SPECIAL REPAIR TO SMQ AT AFS YELAHANKA

Amount

M&L for 25 mm thick sand filling in bedding layer for laying floor finished complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregates) as in shelves complete all as specified and directed.

Supply only approved integral water proofing compound, Conplast x 421 IC of make - M/s Fosroc Chemical (Inida) Ltd or equivalent in make - Dr Fixit/ STP Ltd.

Cutting holes in brick walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0) using 12.5 mm graded aggregate, depth of embedded portion of hold fast not exceeding half brick complete all as specified.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:6, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius built in CM 1:4 in half brick thick complete all as specified and directed.

Taking down door chowkats or frames not exceeding 1.50 sqm with shutters (without taking off shutters from the frame) of any description complete all as specified.

Taking down door chowkats or frames exceeding 1.50 sqm but not exceeding 4 sqm with shutters (without taking off shutters from the frame) of any description complete all as specified.

M&L for taking down shuttes of any description exc 1.00 Sqm and n.exc 2.00 Sqm, cupboard shutters all as specified and directed.

M&L for taking down shuttes of any description exceding 2 Sqm each and refixing in the same opening all as specified and directed.

M & L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia, all as specified & directed. NOTE (i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) (ii) 5mm tolerance in dimension i.e. depth and width of profile shall be allowed for door/window frames.

M & L for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia, all as specified & directed. NOTE (i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) (ii) 5mm tolerance in dimension i.e. depth and width of profile shall be allowed for door/window frames. Make - BLACK COBRA /SMP/IMPEX or Equvalent).

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing edges will be painted to match with prelam sheet all as specified and directed. (Make - BLACK COBRA /SMP IMPEX or Equvalent).

M&L Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified & directed. NOTE : Butt hinges and necessary S.S screws shall be paid separately

S&F &L 35mm thick Factory made solid WPC decorative type (Wood Polymer composite) WIRE MESH door shutter with S.S wire mesh in any number of division with brown wood grain texture, cluding s. wire mesh shall be fixed with 15x15 square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be 650 or as per manufacture instruction complete all as specified and complete all as specified and directed. (Note. Material test certificate and authentication should be compulsory provided by the manufacturing company)

S&F powder coated anodised aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including joing cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed.

S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats and locking arrangement, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

S & F Mild Steel powder coated framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for TMT bars 6 to 8mm dia for reinforcement cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding withand including mild steel wire (annealed)not less than 0.9 mm dia etc complete, all as specified and directed.

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed.

S&F Brass, sliding door bolt 250 mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F for brass, barrel tower bolt 150mm with cast or sheet barrel and of extruded section rolled or cast bolts and fixed complete all as specified.

S&F for extruded brass handle 150mm fabricated type polished complete all as specified.

S& F for Mortice latch 65 mm lenth with two levers (vertical type), brass body and fixed all as specified and as directed

Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate complete all as specified..

S&F Brass 300 mm ordinary rat rail rod pattern springs incl roller and roller plate complete complete all as specified.

M&L 75 mm thick palin cement concrete 1:3:6 type C-2 (20 mm graded aggregate) for plinth protection complete all as specified and directed..

M & L for 75 mm thick PCC 1: 3 :6, type C-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M & L for Machine pressed precast rubbed moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade jointed with grey cement and pigments complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of ech tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc,laid in 1.50mm spacer and grouted with epoxy joint filling material set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screedd bed 15 mm thick in CM (1:6) complete all as directed and specified.

M&L Glazed coloued Ceramic tiles of size 450x300X7mm thick set and jointed in neat cement slurry incl matching PVC corner beading and pointed in white or colour cement to match as in skirting/dado over 10 mm thick rendering in CM 1:4 finished all as specified and directed

M & L Non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of ech tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screedd bed 15 mm thick in CM (1:6) complete all as directed and specified.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed all as specified.

M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs pillar window cill, coocking plot forms and including 20mm thick cement mortar (1:4) incl pointing in white cement ( tiles 20mm thick machine cut, bedded and ;jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone (i) using morble dust with admiture of pigment to match incl rounding and polishing to edges of granite slab all as specified and directed. .

Supply and fix polished sadarahalli granite stone slab flooring 20 to 22 mm thick (area of tile/slab exceeding 0.36 Sqm) with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick screed bed in cement mortar 1:4 complete on staicase incl rounding and polishing to edges of granite slab complete all as specified and as directed.

Supply and fix 10-12mm thick polished sadarahalli stone tiles in vertical surfaces (area of tile exceeding 0.10 Sqm but not exceeding 0.36 Sqm), over 10mm thick cement mortar 1:4 incl rounding and polishing to edges of granite slab complete all as specified and as directed.

Taking down cement plaster from brick or stone including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description all as specified and directed.

M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls all as specified and directed.

M&L 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall all as specified and directed.

M & L for Removing the existing unserviceable tar felt or any type of felt of any description from roof slab alongwith screed bed, including cleaning the surface etc complete all as specified & directed.

Material and labour for rendering 15mm thick (average) in cement mortar 1:4 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and directed. Note:- supply only of water proofing compound will be measured and paid seperately under relevant item

M & L for laying/fixing TPO membrane of non flammable water proofing of roof which shall be a 1.50 mm thick loose laid membrane using FOSROC Proofex ORG membrane or its equivalent in STP/CIPY/SIKA/PIDILITE DR FIXIT, in layers overlapped to achive a minimum weld of 110mm. Hot air welding should be by means of automatic machines and the roller either end are overlapped with 110mm are in staggered position and the membrane shall be laid over the layers of non woven geotextile fiber. The separation layer provided to prevent the mechanical abrasion and and cushioning between the fosroc proofex ORG and the concrete sub structure. The termination of Fosroc Proofex ORG by aluminium strip anchoring. Note: Work shall be executed by authorized applicator with prior experience of more than 5 years on applying similar system.

M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble all as specified and directed.

S&F 4mm thick black tinted sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane fixed with aluminium window and ventilator all as directed.

S&F 4mm thick figured glass Pin heated and glazing with oil putty in square not exceeding 0.50 Sqm in each pane fixed with aluminium window and ventilator all as directed.

S&F black tinted sheet glass ordinary quality 4mm thick as in doors,window, showcase alum frame work & similar work with or without glass roller area exceeding 0.50 Sqm including neoprime gasket all as directed.

M&L preparation of old decorated wall surface and applying two coat of White wash, all as specified and directed.

M&L Preparing old painted wooden surface and applying one coat of Synthetic enamel Painting all as specified and directed.

M&L Preparing old painted steel surface and applying one coat of Synthetic enamel all as specified and directed.

M&L preparation of old decorated ceiling surface and applying two coat of oil bound distemper, all as specified and directed

M& L for new wall surface applying waterproof cement based putty @ 300 Gm (undiluted) per Sqm of average thickness 1 mm over the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust and applying two coats of oil bound emulsion distember over one coat of interior wall primer using airless spary technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray macine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying oil emulsion should be able to spray in hard to reach area and penetration of oil emulsion on the surface etc. byskilled labour as per following steps complete all as spd and directed:- (a) Mix the putty powder by adding water as per manufacturer instructions and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute. (b) Apply the first coat the prepared mixer with the help of fully automatic airless spary machine of putty aplication having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (c ) Allow 6-8 hrs time to dry the putty surface.

M& L for new wall surface applying two coats of cement base paint over one coat of wall primer using airless spary technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray macine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. byskilled labour as per manufacturer instructions complete all as spd and directed:-

Complete removal of existing treatment by scrapping with machanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make the surface free from dust ,loose paint etc by skilled labour and applying waterproof cement based putty @ 300 Gm (undiluted) per Sqm of average thickness 1 mm over the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust and applying two coats of oil bound emulsion distember over one coat of interior wall primer using airless spary technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray macine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying oil emulsion should be able to spray in hard to reach area and penetration of oil emulsion on the surface etc. byskilled labour as per following steps complete all as spd and directed:- (a) Mix the putty powder by adding water as per manufacturer instructions and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute. (b) Apply the first coat the prepared mixer with the help of fully automatic airless spary machine of putty aplication having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (c ) Allow 6-8 hrs time to dry the putty surface.

Complete removal of existing treatment by scrapping with machanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make the surface free from dust ,loose paint etc by skilled labour and applying two coats of cement base paint over one coat of exterior wall primer using airless spary technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr the spray macine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. byskilled labour as per manufacturer instructions complete all as specified and directed.

M&L for Writing letters or figures (Block, Roman, italic or Indian) not exceeding 30 cms height, all as specified and directed.

M&L for Writing stops, commas, short lines dashes, hyphens, brackets, all as specified and directed.

Taking up or down 15mm steel tubing and connections all as specified and directed.

Taking up or down 20mm steel tubing and connections all as specified and directed.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified.

S&F 20 mm dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

S&F CPVC pipes 25 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling or laying in floor including fitting in floors all as specified

S&F in repair gun metal globe gate valve 20 mm bore, complete all as specified..

S&F in repair gun metal globe gate valve 25 mm bore, complete all as specified..

S&F in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe fixed in repair all as per Cat part No - S1053121 of make - Cera or Equvalent in other makes, all as specified and as directed.

S&F in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm including brackets, all as specified and as directed .Make :

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S&F plastic pedestal pattern seat cover white with flat bottom with cover & MS chormium plated fixing device, all as specified and directed.

S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union, all as per Cat part No - FON-CHR40037 of make - JAQUAR or Equvalent in other makes.

S&F in repair Brass CP wall Mixer 2 in 1 for hot and cold water screwed down for iron pipe and fixed for 15 mm dia all as per Cat Part No - FLR- CHR-5273UPR of make - JAQUAR or Equvalent in other makes.

S&F in repair Brass CP centre hole Mixer for hot and cold water screwed down for iron pipe and fixed for 15 mm dia, all as per Cat Part No - FLR-5169NB of make - JAQUAR or Equvalent in other makes.

S&F in repairs 15 mm dia two way bib taps (fancy type), cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore all as per Cat Part No. CON-CHR-083 FTK of make - JAQUAR or Equvalent in other makes.

S&F in repairs 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions all as per Cat Part No. ARI-CHR-39053 of make - JAQUAR or Equvalent in other makes.

S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm including sink coupling all as specified and directed.

S&F in repair sink cock fancy type all as per Cat Part No. FLR-CHR-5347N of make - JAQUAR (or Equvalent in other makes) with 215 mm swivel spout complete all as specified and as directed.

S&F in repair stainless steel Towel Rack with lower hanger, fixed with screws, complete all as per Cat Part No. AHS-1581H of make - JAQUAR or Equvalent in other makes, all as specified and as directed.

Supply and fixed PVC Cabinet of size 600 x 450 x125 mm with mirror at top, all as specified.

S&F in repair Brass chromium plated shower rose 125mm all as per Cat Part No. OHS-CHR-1719 of make - JAQUAR (or Equvalent in other makes), with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directed.

S&F in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange all as per Cat Part No. SHA-CHR- 483 FTK of make - JAQUAR or Equvalent in other makes

S&F in repairs PVC connection 15mm size with PTMT nut of length 600mm etc complete all as specified and as directed .

S&F of 32/40mm waste pipe for wash hand basin and sink all as specified and as directed

S&F in repair CP towel rail 600 mm long all as per Cat Part No. AKP-CHR- 35711PS of make - JAQUAR (or Equvalent in other makes), fixed with chromium plated brass screws and wooden /plastic cleats, complete all as specified and directed.

S&F corner glass shelf 150mm X 150mm with chromium plated assembly and fixed with Chromium plated brass screws and wooden/plastic cleats, all as per Cat part No. ACN-CHR- 1173 of make - JAQUAR (or Equvalent in other makes), complete all as specified and as directed.

S&F Corner glass shelf large, 300x300mm with chromium plated assembly and fixed with Chromium plated brass screws and wooden/plastic cleats, all as per Cat part No. ACN-CHR- 1173N of make - JAQUAR (or Equvalent in other makes) complete all as specified and as directed.

S&F glass shelf of size 12 cm wide x 60cm long for wash hand basin, all as per Cat part No. ACN- 1171N of make - JAQUAR (or Equvalent in other makes) complete all as specified and as directed.

S&F CP Towel ring all as per Cat Part No. ACN-CHR- 1121BN of make -JAQUAR (or Equvalent in other makes), fixed with and including Chromium plated brass screws and wooden/plastic cleats, all as specified and as directed.

S&F Stainless steel Soap dish all as per Cat Part No. ACN-CHR- 1131N of make - JAQUAR (or Equvalent in other makes), fix to wal, l all as directed and specified.

S&F in repair brass Chromium Plated Health faucet with 1.20m long flexible pipe and wall hook all as per Cat Part No. ALD-CHR- 587 of make - JAQUAR (or Equvalent in other makes), complete all as specified and directed.

S&F Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr complete all as specified & directed.

Supply and Fixing Stainless steel Toilet paper holder, all as per Cat Part No. AKP 35753P of mka - Jaguar or equivalent in other makes, all as specified and directed.

S&F in repair Brass chromium plated bottle traps 32 mm for wash basins and urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed complete all as specified and directed.

S&F PVC floor trap 75mm dia, including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified & directed.

S&F 110 mm dia PVC(SWR) Pipes single soketed, in any length with rubber ring joints, laid in trenches or in floors and walls including taking down old pipes, complete all as specified & directed.

S&F PVC (SWR) bends 110 mm dia in any radius with access door etc complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm single socketedwith in any length with rubber ring joints, laid in trenches or in floors and walls including taking down old pipes, complete all as specified and directed.

S&F PVC (SWR) bends 75 mm dia in any radius with access door etc, complete all as specified & directed.

S&F PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc, complete all as specified & directed.

S&F Chromium Plated grating size 100mm fixed with white cement all as specified & directed.

S&F rotational moulded polyethylene water storage tank three layered, 1000 ltr capacity including threaded type cover hoisted and fixed in position all as specified in SSR Pt - I, including dismantling and taking down old unserviceable tank, all as specified and directed.

S&F in repair 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass in repair complete all as specified & directed.

S&F in repair PTMT Nipple 25 mm suitable for HDPE water tank. (Minimum weight 25mm- 65gms) complete all as specified & directed.

S&F in repair PTMT Nipple 20 mm suitable for HDPE water tank. (Minimum weight 20mm- 45gms ) complete all as specified complete all as specified & directed.

S& F for aluminium powder coated drapery rod 32mm dia fixed with suitable bracket complete. (Note: Bracket will be measured and paid separately) complete all as specified and directed.

S& F aluminium powder coated fancy type suitabe brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks of 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws including necesary drilling & finished with polishing, (Each opening shall have two fillets at both ends), complete all as specified and directed.

M&L for factory made WPC single extruded board of 18 mm thick pre laminated shutter for kitchen cabinet, cupboard and prelaminated side with different design and other side plain wihte of density not less than 600kg/cum, board should be 100% lead free, water proof, termite proof and moisture/weather proof and good screw holding capacity and complete all as specified & directed.

S&F Stainless Steel (Grade 304) Kitchen Basket, 48 cm x 50 cm x 10 cm, complete all as specified and directed.

S&F Stainless Steel (Grade 304) Kitchen Basket, 48 cm x 50 cm x 15 cm complete all as specified and directed.

S&F Stainless Steel (Grade 304) Kitchen Basket, 48 cm x 50 cm x 20cm complete all as specified and directed.

S&F for stainless steel D type rounded type drawer wardrope handle of size 200 mm long, complete all as specified and as direcated.

S&F for stainless steel D type Square type wardrope/door handle size 300 mm long complete all as specified and as direcated.

M & L for stainless steel size 1000/900mm x 40mm x 40 mm ovel type hanging rod with end brackets for cupboard (Wt not less than 370 gms) complete all as specified and as direcated.

S&F for 600 mm long telescopic channels, rollers for smooth sliding of drawers complete all as specified and directed.

S&F Auto closing hinges 35mm of 0 crank for kitchen cabinet & cupboard, complete all as specified and directed.

M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ thickness of slab below100mm, all as specified and directed. .

Demolition of cement concrete in ground floor and pavings not exceeding 15cm thickness (below or above ground level), all as specified and directed. .

Demolition of brick work or stone masonry built in cement mortar including all quions, all as specified & directed.

Demolition of reinforcrd cement concrete in ground floor and pavings in any description and in any position all as specified and directed.

Removing building materials to a distance above 2 KM , beyond the MOD land lead included in the rates, including loading, unloading and stacking at the loading, unloading and stacking at the destination (Note: One metric tone of load shall be measured as one load)

S&F for pully operated clothes drying system, 6 feet long (with 4 pipes) consisting of four anodized aluminium pipes each of outer dia 22mm and inner dia 19.80 mm and pully made up of derlin with rope guide mounted on channel pair of length 60cm(diatance between two pipes is adjustable) and locking system to hide rope knot, channel to be mounted of fixed with self tapping screws provided with kit rope will be polyster braided undyed of 3.5 mm dia, all as specifiedd and directed.

M&L Examining concrete by tapping with light hammer and marking of the loose concrete areas of structural elements in straight line geometrical forms, grooving the edges same with grinder upto 5 -10 mm depth without damaging existing rebar’s, carefully removing unsound weak/ loose concrete/ cover & concrete around the rebar’s upto 10 mm depth by low impact high frequency hammer/ chipper without damaging the sound concrete, daily cleaning and stacking of debris at prescribed location in polypropylene/ paper bags, disposing off the debris so generated on weekly basis outside the premises, etc, complete all as specified and directed necessary scoff -folding complete all as specified and directed

M&L for cleaning existing reinforcement with wire brush/rotary wire brush to make surface free from rust scales, loose material, dirt etc complete and applying two coats of alkaline rust converting primer Rust Off 100 (make - Sika) or Rearm Rust Remover (make - Dr Fixit) or Rust remover WD-40 (make - Pidilite) with brush on the existing rebar for complete wetting of rusted metal surface and allowed to react it for 16-24 hours. After 24 hours, a white layer will appear which will protect further corrosion of metal / steel for about 5-7 days including surface preparation. Before applying protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth, complete all as specified and as directed. Note: Work to be executed by the authorized applicator of manufacturer.

M&L Providing and Application as passivator / Anti corrosion coating to the steel reinforcement shall be applied The material shall be two component ,cement based polymer modified two component coating for corrosion protection. The material shall be prepacked and ready to use. It shall be fully compatible with the reinstatement methods adopted complete all as specified and as directed by Engr-in-charge. This shall include surface preparation and erection of steel props as required for the application. complete all as specified and directed. (Make : Friazinc/Arm Coat ZP/Cici Zink-O-Prime) Note: Work to be executed by the authorized applicator of manufacturer only.

M&L of two component solvent free epoxy bonding agent for bonding old to new concrete . The ready to use epoxy bonding agent shall be applied over old concrete using brush after cleaning of surface of all dust or laitance. The material is supplied as a two part material in pre weighed quantities for ready onsite mixing and use. The material shall exhibits the following properties Compressive strength 50 N/mm2 at 7D Flexural strength 35N/mms at 7 D , Shear strength ION/mm2 at 7D and Tensile strength 20 N/mm2 and Bond Strength of ION/mm2.The new concrete shall be placed within the open time as specified by the manufacturer to ensure maximum bonding and application shall be as per the manufacturer instruction , complete all as specified and as directed. (Make :Sika Dur 32LP/Rearm Super bond/Cico bond EPO) Note: Work to be executed by the authorized applicator of manufacturer.

Rebuilding the section of damaged RCC elements to its original size in thickness of 25mm by hand or spray application by Providing and applying Sika MonoTop@- 122F single component, fibre reinforced, sulphate resistant, low shrinkage, high performance cementations structural repair mortar or by micro concreting in the ratio of 1:2:4 added with water proofing admixture as specified or directed by engineer in charge. Note: Work to be executed by the authorized applicator of manufacturer

Taking down unserviceable wire carefully copper/ aluminum point wiring (light, fan,bell, socket or power) complete including fittings such as switches, ceiling roses, regulators, sockets, light fittings, fans etc., and making good the disturbed surfaces of walls, ceiling etc., including painting with same colour of the background, complete all as specified and as directed.

M&L for point wiring complete with 1.5 Sqmm (nominal cross sectional area) single core PVC insulated heavy duty ISI marked unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including new PVC concaled conduit in existing brick /stone wall for concealing conduit and provision of PVC insulated heavy duty ISI marked unsheathed copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly for One Light point controlled by one switch, all as specified & directed. Note : Cutting chases, pinning in, making good etc for concealed wiring is included in quoted rate.

M&L for point wiring complete with 1.5 Sqmm (nominal cross sectional area) single core PVC insulated heavy duty ISI marked unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including new PVC concaled conduit in existing brick /stone wall for concealing conduit and provision of PVC insulated heavy duty ISI marked unsheathed copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly for One fan point controlled by one switch, all as specified & directed. Note : Cutting chases, pinning in, making good etc for concealed wiring is included in quoted rate.

M&L for point wiring complete with 1.5 Sqmm (nominal cross sectional area) single core PVC insulated heavy duty ISI marked unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including new PVC concaled conduit in existing brick /stone wall for concealing conduit and provision of PVC insulated heavy duty ISI marked unsheathed copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly for One Exhaust fan point controlled by one switch, all as specified & directed. Note : Cutting chases, pinning in, making good etc for concealed wiring is included in quoted rate.

M&L for point wiring complete with 1.5 Sqmm (nominal cross sectional area)single core PVC insulated heavy duty ISI marked unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including new PVC concaled conduit in existing brick /stone wall for concealing conduit and provision of PVC insulated heavy duty ISI marked unsheathed copper conductor ,1.5 sqmm for earth continuity conductor and connected to common earth dolly for One 5 Amps socket point on same board with other switches, all as specified & directed. Note : Cutting chases, pinning in, making good etc for concealed wiring is included in quoted rate.

M&L for point wiring complete with 1.5 Sqmm (nominal cross sectional area) single core PVC insulated heavy duty ISI marked unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including new PVC concaled conduit in existing brick /stone wall for concealing conduit and provision of PVC insulated heavy duty ISI marked unsheathed copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly for One call bell point controlled by one bell push, all as specified & directed. Note : Cutting chases, pinning in, making good etc for concealed wiring is included in quoted rate.

M&L for point wiring complete with 2.5 Sqmm (nominal cross sectional area) single core PVC insulated heavy duty ISI marked unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including new PVC concaled conduit in existing brick /stone wall for concealing conduit and provision of PVC insulated heavy duty ISI marked unsheathed copper conductor, 2.5 sqmm for earth continuity conductor and connected to common earth dolly for 5/15A socket multipurpose on independent board, all as specified & directed. Note : Cutting chases, pinning in, making good etc for concealed wiring is included in quoted rate.

Supply and Fixing in repair Modular Switch 1 way 6 Amps 1 Module, complete all as specified & directed.

Supply and Fixing in repair Modular Socket,6 Amps- 2/3 pin combined 2 Moduler, complete all as specified & directed.

Supply and Fixing in repair Modular Switch 1 way 16 Amps 1 Moduler, complete all as specified & directed.

Supply and Fixing in repair Modular Socket, 6 A/16A,2 Moduler, complete all as specified & directed.

Supply and Fixing in repair Modular bell push 6A, 1 Module, complete all as specified & directed.

Supply and Fixing in repair Modular type Fan step regulator 120W type 2 moduler, complete all as specified & directed.

Supply and Fixing in repair PVC ceiling rose two to three terminals, complete all as specified & directed.

Supply and Fixing in repair ding dong bell AC, 230 volts, single pole, complete all as specified & directed.

Supply and Fixing in repairs LED Tube light fitting 1 x20 W, 4 feet ,220V housing with PC diffuser box type with driver,holder including LED tube light connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal, complete all as specified & directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

Supply and Fixing in repairs MCB DB SPN 8 way, Double door, 240 V, AC, 50 Hz, with 200Amp rated bus bar including dismantling existing one, complete all as specified and as directed.

Supply and fixing in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning including dismantling existing one, complete all as specified and as directed.

Supply and fixing in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and neutral current carrying capacity 40 Amp, in the MCB DB Complete with connection testing and commissioning including dismantling existing one, complete all as specified and as directed.

Taking down existing ceiling fan of any size, Painting of ceiling fans complete, with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc, Including writing MES No, complete all as specified and as directed.

Hanging Only Ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan all as specified, and any addn/alteration /threading if required to down rod shall be done by contractor with out any extra cost, complete all as specified and as directed.

M&L for taking down existing exhaust fan 300 mm sweep, cleaning properly, filing the cavity with filler and Painting with synthetic enamel paint by spraying mechanically, Including writing MES No and fixing the fan with new cable from ceiling rose/connector to fan, complete all as specified and as directed.

Fixing only exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan, complete all as specified and as directed.

Supply and fixing in repair LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete all as specified and as directed.

Supply and fix in repair white cover plate with frame 1 module, complete all as specified and as directed.

Supply and fix in repair white cover plate with frame 2 module, complete all as specified and as directed.

Supply and fix in repair white cover plate with frame 3 module, complete all as specified and as directed.

Supply and fix in repair white cover plate with frame 4 module, complete all as specified and as directed.

Supply and fix in repair white cover plate with frame 8 module, complete all as specified and as directed.

Supply and fix in repair modular metal flush box 1/2 module, complete all as specified and as directed.

Supply and fix in repair modular metal flush box 3 module, complete all as specified and as directed.

Supply and fix in repair modular metal flush box 4 module, complete all as specified and as directed.

Supply and fix in repair modular metal flush box 8 module, complete all as specified and as directed.

EURO ENTERPRISES (BID ID -3168044)

chowdeshwariconstructionco (BID ID -3171040)

M/s Sri Chakrapani Constructions (BID ID -3175900)

Moulya Builders (BID ID -3175108)