brackets, etc complete all as specified and directed.

AZIM ENTERPRISES

BHASKAR SUPPLY AGENCY

ROY CONSTRUCTION

ESS PEE UDYOG

R T BUILDERS

DK Contractor

DIPAK ENTERPRISE

SENCO