Construction of Gram Panchayat Building C.S.C.Centre at Dhanora BU Tq. Ambajogai Dist.Beed.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Manual Means Bd.A.1 Page No. 259 Cubic (E-SRI.No.21.01Page No.153)

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift) upto 1.50 m) By Manual Means Bd.A.2 Page No.259 Cubic (EDSR I.No.21.05Page No.153)

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. As directed by Engineer in charge. Cubic(E-DSRI.No.21.40P 157)

Providing and laying in situ, cement concrete in M10 of trap/ granite/ quartzite/gneiss metal for foundation and bedding including bailing out water, formwork, compacting and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer, With natural sand. No. 287(SSRI.No.24.01P175)

Filling in plinth and floors with contractors material/brought from outside approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Bd.A.11 Page No. 263 (DSRi. No.21.36P.No194) (A) With availble

Filling in plinth and floors with contractors material/brought from outside approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Bd.A.11 Page No. 263 (DSRi. No.21.36P.No194) (B) with contractors materials

Providing and laying in situ cement concrete M20 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. etc. complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. With natural sand. Bd.F.3 Page No. 98 and B.7, (SSRI.No.25.11P.178)

Providing and casting in situ cement concrete M20 of trap / granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Natural sand. Bd.F.5 Page No. 300 and B.7, (SSRI.No.25.31 P179)

Providing & casting in situ cement concrete M20 of trap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing etc. complete. (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Bd.F.6 Page No. 300 and B.7, Page No.38 (SSRI.No.25.50P181)

Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap/ granite/quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting curing finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.9 Page No. 303 and B.7, Page No.38(E DSR I.No.26.05P184)

Providing and casting in situ cement concrete M20 of trap/ granite / quartzite/gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Bd.F.8 Page No. 302 and B.7, (SSRIO.No.25.70P 182)

Providing and fixing in position TMT FE 500bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. a) For TMT Fe 415 steel bars (If Mild Steel/HYSD steel is to be used prior permission from S.E. should be taken) Bd.F.17, Page No. 306 (E-DSRI.No.26.33P.233)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete(DSRI.No.27.03P 197)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (DSRI.No.27.05P 197)

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal inforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. Bd.G.7 Page No. 316 (DSRI.No.27.06P197)

Providing and fixing Jungle (hard) woodofapprovedspeciesjoistsandgirdersinti mberfloorofsingle, doubleorframedtypeinclud ingscaffolding if necessary and one primer coat etc. complete. As directed by Engineer in charge.(EDSR INo37.04P233)

Providing and fixing solid core flush door commercial type on single leaf 16 mm thick Bison Panel cement bonded particle Board including Teak wood lipping beading on all four edges without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with painting three coats complete. oil (DSRI.No.39.11P 246)

Providing and fixing in position. (as per I.S.1868/1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.5 * 38.1 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 * 1.2 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 * 31.75 * 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 * 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 * 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 * 18 * 1.25 mm at weight 0.417 kg/Rmt. and top section 40 * 18 * 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge (SSRI.No.39.37P310)

Providing and fixing sheet glass of 24 oz. putty etc. complete (SSRI.No.39.28P 265)

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Bd. U.1 Page No. 537 Square (SSRI.No. 40.01P 193)

Providing and fixing Factory made 31mm ABS Plastic Door made of abs plastic moulded sheet of 1.5 mm thickness P.U. foam insulated of density 40 kg per cubic meter with seasoned wood to fit lock and hardware covered with aluminium 'A' section of 31mm x 27mm x27mm x 1.5mm thick powder coated and fitted with PVC 'L' Corner of dimension 75mm x75mm x 10mm thick on all four sides including all labour, material, stainless steel fixtures and fastening etc complete (SSRI.No.52.51P No.447)

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. Bd.L.1 Page No. 367 Square Metre(E-DSRI.No32.01PNo.154)

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Bd. L.2 Page No. 368 (E-DSR Item No.32.03 Page No. 154)

Providing internal cement plaster 20mm thick in single coat in cement mortar 1:5without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc, complete. Bd. L.2 Page No. 368 Square Metre (E-DSRI.N.32.04P154)

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. (SSRI NO 33.40 P 160)

Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc.complete. Bd.M.13 Page No. 386. Square Metre (SSRI.No.33.25P159)

Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting Bd.M. 12 Page No.385 Metre(SSRI.No.33.41P 233)

Providing and laying telephone black/Amba White / Cadburybrown / Ruby red /Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. (SSRI.No.33.68P 220)

Providing and applying two coats of lead/zinc base oil paint/ bituminous paint of approved colour and shade to new wood work and fiber boards including preparing the surface, knotting, scaffolding if necessary, excluding primer coat etc. complete. Bd.O. 1 Page No. 403 Square Metre (SSRI.No.35.01)

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete (DSRI.No.36.14P 228)

Providing and applying two coats of exterior acraylic emulsion paint confirming corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning preparing the plaster surface, applying primer coat scaffolding if necessary, and watering the surface for two days etc complete (DSRIno.35.25P 225)

Providing and applying whitewash in two coats on old new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing & brooming down etc. complete. Bd. P. I Page No. 411 (E-DSRI.No. 36.03 Page No.227

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BD.V 5 page 551 and as directed by Engineer in charge Running Metre(E-DSRI.No.42.61P 280)

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BD.V 5 page 551 and as directed by Engineer in charge Running Metre(E-DSR.No.42.62P 281)

Providing and fixing 25 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Bd.V.8 Page No. 554 Number (SSRI.No.41.42P 288)

Providing and fixing 15 mm dia. screw down bib/stop tap of brass including necessary socket union nut complete. Bd.V.8 Page No. 554 Number 366 50(SSRI.No.41.40P 288)

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters As directed by engineer-incharge. (SSRI.No.42.53P 280)

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. Bd.V.43, Page No. 574 Numbe (SSRI.No.42.12)

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with ecessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. As directed by Engineer in charge. (SSRI.No.42.52)

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including Por S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. As directed by Engineer in charge. (SSRI.No.42.33P 297)

Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. Bd.V.30 Page No. Number 565 (SSRI.No.41.64P 290)

Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. Bd.V.32 Page No.567 (SSRI.No.41.80 P 292)

Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete. ESSR I.No.6.05P 83

Please Enable Macros to View BoQ information