SPECIAL REPAIRS TO BLDG NO.65 OR MD ACCN (299 AREA) AT GRC KAMPTEE

Amount

Dismantling of AC corrugated/semi corrugated sheet as in roof coverings, complete all as specified and directed.

Supply and Fixing prepainted 0.50 mm thick galvalume aluminium zinc coating GI based corrugated steel coloured Sheet having tensile strength of 550 Mpa as in roof covering & on chajjas fixed with self tapping screws etc., complete all as specified and directed.

Supply and Fixing prepainted 0.50 mm thick galvalume aluminium zinc coating AZ-150 GI based plain steel coloured sheet in profile pattern having tensile strength of 550 Mpa as in roof serrated ridge fixed with self tapping screws at every 30 CM etc., complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles, complete all as specified and directed.

Material and labour for fly ash Brick curved on plan exc 6 metre mean radius built in cement mortar (1:6), complete all as specified and directed.

Material and labour for rolled mild steel sections in rafters, purlins and posts or hallow square pipe etc. where connected to common rafters and running rails fixed with angle cleats or other connecting plates and nut, bolts or welding etc. confirming to Fe-410 (Gde E-250) , complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including dismantling of ceiling fan, tube light, cable and refixing at same place cover fillets, complete all as specified and directed.

Material and labour for providing and fixing snap grid for false ceiling of size 595x595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel section @ 90grams/sqm, both side inclusive) consisting main ''T'' runner with suitably spaced joints to get required length and of size 24mmx38mm made from 0.25mm thick (minimum) sheet, spaced at 1200mm centre to centre and cross ''T'' of size 24mmx25mmx1200mm made of 0.25mm thick (minimum) sheet,1200mm long spaced between main spaced between main ''T'' at 600mm centre to centre to from a grid of 1200x600mm and secondary cross ''T'' of length 600mm and size 24mmx25mmx600mm made of 0.25mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.4mm including, required cutting/making, opening for services like diffusers, grills light fittings, fixtures , smoke detectors etc, Maint ''T'' runners to be suspended from ceiling using slotted cleats of size 27x37x25x1.0mm fixed to ceiling.4mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.5mm spaced at 1200mm centre to centre along main T , bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specification, as directed by Engr-in-charge.

Material and labour for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping , complete all as specified and directed.

Material and labour for mild steel work in wind tie/hold fasts or similar small articles conforming to Fe 290 Gde E-165, complete all as specified and directed.

Taking down cement plaster on brick/stone walls etc including raking out joint, hacking for key scrubbing down with water etc., complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar 1:6 on walls, surface finished even & smooth without using extra cement etc., complete all as specified and directed.

Material and labour for 15 mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja/roof/ceiling mixed with and including liquid water proofing compound as per manufacturers' instn surface finished even and smooth without using extra cement , complete all as specified and directed. Note: Liquid water proofing compound paid seperately.

Demolition of un-reinforced cement concrete in ground floors and paving’s not exceeding 15 cm thickness, complete all as specified and directed.

Material and labour for 50 mm thick Cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection with fair finished , complete all as specified and directed.

Material and labour for providing cement concrete type C-1, 1:3:6 (20mm graded aggregate) in surface channel & drain including necessary formwork etc., complete all as specified and directed.

Material and labour for PCC type B-0, 1:2:4 (using 12.50 mm graded stone aggregate). 25mm thick in floor, surface finished even & fair, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises, complete all as specified and directed.

Material and labour for coloured Non Skid digital ceramic jointless tiles 8 to 10 mm thick (square/rectangular) are of each tile exc 0.18 Sqm but n. Exc. 0.38 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:4, complete all as specified and directed.

Ditto all as per item Sr No. 19 above but as in dado and except screed bed, complete all as specified and directed.

Material and labour for coloured Non Skid ceramic jointless tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but n. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:4, complete all as specified and directed.

Material and labour for 10mm thick rendering with cm 1:4 on fair faces of brick work or concrete surface finishing rough for receiving wall tiles, complete all as specified and directed.

Material and labour for glazed ceramic tiles colour 450x300x7mm thick in vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match , complete all as specified and directed.

Material and labour for 75 mm thick cement concrete Type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base, complete all as specified and directed.

Material and labour for Machine cut Cudapph stone slab on cooking platform/shelf 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Material and labour for Machine cut Kota stone slab flooring 18-22 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 , complete all as specified and directed.

Material and labour for Kota stone slab 15-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over 10mm thick rendering in cement mortar 1:4, on fair faces of brick work or concrete surfaces as backing , complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame), complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm and not exceeding 4 Sqm each (Without taking off shutters from the frame), complete all as specified and directed.

Material and labour for Second class hardwood (SAL) plain, solid, straight chowkat and frame wrought framed rebated on the solid rounded chamfered put together with glue pinned at joint , complete all as specified and directed.

Supply and Fixing Factory made kiln seasoned chemical treated 35mm thick 2nd class hard wood plain framed panelled shutter (any number of panel with panels of timber flat on both sides, complete all as specified and directed.

Supply and Fixing 30mm thick Flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on both sides face is covered with both side decorative face veneer with lapping/frame to match, complete all as specified and directed.

Material and labour for mild steel, plain, black sheet 0.63mm thick covering to door Chowkats (frames), sides, back of wardrobe etc., cut to size edges beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required, complete all as specified and directed.

Material and labour for mild steel, plain, black sheet 1.00mm thick as in shelves of wardrobe etc., cut to size edges beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required, complete all as specified and directed.

Supply and Fixing solid PVC frame of size 50 mm x 47 mm made out of 5 mm wood grain colour PVC sheet reinforced with MS square tube opening as per drawing, complete all as specified and directed.

Supply and Fixing PVC factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with wood free EPS 2,4,or 6 raised panel design with 2mm thick Moulded PVC sheet on sheet on the front face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site, complete all as specified and directed.

Supply and Fixing factory made solid panel PVC door wire gauged i.e. panel will be of wire gauze both side prelaminated PVC sheet panel. The wire gauge shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S tubes. The wire gauge shall be stretched to tighten firmly partly wired and partly panelled shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S. tube shall be covered with heat moulded plain colour PVC 'C' channels having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour pvc sheet for top rail, panelling of wood grain colour pvc sheet to be fitted in the M.S. framed welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined the together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

Supply and Fixing steel windows with side hung shutters factory made including box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded, complete all as specified and directed.

Supply and Fixing steel ventilator factory made with top hung shutter including hinges steel peg stay with glazing bars, complete all as specified and directed.

Supply and Fixing steel ventilator factory made with top hung shutter including hinges steel peg stay without glazing bars, complete all as specified and directed.

Supply and Fixing framed work such as grills, etc with ends of bars shouldered and or reverted or forged into spikes, framed guard bars and similar work confirming to Fe- 290-0 Gde-E-165, complete all as specified and directed.

Supply and Fixing 3mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane, complete all as specified and directed.

Supply and Fixing 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane, complete all as specified and directed.

Supply and Fixing 100mm long stainless steel butt hinges, complete all as specified and directed.

Supply and Fixing 100mm long butt hinges medium weight cold rolled mild steel and fixed, complete all as specified and directed.

Supply and Fixing 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed, complete all as specified and directed.

Supply and Fixing 250 mm long Aluminium sliding door bolts, bolt type bolt 16 mm dia with and including a min of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

Supply and Fixing 200mm long Aluminium handles, cast type, anodised, complete all as specified and directed.

Supply and Fixing mild steel Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long, complete all as specified and directed.

Supply and Fixing repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

Supply and Fixing for 18/19mm thick prelaminated particle board interior grade both side decorative choice laminations fixed timber frame work including beads etc., complete all as specified and directed.

Supply and Fixing piano hinges, mild steel, bright finish or elctro galvanised and width of flaps size 40 mm, complete all as specified and directed.

Taking down steel tubing and connections of 15 mm bore, complete all as specified and directed.

Taking down steel tubing and connections of 20 mm bore, complete all as specified and directed.

Ditto all as per item Sr. No. 54 above but 25 mm bore, complete all as specified and directed.

Supply and Fixing 15 mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes, fixed to walls and ceilings or laid in floors, complete all as specified and directed.

Ditto all as per item Sr No. 56 above but 20 mm bore, complete all as specified and directed.

Supply and Fixing tubes 25mm bore medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors, complete all as specified and directed.

Dismantling of water tanks and removing to store exc. 250 ltrs & not exc. 500 ltrs , complete all as specified and directed.

Supply, Hoisted and fixed in position rotational moulded polyethylene water storage tanks triple layer (cylindrical with closed top) capacity 500 ltrs, complete all as specified and directed.

Supply and Fixing in repair 20 mm PTMT float valve, high pressure with Polythene floot and flynut complete, screwed for Iron pipe etc, complete all as specified and directed.

Supply and Fixing in repair gun metal gate valve of 20 mm dia with iron wheel screwed both for iron pipe, complete all as specified and directed.

Supply and Fixing in repair sinks with drainage board made of stainless steel with plugs, washer, wastes , brackets etc, overall bowl size 460 X 535 X 203 mm, complete all as specified and directed. Make-Parryware/Nirali.

Supply and Fixing in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass , complete all as specified and directed. Make-Plumber, Parryware & Prayag.

Supply and Fixing in repair 15mm bore angle stop valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union , complete all as specified and directed. Make-Plumber, Parryware & Prayag.

Supply and Fixing in repair 15mm bore concealed stop valves fancy type chromium plated cast copper alloy pressure with crutch or butter fly handles screwed both ends with long shank and cup (concealed type)for iron pipe or for union, complete all as specified and directed. (Make-Plumber, Parryware & Prayag).

Supply and Fixing in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, complete all as specified and directed. (Make-Plumber, Parryware & Prayag).

Supply and Fixing in repair chromium plated shower rose fancy type fixed to 15mm bore pipe, complete all as specified and directed. (Make-Plumber, Parryware & Prayag).

Supply and Fixing Soap dish, vitreous China white, approximate size 160x 160x90mm any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

Supply and Fixing Tubular towel rail, 20mm dia, D type, 60cm long between flanges chromium plated, complete all as specified and directed.

Supply and Fixing Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

Supply and fixing low density polyethylene pipe connection with PTMT nuts suitable for 15 mm bore GI pipe 450 mm long, complete all as specified and directed.

Supply and Fixing EWC vitreous china wash down water closet (pedestal pattern) white with integral foot rests with 'P' or 'S' trap including provn of lime concrete or bedding, complete all as specified and directed.

Supply and Fixing Plastic water closet seat white, closed pattern with flat bottom and cover and mild steel C.P or aluminium hinging device, complete all as specified and directed.

Supply and Fixing Health faucet cp with flexible tube and wall hook, complete all as specified and directed. (Make-Plumber, Parryware & Prayag) .

Supply and Fixing in repair PVC low level flushing cistern white slimline 10 ltrs capacity including PVC bend pipe, handle and float valve , brackets etc., complete all as specified and directed.

Supply and Fixing in repairs Vitreous China W.H.B. white flat back of size 550 x 400 mm, including pvc waste pipe, and brackets or wall hung fixed with bolts etc., complete all as specified and directed.

Supply and Fixing draphary curtain roads with brackets 20-25mm bore cut to length required, complete all as specified and directed.

Supply and Fixing waste coupling chromium plated size 32 mm with long thread, complete all as specified and directed.

Supply and Fixing in repair waste fitting suitable for stainless steel kitchen sink, complete all as specified and directed.

Supply and Fixing stainless steel peg set 6 nos hoock, complete all as specified and directed. (Make-Plumber, Parryware & Prayag)

Supply and Fixing stainless steel Kitchen plate racks size 24x30x10 inch, complete all as specified and directed. (Make-Plumber, Parryware & Prayag)

Taking down eves gutter , gas pipe, sewage pipe and rain water pipes (any size or pattern), including all fittings, head shoes, bends, swan-necks atc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings the accessories) , complete all as specified and directed.

Supply and Fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or trenches 110 mm bore, complete all as specified and directed.

PVC (SWR) bend, (ISI marked), any radius of 110mm bore, complete all as specified and directed.

Supply and Fixing cast iron floor trap with grating 100 mm dia including jointing to waste pipe fixed in PCC type B-I , 1:2:4 etc., complete all as specified and directed.

Supply and Fixing PVC (SWR) junction single, (double T) equal or un equal of 110mm bore of pipe, complete all as specified and directed.

Supply and Fixing PVC (SWR) branch piece 110mm bore, single (single Y) equal or unequal, complete all as specified and directed. Make : Finolex/ Kisan/ Supreme/ Prince

Supply and Fixing PVC (SWR) vent cowl (ISI marked) 110mm bore , complete all as specified and directed. Make : Finolex/ Kisan/ Supreme/ Prince

Roughening surfaces of old concrete floor/terrace by picking including taking down existing deteriorated / decayed tar felt or any treatment including loose surface, scraping with scraper, chiselling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 50 m., complete all as specified and directed.

Material and labour for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with liquid water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc., complete all as specified and directed.

Material & labour for provision of water proofing treatment by using APP torch on mineral/slate finished membrane over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sq m on clean and dry surface and then providing APP membrane having non woven. polyster film reinforcement with 3 mm thick and weight not less than 3 .00 kg/sq m and finished on top with mineral/slate finished torch on system laid with 100 mm & 150 mm over lap on side & end laps respectably complete all as per manufacturers compound , complete all as specified and directed.

Supply only liquid water proofing compound ISI marked, complete all as specified and directed.

Material and labour for 20mm thick Screed bed or bedding layer of cement mortar 1:4, complete all as specified and directed.

Material and labour for chequered rubber moulded cement concrete tiles size 30cm x 30cm x 25 mm thick set, jointed and pointed in grey cement and pigment and fixed with cement slurry in floors, complete all as specified and directed.

Bitumastic gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cm x 8cm at the junction of roofing to vertical surfaces, complete all as specified and directed.

Supply and Fixing in repair aluminium anodized hasp & staple safety type with mild steel hinge pin including bolt to hinge plate fixed with screws of 100mm size , complete all as specified and directed.

Complete removal of existing surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots of walls, complete all as specified and directed.

Material and labour for preparation of old plastered surfaces of ceiling and applying one coat of white wash, complete all as specified and directed.

Material and labour for two coats of oil emulsion distemper (acrylic) white or tinted or any colour including preparation of over one coat of putty surface of walls and etc., complete all as specified and directed.

Material and labour for two coats of oil emulsion distemper (acrylic) white or tinted or any colour including preparation of over one coat of putty surface on ceiling etc., complete all as specified and directed.

Preparation of plastered or un-plastered surface / complete of existing treatment and applying two coat of cement base paint on wall over a coat of primer, complete all as specified and directed.

Material and labour for two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or girth over one coat of pink primer including preparation of surfaces, complete all as specified and directed.

Material and labour for one coat of synthetic enamel paint over old painted wooden surfaces of any description not otherwise described over 10cm in width or girth including preparation of surfaces, complete all as specified and directed.

Material and labour for two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface, complete all as specified and directed.

Material and labour for preparation of old steel surfaces of any description over 10 cm width of girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Material and labour for Precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6, complete all as specified and directed.

Material and labour for mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

Supply and Fixing rolled mild steel section in framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging of grade Fe 410-S, complete all as specified and directed.

Supply and Fixing for Marble 20 mm thick of , machine cut as in riser,plat form set and jointed in white cement slurry over 15mm thick rendering in cement mortar (1:4) and pointed in white cement including cutting, polishing (mirror type)or use in shelf and cupboard etc, complete all as specified and directed.

Material and labour for 15mm thick screed bed or bedding layer of cement plaster 1:4 with water proofing compound for sunken floor treatment finishing even and smooth without using extra cement, complete all as specified and directed. Note: WPC will be paid separately.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm incl. cleaning surfaces, complete all as specified and directed.

Material and labour for cement concrete Type D2 1:4:8 (using 20mm graded stone aggregate) in sunken floor, complete all as specified and directed.

Removing building materials to a distance of 100m or under, beyond the lead including in the rates including loading, unloading and stacking at the destination, complete all as specified and directed.

Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to macth with existing surfaces including white washing/colour washing/ distempering to match with existing wall/floor/ceiling finishes, complete all as specified and directed.

Taking down sheet metal enclosure, DB & MCBs main switch etc and making good distrubed sufaces to match with exisiting surfaces, complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces, complete all as specified and directed.

Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specifed and directed. Cable Make : Polycab, Havells, Finolex, L&T, Legrand PVC Conduit Make : Polycab, Modiplast, Finolex. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

Ditto all as per item Sl No 119 here in before but One ceiling/exhaust fan point controlled by oneway switch and regulator, complete all as specified and directed.

Ditto all as per item Sl No 119 here in before but One 3 pin 5 amp socket outlet point on the same board with other switches, complete all as specified and directed.

Ditto all as per item Sl No 119 here in before but One 3 pin 5 amps socket out let point on independent board, complete all as specified and directed.

Ditto all as per item Sl No 119 here in before but One bell/buzzer point controlled by one bell push, complete all as specified and directed.

Ditto all as per item Sl No 119 here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point.

Material and labour for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm, complete all as specified and directed. Cable Make : Polycab, Havells, Finolex, L&T, Legrand. PVC Conduit Make : Polycab,Modiplastr, Finolex. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same Make.

Supply and fixing for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make: Anchor / Roma/ legrand/ Crabtree.

Supply and fixing for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switchboxes, complete all as specified and directed. Make: Anchor / Roma/ legrand/ Crabtree.

Supply and fixing for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make: Anchor / Roma/ legrand/ Crabtree.

Supply and fixing for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make: Anchor/Roma/ legrand/ Crabtree.

Supply and fixing ceiling rose, surface type, three terminals 5 amps, complete all as specified and directed.

Supply and fixing Electric Bell Ding dong AC 230 volts, single phase, complete all as specified and directed.

Supply and fixing bell push switch modular type single pole one way 5 amp 240 volts, complete all as specified and directed. Make: Anchor/ Roma/ legrand/ Crabtree.

Supply and fixing 0-4 step -2 module modular type electronic regulators for ceiling fan 1200/1400 mm sweep, 240 volts, 120 watts single pole complete all as specified and directed. Make: Anchor / Roma/ legrand/ Crabtree.

S & F 18-22 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 2 core 1 sqmm copper conductor cable complete all as specified and directed. Makes: CG-LDL-20-CDL/ Philips/ Wipro.

Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed.

Supply and fixing LED light fitting 10W bulk head luminaries with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable suitable size of 230V, 50Hz complete all as specified and directed. Make: Bajaj Cat Part no BIBWP 10W / LBHN 10 WW of CG.

Supply and fix building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc. complete all as specified and directed. Make : CG LSTS-25-CDL/ Philips/ Wipro.

Supply and fixing Exhaust fan metallic body 300mm sweep, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, and making holes complete all as specified and directed. Make: Bajaj/ CG/ Havells.

Supply and Fixing MCCB TPN 40 amps 415 V 50Hz 16ka with enclosure complete all as specified and directed connecting with incomer cable using suitable size lugs as requires and connection to main DB using 10 sqmm X4 FRLSH copper conductor complete all as specified and directed. Make: Legrand/ Siemens/ Schneider.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed. Make- Legrand/Hegger /L&T.

Supply and fix MCB Triple pole & neutral 240 volt 40 to 63 amps 10 KA, complete all as specified and directed. Make:-Legrand, L&T, Hager.

Supply and fix MCB single pole & neutral 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. Make:-Legrand, L&T, Hager.

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. Make:-Legrand, L&T, Hager.

Earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protec-tion pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.1,13,325.00/- ]

NORTH INDIA PEST CONTROL

M/S L M Chourasia

Meet Road Lines

M/s Rahul Traders

Bidder Name

Meet Road Lines

SHUB CONSTRUTION

M/S L M Chourasia

M/s Rahul Traders

NORTH INDIA PEST CONTROL