SPECIAL REPAIR TO OMQs AT AIR FORCE STATION YELAHANKA

Amount

M & L for reinforced cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregates) as in shelves complete, all as specified and directed.

Supply only integral water proofing compound, all as specified and directed. ( NOTE : Make- Conplast x 421 IC of M/s Foroc Chemical (Inida) Ltd or its equivalent of make Dr Fixit/ STP Ltd)

M&L for brick work with sub class 'B' bricks having crushing strengh not less than 75 Kg/Sqm , straight or curved on plan exceeding 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks having crushing strengh not less than 75 Kg/Sqm, straight or curved on plan to any radius built in CM 1:4 in half brick thick complete all as specified and directed.

Cutting holes in brick walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0 ) using 12.5 mm graded aggregate ¸depth of embedded portion of hold fast not exceeding half brick, complete all as specified and directed.

S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing edges will be painted to match with prelam sheet all as specified and directed.

M&L Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed.

S& F flush door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed.

S& F fly proof door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed.

S&F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete as specified and directed.

S&F 35mm thick 2 nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers.edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats, complete all as specified and directed.

M & L in reapirs for 18mm thick(minimum) block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both face fixed all all as specified and directed.

M&L for 20 mm thick plastic kitchen cabinet/cub board shutter with all accessories (SS Handle, SS self closing cabinet hinges 2 hole, Magnet catcher telescopic channel etc complete all as specified and directed by Engr-in-charge. Make: Sintex/Balabharathi PVC interiors / Adarva PVC interiors.

S&F powder coated anodised aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including joing cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed.

S&F Continuous (piano) hinges, brass, bright finish of electrogalvanised 40 mm width of flap, all as specified and directed.

M&L Cover fillets of standard 6 mm thick ness hard board, 40mm wide, and fixing with screws, all as specified and directed.

S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats and locking arrangement , glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings, complete all as specified and directed.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extracted section and fixing bolt and sliding bolts of extracted section, all as specified and directed.

S&F for aluminium anodised, barrel tower bolt 150mm of extruded section, all as specified and directed.

S&F for aluminium handle 150mm cast type anodised, all as specified and directed.

S&F Brass 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete, all as specified and directed.

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 all as specified and directed.

Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, 150 mm size of cover plate, all as specified and directed.

S&F for aluminium powder coated drapery rod 32mm dia fixed with suitable bracket complete, all as specified and directed. .(Note: Bracket will be measured and paid separately).

S&F aluminium powder coated fancy type suitabe brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks of 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necesary drilling & finished with polishing, all as specified and directed. (NOTE - Each opening shall have two fillets at both ends)

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

M&L TMT bars 6 to 8mm dia cut to length bent to shape required including crancking spirally for hooking ends and binding with and including MS wire annealed n.less than 0.9mm dia complete all as specified.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, all as specified and directed

Supply and fixing stainless steel (Grade 304) frame work for railing as requered size in horizantal/verticle members of stainless steel pipe, including dismantling the existing MS hand rail as in staircase and balcony complete all as specified and as directed.

M&L 10mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement, complete all as specified and directed.

M&L 15mm thick cement plaster in CM 1:4 on other than fair faces of brick work, finished even & smooth without using extra cement, complete all as specified and directed.

M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble stone masonry all as specified and directed.

M&L Vitrified ceramic light shade tiles, double charged of 10mm thick and area of each tiles not exceeding 0.36 Sqm for flooring over 15 mm thick screed bed in CM 1:6 all as specified and directed.

M&L Vitrified ceramic light shade tiles double charged of 10mm thick and area of each tiles not exceeding 0.36 Sqm as in skirting over 10 mm thick rendering in CM 1:4 dado/skirting including taking down old plaster surfaces finished all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of ech tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screedd bed 15 mm thick in CM (1:6) complete all as directed and specified.

M&L Glazed coloued Ceramic concept tiles of size 350X250X7mm/450X350X7mm thick set and jointed in neat cement slurry including matching PVC corner beading and pointed in white or colour cement to match as in skirting/dado over 10 mm thick rendering in CM 1:4 finished all as specified and directed

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles exc 0.11 sqm but not exceeding 0.18 Sqm as in flooring over 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs pillar window cill, coocking plot forms and including 20mm thick screed bed in cement mortar (1:4) including pointing in white cement ( tiles 20mm thick machine cut, bedded and ;jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, all as specified and directed. NOTE- (i) morble dust shall be used with admiture of pigment to match including rounding and polishing to edges of granite slab.

Supply and fix polished Sadarahalli granite slab flooring 20-22 mm thick with grey cement slurry mixed with pigment to match the shade of the slab laid over 20mm thick screed bed in cement mortar 1:4 complete on staicase including rounding and polishing to edges of granite slab, complete all as specified and as directed. (NOTE - Single piece granite slab shall be provede upto lengh/width of 1200mm)

Supply and fix 20-22mm thick polished sadarahalli granite tiles as in riser and dado of stepslaid over 10mm thick cement mortar 1:4 complete all as specified and as directed. (NOTE - Single piece granite slab shall be provede upto lengh/height of 1200mm)

Roughening surface of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg of cement per sqm, all as specified and directed.

M&L 75 mm thick cement concrete type B-2,1:2:4 (40 mm graded aggregate) for plinth protection finished fair & even, all as specified and directed.

M&L 40mm thick cement concrete 1:2:4 ( type B-1) using 20mm graded stone aggregate with over cement slury 3 kg of cement per sqm finished even and smooth without using extra cement complete all as specified and directed.

Providing and cleaning the roof surface and laying / fixing 2 mm thick TPO (Thermoplastic Polyolepin) waterproofing membrane on prepared of roof & upto to 300 mm of parapets and crumple joint including junction of roof and parapet applied as per technical guidelines and manufacturers instructions laid by authorized trained/skilled applicator complete all as specified and as directed by Engr-in-Charge. (Make 200 GSM GEO textile or Ssian Paints TPO or SIKA or Pidilite Dr Fixit TPO membrane)

M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’thickness of slab 100mm & below, all as specified and directed.

S&F 20 mm dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified & directed.

S&F CPVC pipes 25 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling or laying in floor including fitting in floors all as specified and as directed.

S&F in repair gun metal globe or gate valve 20 mm bore with iron wheel head, screwd both ends, complete all as specified & directed.

S&F in repair gun metal globe or gate valve 25 mm bore with iron wheel head, screwd both ends, complete all as specified & directed.

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete complete all as specified & directed.

S&F in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe fixed in repair all as specified and as directed.

S&F in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm including CP waste coupling & brackets and fixing all as specified and as directed

S & F in repairs Vitreous China wash down water closet pan One Piece EWC size 360 x 725 x 735 mm (pedestal sigle pattern), with smooth action plastic seat cover including valveless symphonic action type low level PVC flushing cistern 10 ltr capacityand incudingl traps which are suitable complete all as specified and directed.

S&F in repairs Ceramic plain full pedastal wall hung type wash basin white/colour size 560 x 470 x190 mm and incl CP waste coupling braches all as specified and directed .

Supply and fixing Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” with long screwed shanks fly nuts ,screwed for iron pipe and fixed completed all as specified

S&F in repair Bib taps chromium plated 15 mm, fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified & directed.

S&F in repair 15mm dia, stop valve concealed type chromium plate fancy type with long shank and cup complete all as specified.

S&F in repair Brass CP wall Mixer and centre hole Mixer for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified and directed.

S&F 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut complete all as specified and directed.

S&F in repair, 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm incl sink coupling all as specified and directed.

S&F sink cock fancy type complete all as specified and (table mounted) with 215 mm swivel spout complete all as specified and as directed.

S&F Towel Rack with lower hanger (stainless steel), fixed with screws , complete all as specified and directed.

Supply and fixed PVC Cabinet mirror of size 600 x 450 x125 mm all as specified & directed .

S& F in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directed at site.

S & F in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange as specified and as directed.

S&F in repairs PVC connection 15mm size with PTMT and of length 600mm, complete all as specified and as directed .

S&F of 32/40mm waste pipe for wash hand basin and sink all as specified and as directed

S&F in repair CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed in repairs. Make : (AKP-CHR- 35711PS of make "JAQUAR" or Equvalent).

S&F corner glass shelf 150mm X 150mm with assy of CP and fixed with Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.

S&F Liquid soap container of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats, as specified and as directed. (Min wt 105 gm). (Model No - CAN-CHR-1137N of make "JAQUAR" or Equvalent).

S&F Corner glass shelf large, 300x300mm with assy of CP and fixed with Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.

S&F glass shelf of size 12 cm wide x 60cm long for wash hand basin with assy of CP and fixed with Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.

S&F CP Towel ring Chromium plated fixed with brass screws and wooden/plastic cleats, as specified and as directed. (Model No - ACN-CHR- 1121BN of make "JAQUAR" or Equvalent).

S&F Stainless steel Soap dish fix to wall all as directed and specified. (Model No - ACN-CHR- 1131N of make "JAQUAR" or Equvalent).

S&F in repair brass CP Health faucet with 1.20m long flexible pipe and wall hook complete all as specified and directed. (Model No - ALD-CHR- 587 of make "JAQUAR" or Equvalent).

S&F Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr fixed in position, all as specified & directed.

Supply and Fixing Stainless steel Toilet paper holder, complete all as specified and directed. (Model No - AKP 35753P of Jaguar or equivalent)

S&F in repair Brass chromium plated bottle traps 32 mm for wash basins and urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed, complete all as specified and directed.

S&F PVC floor trap 75mm dia, including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F 110 mm dia PVC(SWR) Pipes single soketed, in any length with rubber ring joints, laid in trenches or in floors and walls including taking down old pipes, complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia in any radius with access door complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm single socketedwith in any length with rubber ring joints, laid in trenches or in floors and walls including taking down old pipes complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia in any radius with access door, complete all as specified and directed.

S&F PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door, complete all as specified and directed.

S&F CP grating size 100mm fixed with white cement, complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tank 1000 ltr capacity incl threaded type cover hoisted and fixed in position including dismantling old tank, complete all as specified and directed.

S&F in repair 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed.

S&F in repair PTMT Nipple 25 mm suitable for HDPE water tank. (Minimum weight 25mm- 65gms) , complete all as specified and directed.

S&F in repair PTMT Nipple 20 mm suitable for HDPE water tank. (Minimum weight 20mm- 45gms ), complete all as specified and directed.

M& L for new wall surface applying waterproof cement based putty @ 300 Gm (undiluted) per Sqm of average thickness 1 mm over the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust and applying two coats of interior acrylic emulsion paint over one coat of interior wall primer using airless spary technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray macine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. by skilled labour as per following steps :- (a) Mix the putty powder by adding water as per manufacturer instructions and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute. (b) Apply the first coat the prepared mixer with the help of fully automatic airless spary machine of putty aplication having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (c ) Allow 6-8 hrs time to dry the putty surface.

Complete removal of existing treatment by scrapping with machanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make the surface free from dust ,loose paint etc by skilled labour and applying waterproof cement based putty @ 300 Gm (undiluted) per Sqm of average thickness 1 mm over the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust and applying two coats of Oil bound emulsion distember over one coat of interior wall primer using airless spary technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray macine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying oil emulsion should be able to spray in hard to reach area and penetration of oil emulsion on the surface etc. by skilled labour as per following steps:- (a) Mix the putty powder by adding water as per manufacturer instructions and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute. (b) Apply the first coat the prepared mixer with the help of fully automatic airless spary machine of putty aplication having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (c ) Allow 6-8 hrs time to dry the putty surface.

M& L for new wall surface applying two coats of all weather exterior acrylic emulsion paint over one coat of exterior wall primer using airless spary technology with max working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray macine should be r with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. byskilled labour as per manufacturer instructions complete all as spd and directed:-

Complete removal of existing treatment by scrapping with machanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make the surface free from dust ,loose paint etc by skilled labour and applying water proof cement based putty @ 300 Gm (undiluted) per Sqm of average thickness 1 mm over the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust and applying two coats of interior acrylic emulsion paint over one coat of interior wall primer using airless spary technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray macine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. byskilled labour as per following steps on wall surfaces :- (a) Mix the putty powder by adding water as per manufacturer instructions and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute. (b) Apply the first coat the prepared mixer with the help of fully automatic airless spary machine of putty aplication having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (c ) Allow 6-8 hrs time to dry the putty surface.

All as item No 91 Above but on ceiling.

M&L preparation of old decorated wall surface and applying two coat of White wash all as specified and directed.

M&L preparation of old decorated ceiling surface and applying one coat of white wash, all as specified and directed

Complete removal of existing treatment by scrapping with machanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make the surface free from dust ,loose paint etc by skilled labour and applying two coats of exterior acrylic emulsion paint (Apex) over one coat of exterior wall primer using airless spary technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray macine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. byskilled labour as per manufacturer instructions complete all asspecified and directed.

M&L for Writing letters or figures (Block, Roman, italic or Indian) not exceeding 30 cms height with synthetic paint etc. all as specified and directed.

M&L for Writing stops, commas, short lines dashes, hyphens, brackets, etc with synthetic paint all as specified and directed.

M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L Preparing new steel surfaces of any description and applying two coat of Synthetic enamel Paint over one coat of primer to steel surface all as specified and directed.

M&L Preparing old painted wooden surface and applying one coat of Synthetic enamel Painting, all as specified and directed.

M&L Preparing old painted steel surface and applying one coat of Synthetic ename paint, all as specified and directed.

S&F Stainless Steel Basket 48 cm x 50 cm x 10 cm

S&F Stainless Steel Basket 48 cm x 50 cm x 15 cm

S&F Stainless Steel Basket 48 cm x 50 cm x 20cm

M&L for stainless steel self closing hinges, size 100mm fixed to kitchen cabinet door & cub board shutter, all as specified and directed.

M&L for stainless steel handle 100mm size fixed to kitchen cabinet door, all as specified and directed.

M&L for stainless steel handle 125mm size fixed to cub board shutter, all as specified and directed.

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square not exceeding 0.50 Sqm in each pane fixed with aluminium window and ventilator all as specified and directed.

S&F figured glass pin head type 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane fixed with aluminium window and ventilator all as specified and directed.

S&F sheet glass ordinary quality 4mm thick as in doors,window, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprime gasket all as directed.

M & L point wiring for one light point complete with PVC insulated cable, unsheathed of size 1.5 Sqmm (nominal cross sectional area) copper conductor multistranded single core FRLS 1100 volts grade heavy duty ISI marked all as per IS-694 marked with valid CM/L number drawn through / in rigid PVC conduit dia 20mm duly concealed in exisiting brick / stone masonary wall and provision of PVC inslated cable 1.5 sqmm with specificaitons mentioned here-in above for earth continuity conductor connected to common earth dolly including GI box suitable for modular switches / Sockets with inner sheet, frame duly fixed with all accessories (of same make) complete all as specified and directed by engr-in-Charge. Note: (a): GI sunken boxed with inner sheet and frame suitable for modular type switches/sockets will be measured and paid separately.

All as item No.116 above but for one ceiling fan / exhaust fan controlled by one switch.

All as item No.116 above but for One 5A 2pin/3pin switch socket out let multipurpose on independent Board

All as item No.116 above but for One socket 5 Amps on same board with other switches

All as item No.116 above but for One call bell point controlled by one bell push

All as item No.116 above but wiring with 2.5 sqmm for 5 pin 15 amps socket outlet multipurpose on independent board.

All as item No.116 above but wiring with 4 sqmm for 20 amps metal clad socket multipurpose on independent board.

S & F in repair Modular Switch 1 way 6 Amps 1 Module, all as specified and directed.

S & F in repair Modular Socket,6 Amps- 2/3 pin combined 2 Modul, all as specified and directed.

S & F in repair Modular Switch 1 way 16 Amps 1 Modul, all as specified and directed.

S & F in repair Modular Socket,6 A/16A,2 Modul, all as specified and directed.

S & F in repair Modular bell push 6A,1 Modul, all as specified and directed.

S & F in repair Modular type Fan step regulator 120W type 2 modul, all as specified and directed.

S & F in repair PVC ceiling rose two to three terminals all as specified and directed.

S & F in repair ding dong bell AC, 230 volts, single pole complete, all as specified and directed.

Supply and Fixing in repairs LED Tube light fitting 1 x20 Watt, 4 feet, 220V housing with PC diffuser box type with driver,holder including LED tube light connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal all as specified and as directed.

Supply and fixing in repair LED light fitting 10 Watt surfce type 2 feet complete with drivers ,holders LED lamps including connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal Complete all as specified and as directed.

Supply and Fixing in repairs MCB DB SPN 12 way, Double door, 240 V, AC, 50 Hz, with 200Amp rated bus bar, all as specified and as directed.

Supply and fixing in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, all as specified and as directed.

Supply and fixing in repair, 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and neutral current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning, all as specified and as directed

Material and Labour for sub main wiring 1100 volts grade PVC insulated cable FRLS multistranded copper conductors, two runs of single core 4 Sqmm along with one run 4 Sqmm PVC insulated single core FRLS multistranded copper conductor cable as earth continuity conductor along with one run of PVC medium grade conduit all as specified and as directed Note: Three runs of 4 Sqmm cable with one run of PVC conduit will be measured as one unit length.

M /L Painting of ceiling fans any size, with one coat of synthetic enamel paint by spraying including filling cavities with filler, writing MES No including taking down and refixing, all as specified and as directed (NOTE - Any addition/alteration to connecting cable shall be included in quoted rate)

M /L Painting of exhaust fans 300mm sweep, with one coat of synthetic enamel paint by spraying including filling cavities with filler, writing MES No including taking down and refixing, all as specified and as directed (NOTE - Any addition/alteration to connecting cable shall be included in quoted rate)

Supply and fixing in repairs LED building security light fitting 35 Watt, 230 Volts AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 66 protection complete, all as specified and as directed

Taking down existing KWH meter carefully by disconnecting incoming and out going connection and kept aside including recordrd the SL No ,Qtr No and meter reading ,and reconnecting the same after completion the work, all as specified and as directed

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth, all as specified and as directed

Supply and Fixing Metal clad switch socket Single pole and neutral enclosure with a two pin and earth plug and socket complete with One single pole MCB SP 20 Amps and fixed in walls complete all as specified and as directed.

S & F in repairs LED light fitting 1x 9/1x10 Watt bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, all as specified and as directed

Supply and fixing in repairs LED light fitting mirror type with high out put diffuser 2 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete, all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, all as specified and as directed

Making suitable size Core cutting on stone/Bricks wall for fixing of exhaust fan 300 mm sweep and making good to the distrubed surface, all as specified and as directed

Supply and fixing white cover plate with frame 1 module, all as specified and as directed

Supply and fixing white cover plate with frame 2 module, all as specified and as directed

Supply and fixing white cover plate with frame 3 module, all as specified and as directed

Supply and fixing white cover plate with frame 4 module, all as specified and as directed

Supply and fixing white cover plate with frame 6 module, all as specified and as directed

Supply and fixing white cover plate with frame 8 module, all as specified and as directed

Suplly and fix modular metal flush box 1/2 module, all as specified and as directed

Suplly and fix modular metal flush box 3 module, all as specified and as directed

Suplly and fix modular metal flush box 4 module, all as specified and as directed

Suplly and fix modular metal flush box 6/8 module, all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of Stone slabs and stone tiles of any description or thickness in floors, aprons etc laid dry and pointed all as specified.

Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level), all as specified and as directed

Demolition of brick work or stone masonry built in CM including all quions all as specified & directed.

Demolition of Reinforced cement concrete in ground floor and pavings in any description and in any position.

Demolition of Mud in roofs , any thickness , including plastering and leeping (whether full thickness removed or only a part thereof and removing old existing unserviceable tar felt or any type of felt & removing the debris to a distance exc 250m and n.exc 500m, etc complete all as specified & directed

Taking up or down steel tubing including fittings for 15 mm bore pipe in any position (wall/ceiling/floor etc) complete, all as specified and directed.

Taking up or down steel tubing including fittings for 20 mm bore in any position(wall/ceiling/floor etc) complete, all as specified and directed.

Taking up or down steel tubing including fittings for 25 mm bore pipe in any position (wall/ceiling/floor etc) complete, all as specified and directed.

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames) complete, all as specified and directed.

Taking down Chowkhat or frames exceeding 1.5 Sqm and not exceeding 4.0 Sqm each with shutters(Without taking off shutters from the frames) complete, all as specified and directed.

Taking down shuttes of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm, all as specified and directed.

Taking down shuttes of any description exceeding 2.00 Sqm each and refixing in the same opening all as specified and directed.

Taking down cement plaster on walls any description including raking out joints, hacking for key and scrubbing down with water etc, complete, all as specified and directed.

Taking down unserviceable wire carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified.

Taking down carefully Unserviceable Sub main wiring of any size and type batten or conduit, surface or concelaed including removing material from site and making good the disturbed surfaces of walls, roofs etc to match the existing Complete all as specified and as directed.

M/s Sri Chakrapani Constructions

Lakkaiah Rangaswamy