PROVN OF DRAINAGE SYS BATHROOM AND TOILETS WITH ALLIED INFRA AT PARA SF BN HARD STANDING FOR VEHICLE PARKING LINK ROAD PROTECTIVE WK AND ALLIED INFRA AROUND SWT AT ASD TOILET AND BATHROOM AT INF BN AND CERTAIN MINOR WORKS UNDER GE SOUTH UDHAMPUR

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation and not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Returning, filling including spreading leveling watering and well ramming in layers not exceeding 25 mm in any type of soil complete all as specified and directed.

Removing excavated material (soils) exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

RCC (Design Mix) M-25 (20 mm graded aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-Charge.

RCC (Design Mix) M-25 (20 mm graded agg) as in Columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge.

PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs etc complete all as specified and directed by Engr-in-Charge.

RCC (Design Mix) M-25 (20 mm graded aggregate) as in beams, gable beam, cantilever bressumer lintles over 1.5 m span and the like complete all as specified and directed by Engr-in-Charge.

RCC (Design Mix) M-25 (20 mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge.

Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter complete all as specified and directed.

Formwork to flat sides of columns and stanchions complete all as specified and directed.

Formwork to flat sides and soffits of or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams complete all as specified and directed.

Formwork to soffits of suspended flat slabs such as roof slabs, landings and similar work not exceeding 200 mm thick (Horizontal or sloping) complete all as specified and directed.

Formwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar work exceeding 10 cm but not exceeding 20 cm wide complete all as specified and directed.

TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per ser item No. 18 above but 5 mm dia and over including 10 mm dia in stirrups, spaces and binders etc complete all as specified and directed.

10 mm thick on fair faces of brick/ concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

15 mm thick rendering in two layers (10 mm + 5 mm) on fair faces of brick/ concrete or stone surfaces in cement mortar 1:4 and finished even and fair without using extra cement complete with water proofing compound complete all as specified and directed. (WPC shall be measured separtely).

Supply only Liquid water proofing compound complete all as specified and directed.

05 mm thick cement mortar 1:4 rendering on fair surfaces of ceiling work and finished even and smooth without using extra cement complete all as specified and directed.

10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and directed.

Preparation of new plastered surfaces on walls and applying three coats of white wash complete all as specified and directed.

Preparation of new plastered surfaces on ceiling and applying three coats of white wash complete all as specified and directed.

Preparation of new plastered surfaces on walls and applying two coats of cement based paint complete all as specified and directed.

Preparing newly surfaces, plastered or unplastered of wall and applying two coats of weather proof exterior paint (Apex Ultima) on any surface as approved and complete all as specified and directed by Engr-in-Charge.

Shingle filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and blinded with earth and rammed including watering complete all as specified and directed.

75 mm thick cement concrete (1:4:8) type D-2 as sub base to floor complete all as specified and directed.

25 mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in floor and finished even and fair complete all as specified and directed.

10 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

Non-skid coloured ceramic tiles (square/ rectangular) 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

Glazed ceramic tiles in vertical surface 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface complete all as specified and directed.

50 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 sqm each) area with 6 mm wide joints and 10 mm wide joints between the walls and plinth protection, finished even and smooth without using extra cement, outward slope of not less than 1:12, the joints shall be filled with mastic filling comprising one coat of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed.

Mild steel ventilators (Box type) factory made with top hung shutters and bottom fixed type shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed. Note : (i) The window shall be fabricated as per Drg CEUZ/TD/1269/2008 Sh 1/3 (ii) Glazing, wire gauge shall be measured and paid separately.

Framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290.Gde-E-165 quality A incl one shop coat of zinc chromate primer paint incl preparation of surfaces at contractor's workshop before fabrication complete all as specified and directed.

4 mm thick glass sheet of ordinary quality not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Preparation of newly steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing complete all as specified and directed.

Factory made solid panel PVC Moulded door shutter 28 to 30 mm thick stiles with 2, 4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face and 2 mm thick plain coloure PVC sheet on back face complete all as specification and drawing complete all as specified and directed.

Aluminum handles cast type, anodised, 150 mm size complete all as specified and directed.

Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and directed.

Mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and directed.

10 mm thick rendering in cement mortar 1:3 on roof sufaces, finished even and smooth without using extra cement complete all as specified and directed. Note :- Supply only water proofing compound shall be measured and paid seperately under the respective item.

Applying bituminous primer on roof surfaces @ 0.40 liters/Sqm and applying one coat of semi hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and thereafter supply and laying 3 mm thick polymeric water proofing membrane, five layered of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10 cms (overlaps to be thermo fused by flame) followed by another coat of provide aluminium paint as per manufacturing instruction complete all as specified and directed. Note:- Water proofing treatment will be done by IWL or through a specialized agancy.

Steel water tubing of nominal bore dia 15 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

Steel water tubing of nominal bore dia 20 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

20 mm dia, Ball brass, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

500 ltrs capacity rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed in SSR Part I.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including cast iron P trap, bore of pipe 100 mm and provision of concrete bedding complete all as specified and directed.

10 litres Vitreous China valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Supply Only Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed.

PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Angle valve, cast copper alloy fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and directed.

Shower roses 15 mm chromium plated with or without swivel joints, any size, including 125 mm long arm and fixing to steel pipe or union complete all as specified and directed.

Stop valve (concealed type), cast copper alloy fancy type, chromium plated with long shank and cup screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and directed.

Stainless steel wall mounted cloth hanger with 6 peg set complete all as specified and directed as approved by Engr-in- Charge

15 mm dia bib tap fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Vitreous China wash basin (Pedestal), white, flat back, size 550 mm x 400 mm excluding tap, chain, plug and porcelain stopper but including brackets and cutting for and pinning in ends of brackets complete all as specified and directed.

Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

Vitreous china urinal partition white of size 310 x 700 mm about 40 cm above floor line complete all as specified and directed.

Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60 gms) complete all as specified and directed.

32 mm dia PVC waste pipe complete all as specified and directed.

Pillar taps 15 mm bore fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' and cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

Brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

Chromium plated soap dish and fixed with CP brass screws in wooden/plastic cleat complete all as specified and directed.

100 mm dia cast iron sanitary connection pipe upto 300 mm length complete all as specified and directed.

Cast iron soil, waste and vent pipes (sand cast) 100 mm bore in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed.

Cast iron soil, waste and vent pipes (sand cast) 75 mm bore in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed.

Cast iron soil, waste and vent pipes (sand cast) 75 mm bore in any length with or without ears with cement joints fixed to wall complete all as specified and directed.

Cast iron bend (any radius) diminishing pieces or tapers 100 mm bore fitted with oval access door complete all as specified and directed.

Cast iron bend (any radius) diminishing pieces or tapers 75 mm bore fitted with oval access door complete all as specified and directed.

75 mm bore Cast iron cowls complete all as specified and directed.

Cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified and directed.

Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms moulds, mitered/stopped ends etc complete all as specified and directed.

Mild steel TMT bars 6 mm to 8 mm dia cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and incl mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Providing Precast cement concrete 1:2:4 type B-1 (20 mm graded aggregate) as in manholes cover slab etc complete all as specified and directed by Engr-in-Charge.

Rough excavation not exceeding 1.5 m deep and getting out in hard/dense soil complete all as specified and directed.

Excavating over areas not exceeding 1.5 m deep and getting out in hard/dense soil complete all as specified and directed.

Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

Precast cement concrete Block (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in bond stones set in cement mortor 1:6 complete all as specified and directed.

Raised pointing to random or polygonal rubble, uncoursed or brought upto courses stone masonry in cement mortar 1:4 complete all as specified and directed.

PVC 110 mm dia pipe in any length with rubber rings joints laid as in weep holes complete all as specified and directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 20 mm to face stones (Granite or Trap stone) and dressing of face beds and joints, as specified of ranom rubble walling, uncoursed or brought upto courses complete all as specified and directed.

Spreading and leveling watering and well ramming in layers not exceeding 25 mm in any type of soil complete all as specified and directed.

Earth filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Providing 150 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in floor/ sub-base complete all as specified and directed.

Providing 100 mm thick cement concrete 1:2:4 type B-2 (using 40 mm graded crushed stone aggregates) as in floor/ sub-base complete all as specified and directed.

Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound Grade "A" and thickness of concrete slab in 100 mm complete all as specified and directed.

Providing 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in floor/ sub-base complete all as specified and directed.

Sand cushioning under floors including watering and consolidation complete all as specified and directed.

80 mm M-40 grade thick, vibro mechanically pressed glossy finished concrete interlocking paver block any shape and size confirming to IS-15658-2006, with topping of cement mixed with grey cement and with pigment. Colour and shape shall be approved and complete all as specified and directed by Engr-in-Charge.

80 mm M-40 grade thick, vibro mechanically pressed glossy finished concrete interlocking paver block any shape and size confirming to IS-15658-2006, with topping of cement mixed with grey cement and with out pigment. Colour and shape shall be approved and complete all as specified and directed by Engr-in-Charge.

Machine pressed (factory made) precast plain cement concrete 1:2:4 type B-1 (20 mm graded crushed stone aggregate), kerb stone of size 300 mm X 300 X 100 mm thick, laid in trenches on edges of roads, including excavation in any type of soil, PCC bed, retuning filling and removal of surplus soil to a distance not exceeding 50 m from the starting point complete all as specified and directed.

RCC M-25 design Mix (20 mm graded agg) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Flush pointing to block in to random rubble masonry, uncoursed or brought upto in cement mortar 1:4 complete all as specified and directed.

Hard core of broken stone or boulders of gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

PCC 1:2:4 type B-1 (using 20 mm graded aggregate) in surface channel and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms moulds, mitered/stopped ends etc complete all as specified and directed.

20 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and finished even and smooth without using extra cement complete all as specified and directed.

450 mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed.

Cement concrete 1:4:8 type D-2 (40 mm graded aggregate) in bed to 450 mm dia pipes including packing under and haunching against the sides of pipes after they are laid and tested for complete all as specified and directed.

20 mm thick screed bed are bedding layer of cement mortar (1:4) for laying floor finishes complete all as specified and directed.

Glossy finished chequered coloured cement concrete tiles 30 cm x 30 cm x 30 mm thick, machine pressed, factory made, set jointed and pointed in neat cement slurry, laid in floor with grey cement and pigment complete all as specified and directed.

Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar work confirming to Fe 410-0 or Fe 310-0 complete alln as specified and directed.

Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc, complete all as specified and directed. (each line wire to be measured).

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed.

PCC 1:2:4 type B-1 (20 mm graded aggregate) as in in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance Pieces, cleats etc Fe 410-(Gde-E-250) quality-A complete all as specified and directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to I. S. 1161-1979 grade St.-240 complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.60 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Coloured machine pressed/vibro mechanically floated glossy finish precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with topping of cement mixed with imported pigment, colour and shape shall be approved and complete all as specified and directed by Engr-in-Charge.

Septic tanks exceeding in ordinary soil, foundation in PCC 1:2:4, brick work in cement mortar 1:4, RCC slab covers including RCC precast manhole cover having 6 mm plate embedded all around/ fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc. complete for 10 users complete all as specified and directed.

Soakage wells exceeding in ordinary soil, foundation in PCC 1:3:6, wells of Honey combed and solidin M-25 concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-25/RR masonry/filling with brick bats, complete of size but 1.20 mx 3.0 m deep complete all as specified and directed.

Framed work as in frames to manhole covers of angle or other section including hold faet confirming Fe-410-O complete all as specified and directed.

150 mm bore salt glazed stone ware drain pipes laid in trenches and jointed complete all as specified and directed.

Plain cement concrete 1:4:8 type D-2 (using 40 mm graded aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipes complete all as specified and directed.

Point wiring for one light/fan/Exhaust fan controlled by one switch using 1.5 Sqmm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit (thickness not less than 1.5 mm and 20 mm dia), medium grade with Modular metal flush boxes & PVC back plate for mounting modular type in adequate module of switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sqmm as earth wire stranded and conected to earth dolly complete all as specified and directed.

All as per ser item No 125 but for one sheet metal enclosure single pole & neutral concealed on wall independent with PVC insulated, unsheathed FRLS cable 4.0 sqmm copper multistrand condutor, alongwith PVC insulated and unsheathed FRLS cable 2.5 sqmm multi stranded copper conductor earth wire connected to common earth and earth dolly including making good the disturbed surfaces complete all as specified and directed by Engr-in-Charge. Make - KEI, Finolex, polycab.

All as per ser item No 125 but for 3 pin 5 Amps socket outlet independent including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and directed.

Modular switch 6 Amps single pole one way with outer strip complete all as specified and directed.

Socket combined 2-in-1, 3 Pin 6 Amps (Modular Type) with outer strip complete all as specified and directed.

Sheet metal enclosure Single pole & neutral with 2 pin and earth plug and socket 20A 240 complete with one single pole MCB of any cap from 10 to 20 A complete all as specified and directed.

Ceiling rose surface bakelite 3 terminals complete all as specified and directed. Make : Cona Cat Part No 2126/SSK Cat Part No 572 or equivalent of make in Havells/Anchor/Kolors.

Exhaust fan Ventil Air - DB 300 mm including louver complete all as specified and directed. Make - Havells/Polycab/ Bajaj.

Geyser (water heater) storage type, Electric Supplied and installed complete capcity of 25 Ltrs complete all as specified and directed. Make - Havells (Monza) Including all GI connection (cutting T, inserting all type of (Elbow, Nipple etc)

New E-Lite LED Curve, high lumen batten with efficacy of 100 lumens in 20 W, Make- Havells Cat Part No LHEXBXPNIN1W020 or equivalent to Polycab/HPL/Bajaj complete all as specified and directed by Engineer-in-Charge.

Replacement of New E-Lite LED Curve, high lumen batten with efficacy of 100 lumens in 10 W Make- Havells Cat Part No LHEXBXPNIN1W010 or equivalent to Polycab/HPL/Bajaj complete all as specified and directed by Engineer-in-Charge.

Replacement of LED bulk head luminaire, 10 W (ENDURA RUGBY) Cat Part No. LHEOAOP7UZ6W010 230 Volts wall/ surface mounted complete with with LED lamp 10 watt, with all accessories, pre-wired, including providing flexible copper wire, twin core cable complete all as specified and directed by Engineer-in-Charge.

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note - MCBs will be measured separately.

Replacement MCB Single Pole, 230 Volt, Rating 6 to 32 Amps complete all as specified and directed. Make : Indoasian Cat Part No : 811015,or equivalent Havelles/Standard

Replacement MCB Single Pole and Neutral, 230 Volt, Rating 32 to 63 Amps complete all as specified and directed. Make : Indoasian Cat Part No 811037 or equivalent Havelles/Standard

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25 mm dia including PVC insulated copper conductor cable 4 Sq mm as earth lead complete all as specified and directed. Including taking down old sub main wire.

Earthing complete with galvanised steel earth plate electode 600 mm x 600 mm x 6.00 mm thick burried directly in ground (earth pit not less than 2.25 meter deep below normal ground level connected to and including galvanised steel earth lead wire 4 mm dia by means of bolts, nuts, chock, nuts and washers of galvanised iron or steel including PCC Pit in 1:2:4 type B-1 angle iron frame with RCC cover and handle, excavation and earth work in any type of soil medium grade GI watering pipe 20 mm bore with funnel and wire mash and light grade GI protection pipe 15 mm bore upto main board complete all as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected to main control board complete all as specified and directed and testing completion.

Trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10 Sqmm x 2 core size complete all as specified and directed including taking down old cable. Note : Earth work and other connected work shall be measured & paid sperately.

Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete all as specified and directed. Note : for payment purpose punned thickness shall be measured.

Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and directed.

GI tubing light grade 40 mm dia along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and directed.

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note - MCBs will be measured separately.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 4 Sqmm in PVC concealed conduit 25 mm dia including PVC insulated copper conductor cable 2.5 Sqmm as earth lead complete all as specified and directed. Including taking down old sub main wire.

ashok kumar

RAMAN CONSTRUCTION CO

khajuria builders

R K BUILDERS