PROVN OF UTENSIL STAND AND ASSOCIATED WORK AT CERTAIN SMQS OF AF STATION KANPUR

Amount

Demolition of plain cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding removing rubbish off the premises complete all as specified and directed.

M & L for 25 mm thick PCC(1:2:4) type B-0, using 12.5 mm graded stone aggregate as in sub base for floor complete all as specified and directed.

M & L for 7 to 8 mm thick non skid ceramic coloured digital tiles (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed or bedding in CM (1:6) complete all as specified and directed.

Ditto all as per item No 4.00 here-in-before but as in skirting/dado but over and including 10 mm thick cement plaster as backing coat in CM (1:3) complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick cement plaster as backing coat in CM (1:4) complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M & L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window cills cooking platforms and like in CM (1:4) over and including screed peding CM (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting and moulding edges complete all as specified and directed.

Demolition of plain cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L RCC (1:1.5:3) (Nominal Mix) Type A1 using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S & F Mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubbing down with water etc complete all specified and directed.

M&L for rendering 15 mm thick in CM ( 1:6 ) plaster on wall/ concrete surfaces finish even and smooth without using extra cement including two coat of cement base paint over a coat cement primer complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or stone masonary in CM (1:6) finished fair and even without using extra cement and applying two coats of OBD over and including one coat of primer and 2mm thick wall care putty complete all as specified and directed.

M&L for rendering 10 mm thick after dubbing out average 10 mm thick on irregular face of ceiling in CM (1:4) finished even and fair without using extra cement, including chicken wire mesh fixed with nails or screws etc and applying three coats of white wash after preparation of surfaces complete all as specified and directed.

M & L for complete removal of existing treatment of old internal / external wall / ceiling / chajja surfaces by means of scraping machine including filling the cracks, remove the nails, vegetations etc and applying water proof cement based putty @1 Kg (undiluted) per Sqm of average thickness 1 mm of approved make over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all as specified and directed and as per manufacturer's instructions. Putty work will be carried out as per the following steps :- (i) Mix the putty powder by adding 40-50% water and mix it with Trucare Putty mixture with minimum the mixing capacity 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute. (ii) Apply the first coat the parepared mixer with the help of fully automatic airless spray machine of putty application by DC electric motor of 3.3 KW having flow speed of max 6 Ltrs per minute with a maximum pressure 230 bar having maximum tip size 0.041" (iii) Allow 6-8 hrs to dry the putty surface.

M&L for complete removal of existing treatment and preparing OLD plastered or unplastered surface of wall at any position complete all as specified and as directed.

M & L for applying two coats of Oil Bound Distemper over a coat of primer and 2 mm thick wall care putty approved quality complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 sqm each but with shutters (without taking off shutters from the frame), and removing from site complete all as specified and directed.

Ditto all as per item No.20.00 above but exceeding 1.5 sqm but not exceeding 4sqm each.

Providing and fixing factory made uPVC white colour sliding windows, area n exc 2.00 Sqm each three track made of extruded profiles with wall thickness of 2.3 mm (plus or minus 0.2 mm). Window profile with hollow sections with multi chamber, frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm), sliding mesh sash (42 mm x 57 mm), sliding interlock (One vertical length in each shutters) (45m5 mm x 28 mm), glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all fusion welded at all corners, including railing of holes for fixing of hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2 plus or minius mm thick galvanized steel frame (30 mm x 18 mm) 2 Nos, sliding sash (30 mm x 18 mm), sliding mesh sash (26 mm x 10 mm), profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasterners. Hardware : Touch lock of zinc alloyed (white powder coated), steel roller system, stainless wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories) (Note : (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose (ii) Provision for AC opening to be provided in each window. (iii) A fixed glass to be provided in each opening for AC. ).

Ditto all as per above item no 22.00 but area exc. 2 sqm

S&F 5 mm thick ordinary glass n exc 0.5 Sqm in each pane complete all as specified and directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube all as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick( stile), consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, all as specified and as directed.

S&F PVC Butt hinges medium weight, 100 mm long, complete all as specified and directed.

S&F 150 mm size aluminum, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 125 mm long Aluminum anodised bow handle fabricated type extruded section complete all as specified and directed.

S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm for double shutter door comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F 30mm thick Wire Mesh solid WPC Door shutter consisting of density 650Kg/Cum as per manufacturers an ISO-9001-2015 certified company door to be panneled with Statin less steel mosquito wire mesh and XTN alumenium wire mesh for additional strength and safty purpose (conforming to IS-4020. The doors shoul be water proof termite proof, fire retardent and heavy screw holding capacity, door to be fixed to frame with 03 Nos of MS poweder coated but hinges of size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through both the walls of the MS Tube and others hardware should be fixed with 19X6mm steel screws etc complete all as per direction of Engr-in-Charge. Manufacturers specification and drawings complete all as specified and directed.The cost of wire mesh is inclusive of unit quoted rate.

S & F 150 mm long Aluminum anodised bow handle fabricated type extruded section complete all as specified and directed.

S&F for butt hinges medium weight cold rolled mild steel 100 mm long, complete all as specified and directed.

S & F 300 mm long aluminum anodized sliding door bolts with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and directed.

M&L for PCC (1:3:6) type C1 using 20mm graded stone aggregate for hold fasts finished to match with the surrounding surfaces including necessary form work complete all as specified and as directed.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore complete all as specified and directed.

All as per item No 42.00 above but 20mm bore of pipes complete all as specified and directed.

S & F 15 mm bore steel tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.

S & F steel water tubing medium grade, galvanised with all fittings of 20 mm bore and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with CM (1:3), cutting depth not exc 10 cm girth complete all as specified and directed.

S&F in repairs 15 mm bore Bib taps,chromium plated cast copper alloy with fancy type crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S&F in repairs 15 mm bore Stop valves, chromium plated cast copper alloy,with fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all specified and directed.

S&F in repairs 15mm bore fancy type pillar taps, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes and fixed complete all as specified and directed.

S&F in repairs 15mm bore angle/stop valves fancy brass chromium plated, screwed down, high pressure with crutch or butterfly handles screwed both ends for iron pipes complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 125 mm size complete all as specified and directed.

S&F grating doom 125mm dia with waste hole of PTMT. (Mini weight 50 gms) complete all as specified and directed.

S&F PVC waste pipe 32 mm bore for WHB/sink complete all as specified and directed.

S&F in repairs brass chromium plated towel rail of 600 mm long with end bracket both sides complete all as specified and directed

S&F in repairs Soap dish, vitreous china white, approximate size 160x160x90mm all as directed as specified and directed by Engr-in-charge.

S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall as with fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm complete all as specified and as directed.

S&F in repair 32 mm dia low density polyethylene pipes with bends etc as required (LDPE) of pressure rating 6 kg/sqcm, fixed to wall, ceilings or in floors etc complete all as specified and directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repairs PVC flushing cistern push button type of 10 liter capacity , coloured/White complete with all fitting fixed with WC including PVC flush pipes ,brackets etc complete all as specified and directed.

S&F in repair vitreous china wash down water closet pedestal pan white excluding flushing cistern and flush pipes complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white size 550x400 mm including bracket but excluding taps, waste pipes, chain and plug etc complete all as specified an directed.

M&L for cast iron floor trap with grating including jointing to waste pipes in CM PCC (1:2:4) type B-1 using 20 mm graded stone aggregate ,75mm dia outlet complete all as specified and directed .

S&F in repair cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors using sand cast CI pipes 75mm bore pipes etc complete all as specified and directed.

Ditto all as per item No 64.00 here-in-before but for 100 mm bore pipe.

S&F in repair 250mm size mild steel door springs complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparation of new steel and iron surfaces of any description over 10cm in width or girth not otherwise described, and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M&L for Preparation of old decorated surfaces of walls, pillars & cornices including brooming down and cleaning the surfaces & applying one coat of white wash complete all as specified and directed.

Ditto all as per item No 70.00 here-in-before but on ceiling surfaces.

Taking up/down asbestos cement pressure pipes of size 100/75 mm (including all fittings), including disconnecting pipes and fittings complete all as specified and directed.

S&F PVC (SWR) pipe, 110 mm dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Ditto all as per item No 73.00 here-in-before but for 75 mm dia.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

Ditto all as per item No 75.00 here-in-before but for 75 mm dia.

S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), white colour, triple layer construction hoisted & fixed in position, including 20mm dia PTMT ball valve and dismantling of old tank & removing to where directed complete all as specified and as directed.

M & L for chipping of unsound / weak/ loose concrete/cover of reinforcement over RCC member such as roof slabs, chajjas, facia, hand railing, stair, chiseling and disposal of debrish out side the MOD land complete all as specified and directed.

M & L for providing and applying solvent and styrene free, expoxy acrylate based, 2-component anchoring adhesive acording to specification. Non-sag, even over head and should have compressive strength @70 N/Sqmm , modulus of Elasticity in compressive strength @7000 N/Sqmm, tensile strength in flexure @ 29 N/Sqmm, Tensile strenght @15 N/Sqmm, Modulus of Elasticity in Tension 3800 N/Sqmm as per direction of Engineer-in-Charge for satisfaction of GE. The manufacturer shall be an ISO 9001 & 14001 certified and shall be applied by authorised applicator conforming to manufacturer's specification and instructions. (Note :- The contractor shall submit a certificate in this regard from the manufacturer/Make before starting the work at site).

M&L for providing and applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with one part of solution as approved by GE in writting (as per manufacturers instruction) with 4 part of water and 6 part of cement by weight. Coverage area of solution shall not be more than 0.25 Kg/Sqm for one coat. The manufacturer shall be an ISO 9001 & 14001 certified and shall be applied by authorised applicator conforming to manufacturer's specification and instructions. The contractor shall submit a certificate in this regard from the manufacturer/Make.

S&F in repairs stainless steel kitchen plate rack standard size (24x36x10) inch of weight 11.00 to 11.50 Kg of make specified in PS complete all as specified and directed.

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Peris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.

M & L for concealed point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.5 mm with earth dolly suitable for mounting switches, sockets, fan regulators, including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following :- For one light, fan, exhaust fan call bell.

-Ditto- all as per item No 83 here-in-before but For one socket point controlled by one switch on independent board.

-Ditto- all as per item No 83 here-in-before but For one socket point controlled by one switch on same board.

-Ditto- all as per item No 83 here-in-before but For light point controlled by two switch

-Ditto- all as per item No 83 here-in-before but For one bell point

All as per item No 83 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

M & L, piano switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified.

M & L, piano switch flush type 15 Amps, 240 Volts single pole white finish complete all as specified.

M&L, socket outlet 3 pin, 5 Amps flush type white finish complete all as specified.

S&F, socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified.

S&F, bell push, flush type universal, 240 V white finish complete all as specified.

S&F, 2 way switch complete all as specified

S&F in replacement electric bell ding dong type complete all as specified and directed

S&F ceiling rose, surface backlite, 65 x 20 mm three terminal complete all as specified and directed

S&F regulator rotary, 5 speed step type regulator,2 module 120-230 V white finish complete all as specified and directed

S&F, in replacement, double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

Supply & fixing, testing and commissioning in replacement of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs fixed in repairs complete all as specified & directed.

-Ditto- all as per item No 99 but of SPN 40 Amps.

S&F in replacement sheet metal enclosure , 20A single pole and neutral with a two pin and earth plug and socket complete in metal clad board fixed properly on in concealed position all as directed by Engineer-in-Charge.

Supply and fixing in reploacement exhaust fan of 300mm sweep including making necessary electrical connection complete all as specified and as directed. Note : Old exhaust fan will be deposited to MES store yard

Supply and fixing ventilating fan of 250 mm sweep including making necessary electrical connection complete all as specified and as directed.

Supply and fix ceiling fan in replacement, 1200 mm sweep, rated input power of 30-35 watt, 350 RPM, air delivery of 225 CMM, rated voltage of 220-240 V, 50 Hz. Complete with down rod and necessary wiring connection from ceiling rose, all as sepcified and directed by engineer in charge. Note : Old fans shall be deposited to MES store

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 2.5 sqmm drawn in new PVC conduit with 2.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length.

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 4 sqmm drawn in new PVC conduit with 4 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length.

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in PVC conduit with 6 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. item.

M&L for XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade 25 sqmm 4 core laid in trenches/panel or passing through pipe including connecting with suitable lugs, nuts and bolts and testing complete all as specified and directed

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out as in soft/loose soil complete all as specified and as directed.

Returning , filling in including spreading , levelling watering and well ramming in layers not exceeding 25 cm as in soft/loose soil complete all as speciied and as directed.

Removing excavated material (soil) n exc. 50m and depositing where direc ted at a level n exc. 1.5 m above the starting point complete all as specified and as directed

Supply and filling fine sand ( or stone dust ) to the full width of trenches for protection of cables including spreading and punning down complete of all as specified. Note : Thickness of sand/stone dust shall be paid after cushioning after punning

M&L laying well burnt old size bricks, sub class "B" bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection complete all as specified & directed by Engr-in-Charge.

Supply and fixing of GI pipe light grade of size 40 mm bore for laying in trenches/floors for protection of LT cable, complete all as specified and directed.

M & L energy saving LED 4ft Batten 20 Watt with a nominal system lumen output of 2500 lumens and a minimum system efficacy of 110 lm/W with fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting and removing UNSV . The luminaire shall have a rate system lifetime of 40,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>80. The luminaire shall meet IP 20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of Extruded aluminium batten with a PC glossy diffuser.

S&F Endural LED bulk head fitting Plastic Body, heat resistant, with specially designed gasket incuding making all necessary fixing arrangement and electrical connection all as per directed by Engr- in - charge.

Supply & fixing decorative wall mounted brushed nickle finish fixture with opal glass diffuser suitable for wall mounting with B22 base including LED Bulb 8/9 watt LED Bulb, complete including fixing arrangements and making electrical connection complete and taking down old fittings of any type complete all as specified and directed.

Supply & fixing LED bulb 9 W complete all as specified

M&L in replacement for LED Building Security Light 70 watt of aluminium PDC housing glass cover with IP 66 protection, along with GI bracket of 0.90 RM of suitable size, complete all as specified and directed

M & L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth strip of 4 mm (up to 7.5m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shwon in electrical plate no 5 of SSR part 1 including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS bar 8mm dia 150mm c/c reingorcement, watering funnel 15mm dia light grade for protection of earth electrode 20mm dia for watering all as speicified and directed and tested on completion.

Material and Labour for 3 core PVC insulated sheathed PVC stranded copper conductor cable of size 1.5 sqmm 1100 volt grade and PVC insulated 3 core complete all as specified and directed

SHASHI CONTRACTORS (BID ID -3251667)

continentalconstructionco. (BID ID -3259314)

B R CONSTRUCTIONS (BID ID -3260717)