Improvement works to the ESP control room and compound wall around hopper of Unit 2.

Amount

Dismantling of existing RCC with compressor Proclain / Hitachi due to urgency & clearing the debries 1 Km. away from the site.

Earth work excavation in all soils such as sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil and depositing on bank with an initial lead of 10m and initial lift of 2m and disposing the excavated earth 1Km. away from the site including cost of all materials, labours, lead, lift, etc. complete.

Chipping the damaged plastered & roughening surface and dispose the debries away from the site including labour, lead, lift, transporting charges, etc. complete.

Providing Brick work in CM 1:5 using second class ground moulded Chamber burnt bricks (9" x 4 ⅜" x 2 ¾") including cost of all materials, labours, lead, lift, curing, etc. complete

Plastering with CM 1:5 12mm thick with Nitobond AR to be mixed in Cement mortar @ 1Lit. Per bag, including cost of all materials, labour, lead, lift etc., complete.

Providing one coat of white wash with white cement to the newly plastered area including cost of all materials, labour, lead, lift etc., complete.

Painting the new plastered wall surface with two coat of enamel paint over one coat of primer of approved colour, brand & quality including cost of brush, paint, scaffolding charges etc., complete.

Painting two coats with ready mixed enamel paint for the old wall / wood surface including cost of all materials, scaffolding charges, thorough cleaning of surface, labours, lead, lift, curing, etc. complete

Painting the old iron work with two coats of enamel paint of approved colour, brand & quality including cost of brushes, scaffolding charges, labour, lead, lift etc., complete.

Providing two coats of snowcem painting of approved colour & quality on new outer walls over one coat of white primer, including cost of all materials, labours, , lead, lift, curing, etc. complete

Supplying and providing 6mm wired glass for windows in replacement of damaged glass including fixing 8mm U channels, screws, glass, putty including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing wash basin 550x400mm with all accessories such as cast iron brackers, 32mm dia C.P.waste coupling, rubber plug & chain, 32mm dia. B Class GI washer pipe, 15mm dia GM wheel valve, 15mm dia nylon, pickcook connection etc., including cost of all materials, labours, lead, lift, curing etc etc., complete.

Supplying and laying and fixing in position of 15mm dia GI pipe and specials rate including cost of all materials, labour, lead, lift etc., complete.

Supplying and fixing in position of 15mm Wheel valve rate including cost of GI pipe, labour, lead, lift etc., complete.

Providing and fixing in position of aluminium anodized glazed single leaf door with inner frame section using 45 x 45 x 2mm for top and middle and vertical, door frame section using 100 x 45 x 2mm for door and shutter bottom with 5mm thick plain glass with sun control film on top and bottom using aluminum anodized beading with all necessary standard hardwires such as handle, tower bolts, safety rod with full thread locking arrangement etc., complete including cost of all materials labour, lead, lift etc., complete.

Supplying & providing good quality solid MDF (Medium density fibre) door shutters using 35mm thick MDF board including fixing the same to the existing wooden frames, rate including cost of MDF board shutter, handle, lock, tower bolt, with all lead, lift, labour, fixing, etc., complete.

Supplying and providing hydralic Floor Spring of approved quality, manufacture as per BIS standards for doors, hydraulic Floor Springs with double acton adjustment like HARDWYN make (U-32) or equivalent including cost of all materials, labour for fixing, lead, lift, etc., complete.

Providing false ceiling with Thermocool 25mm thick over the Aluminium section 25x25x1.6mm (T & L angle) with 50cm c/c in one direction 100cm c/c in another direction with 6mm dia M.S. rod as stiffner at a distance of 1.25m c/c including cost of all materials, labour, lead, lift, scaffolding charges etc., complete.

Removing the existing damaged felt and cleaning the surfacce free from oil, dust, dirt, grease etc., and transporting the debries with 1km lead away from the site and lowering fro the surface with water till the saturation for the entire area, rate including labour, lead lift etc., complete.

Plastering with C.M 1:3, 12 mm thick with Nitobond AR mixed in cement mortar at 250ml/bag of cement rate including cost of all materials, labours, lead, lift, curing, etc. complete

Charges for providing water proof treatment over the existing roof slab with polymeric asphalt membrane sheet (4kg/m2) constituting 7 layers with thermo fusible HM HDFE film one at top and other of bottom layer of this polymeric mix 1 layer of fibre glass tissue, 2 layers of polymeric mix on the top and bottom of 90 microns HM HDPE film, cracks on roof slab to be filled with cement based filter, laying of PAM sheets over a coating of 90/15 hot blown bitumen with 100mm over lap sealed by LPG flame torch further coated with oxides bitumen 90/15 and finally coated with aluminium coating and also extra attention should be given in roof / drain curve portion as per instruction of site Engineer including cost of all labour, lead, lift, T& P etc complete.

Supplying and fixing 4 Kg/CM2 PVC pipe of approximate quality size of 160mm dia. Including cost of specials, all other materials required, labour, lead, lift, etc., complete.

MONISHA ENTERPRISES