Repair/ maint to flooring, joinery, roof sheet, false ceiling and connected misc work at Zone C area at Old Cantt Allahabad.

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding & backing complete and removing of rubbish from site complete all as specified & directed.

Material & Labour for Non Skid Jointless ceramic light coloured tiles 7-8mm thick [premium quality] (square or rectangular) area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm, laid in floors set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles over & including 15 mm thick Screed bed or bedding layer in cement sand mortar in 1:6 for laying of ceramic tiles complete all as specified & directed.

All as per serial item Number 2 but as in vertical surface like skirting / dado or risers of steps laid over 10 mm thick rendering or backing layer in cement mortar 1:4 --- ditto ---- complete.

Material & Labour for Glazed ceramic coloured tiles [premium quality] as in vertical surface of walls such as skirting / dado and risers to steps, size of tile 450x300mmx7mmm or 350x250x7mm thick set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles over & including 10 mm thick rendering as in backing of tiles in cement mortar in 1:4 complete all as specified & directed.

Material & Labour for Homogeneous Vitrified digital double charge tiles 10 mm thick Light shade (square or rectangular) polished, area of each tiles not exceeding 0.36 Sqm each as in floors set and jointed with Balendura adhesive or equivalent as approved by GE and pointed in white cement mixed with colouring pigment to match the shade or colour of tiles laid over and including 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified & directed. Make : Marbonite (Series-2) of M/s H R Jonson or Kajaria or as approved.

All as per serial item Number 5 but as in vertical surface like skirting / dado or risers of steps laid over 10 mm thick rendering or backing layer in cement mortar 1:4 --- ditto ---- complete.

Material & Labour for exterior out door designer floor tiles 10 mm thick of size 300x300 mm or 400x400 mm as in floors set and jointed with Balendura adhesive or equivalent as approved by GE and pointed in white cement mixed with colouring pigment to match the shade or colour of tiles laid over and including 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified & directed. Make : Endura of M/s H R Jonson or Kajaria or as approved.

Material & Labour for cement concrete checquered tiles [best quality] of size 250 mm x 250 mm x 25 mm thick as in floors set and jointed in neat cement slurry and pointed with white cement mixed with colouring pigment to match the colour or shade of tiles laid over & including 20 mm thick Screed bed or bedding layer in cement sand mortar in 1:6 for laying of ceramic tiles complete all specified & directed.

Demolition of Cement Concrete work [Un-reinforced] in ground floors or paving not exceeding 15 cm thickness and removing rubbish from site as directed by Engineer-in-Charge.

Material & Labour for 75mm thick cement concrete 1:4:8 type D-2 using 40mm crushed stone aggregate as in sub base to floors / paving or as plinth protection finished even & smooth with-out using extra cement complete all as specified & directed.

Material & Labour for 75mm thick cement concrete 1:3:6 type C-1 using 20mm crushed stone aggregate as in paving or plinth protection finished even & smooth with-out using extra cement and making 12 mm wide joints filled with mixer of bitumen & sand in 1:3 in full depth at every 3 m length or change of direction complete all as specified & directed.

Dismantling of Asbestos cement (corrugated or semi corrugated) sheets as in roof coverings including ridges complete all as specified & directed.

Material & labour in repair mild steel framed work such as in roof truss purlins, rails and fastening and heavy brackets fabricated framing beam, tee, angle iron or channel or flat iron including distance peices, cleats of MS sheet including cutting welding rivetting, nut bolt & washers & similar work including taking out old any section complete all specified & directed.

Supply & Fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based corrugated steel sheet 0.50mm thick, coloured having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws at every alternate corrugation complete all specified & directed.

Supply & Fixing in repair Suspended false ceiling using E-board of Make : Everest or equivalent make approved design "Lake & Hill" of size of grid 605mm x 605mm x 4 mm thick white pre-laminated self embosed, texture designed board, water resistant, fire resistant & termite resistant for Insulation and accoustic purpose to be placed on at any height on hot dipped galvanised iron imposed grid with 24 mm wide T section powder coated, the frame work shall comprises of main runner made with 0.35 mm thick GS sheet and of size 24x32x300mm spaced at 1200 mm maximum centre to centre fixed to structral soffits with hangers of 4 mm dia GI wire to be fixed with rawl plugs, adjusted with screws, flush fittings of 1200 mm long cross Tee with double stiching to be interlocked between main runners at 600 mm c/c from cross Tee more than 600 mm to be suported independently and double to be formed by fittings 600 mm long cross tee centrally between the 1200 mm cross tee, perimeter wall angle shall be of 0.45 mm thick GS sheet of size 19x19 mm and 300 mm long of white colour including making hole in board for provison of light fittings complete all as per manufacturer Instructions & as directed. Make : Armstrong or Ramco Industries or as approved by GE.

Material & Labour for pre cast cement concrete 1:2:4 type B-1 using 20mm crushed stone aggregate as in man hole cover or drain cover, shelves or similar works including necessary form work and cover slab setting in cement mortar in 1:4 complete all specified & directed.

Material & Labour mild steel TMT bars 8-10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & directed.

Material & Labour 18-20mm thick machine cut Green Marble stone slab as in kitchen top of kitchen platform laid over and including cement screed bed or bedding layer 20mm thick in CM 1:4 laid and jointed with white cement mixed with colouring pigment to match the colour of stone slab including making nosing or rounding the outer edge of stone by grinding & rubbing to achived mirror polishing including taking out old damaged stone any type complete specified & directed.

Demolition of brick work built in cement & sand mortar including all quoin, arches, pillars etc & removing rubbish from site complete all as specified & directed.

Material & Labour for brick work with fly ash bricks [crushing strength not less than 75 Kg per Sqcm] straight or curved on plan exceeding 6 m mean radius built in cement sand mortar 1:6 complete all as specified & directed.

Material & Labour for brick work in half brick thick wall with fly ash bricks [crushing strength not less than 75 Kg per Sqcm] built in cement sand mortar 1:4 complete all as specified & directed.

Taking down cement plaster on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish off the premises complete all as specified & as directed.

Material & Labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement sand mortar 1:6, finished surface even and smooth without using extra cement complete all as specified & directed.

Material & Labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement sand mortar 1:4, finished surface even and smooth without using extra cement complete all as specified & directed.

Material & Labour for 10 mm thick rendering on ceilling surfaces in cement sand mortar 1:4, finished surface even and smooth without using extra cement complete all as specified & directed.

Material & labour for three coats of white wash on newly plastered surface of ceilings after preparation of new plastered surface complete all as specified & directed.

Material & Labour for preparation of new plastered surface of walls and rubbing with sand or emery paper and than apply two coats of cement base paint on wall surfaces of approved colour complete all as specified & directed.

Material & Labour for preparation of new plastered surface of walls and rubbing with sand or emery paper and primed with cement primer and than apply two coats of Oil bound distemper [Acrylic] on wall surfaces of approved colour complete all as specified & directed.

Supply, hoisted & fixing in positon in repair 500 Litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) including necessary connections to inlet outlet & wash out pipes, one number 20 mm float valve of PTMT complete all as specified in SSR Part-I complete all as specified & directed.

Supply, hoisted & fixing in positon in repair 1000 Litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) including necessary connections to inlet outlet & wash out pipes, one number 20 mm float valve of PTMT complete all as specified in SSR Part-I complete all as specified & directed.

Supply & fixing in repair 15 mm bore gun metal gate valve with iron wheel head screwed both ends complete all as specified & directed.

Taking out old rusted or damaged 15 mm bore galvanised steel water tubing & connections for cleaning or re-fixing if required complete all as specified & as directed.

Taking out old rusted or damaged 20 mm bore galvanised steel water tubing & connections for cleaning or re-fixing if required complete all as specified & as directed.

Supply & Fixing 15 mm bore galvanised steel water tubing medium grade for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed.

Supply & Fixing 15 mm bore galvanised steel water tubing [Except water tubing] for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed.

Supply & Fixing 20 mm bore galvanised steel water tubing medium grade for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed.

Supply & Fixing 20 mm bore galvanised steel water tubing [Except water tubing] for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc, and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed.

Supply & Fixing in repair vitreous china wash hand basin white flat back of size 550x400mm including chain & plug and porcelain stopper but including angle iron brackets, PVC waste pipe, chromium plated waste coupling 32 mm dia long shank complete as specified & directed.

Supply & Fixing in repair 15mm bore Pillar tap cast copper alloy fancy type swan neck type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified & directed.

Supply & Fixing in repair sink with out drainage board made of stainless steel 1 mm thick sheet with plugs, washer, waste pipe 40 mm bore 600 mm long or CP waste coupling 40 mm bore, rest on steel brackets or on dwarf wall overall size 495 mm x 420 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified & directed.

Supply & Fixing in repair PVC SWR floor / nahani trap 75 mm dia of out let plain with CP grating jointing with cement solvant or adhesive and fixed with PCC 1:2:4 using 20 mm stone aggregate complete all as specified & directed.

Supply & Fixing in repair vitreous china squatting pan white orissa pattern of size 580 x 440 mm with Integral foot rest (excludig flushing cistern & flush pipe) with VC trap and make good to match with the existing surface of floor complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repair vitreous china water closet pedestal pattern (excluding flushing cistern & flush pipe) and making good to match with the existing surface of floor including PVC white colour plastic seat cover with steel pin hing fixed complete all as specified & directed.

Supply & Fixing 10 litre capacity PVC valveless syphonic action type low level flushing cistern white colour including 32 mm bore flush pipe, cantilever brackets PVC ball valve, float and PVC handle, PVC connection 15mm dia 450 mm long complete all as specified & directed.

Material & Labour 100 mm round chromium plated steel grating with or without centre hole fixed with adhesive or cementy solvant complete all as specified & directed.

Supply & Fixing in repair 15mm bore bib tap cast copper alloy fancy type chromium plated with capstan head handle screwed down for iron pipes or for brass ferrule complete all as specified & directed.

Supply & Fixing in repair 15mm bore bib tap long body cast copper alloy fancy type chromium plated with capstan head handle screwed down for iron pipes or for brass ferrule complete all as specified & directed.

Supply & Fixing in repair 15 mm bore Angle Valves brass chromium plated screwed down high pressure with capstan head handle screwed both ends for iron pipe or for unions complete all as specified & directed.

Supply & Fixing in repair 15mm bore stop valves chromium palted cast copper alloy screwed down high pressure with capstan headed handle fancy type, screwed both ends for securing iron pipe or for union complete all as specified & directed.

Supply & Fixing in repair chromium plated shower rose fancy type with swivel joints fixed to 15mm bore pipe complete all as specified & as directed.

Supply & Fixing in repair 600 mm long 20 mm dia "D" type chromium plated tubular towel rail between flanges fixed with steel screws complete all as specified & directed.

Material & Labour for cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in levelling course, roof kerbs, coping, benching, mud stops or chamfered edges or similar works including necessary form work if required complete all as specified & directed.

Taking down chowket or frame with shutter (without taking off shutters from the frame) area not exceeding 1.5 Sqm each complete all as specified & directed.

Taking down chowket or frame with shutter (without taking off shutters from the frame) area exceeding 1.5 Sqm & not exceeding 4.0 Sqm each complete all as specified & directed.

Taking down shutters area not exceeding 2.0 Sqm each complete all as specified & directed.

Taking down shutters area exceeding 1.0 Sqm & not exceeding 2.0 Sqm each complete all as specified & directed.

Material & labour mild steel framed work such as angle iron door frame; grills, gratings with ends of bars shouldered and or riveted, or forged into spikes; framed guard bars, railings, hold fasts & similar work complete all as specified & directed.

Material & Labour for PCC 1:3:6 type C-1 using 20mm crushed stone aggregate as in fixing of hold fast including necessary form work finished surface even & fair complete all as specified & directed.

Material & Labour for second class hard wood [SAL] plain solid straight in chowkhats of door frame wrought framed rebated on the solid rounded or chamfered edges put together with glue or wooden pins at joints complete all as specified & directed.

Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet reinforced with MS square tube complete all as specified & directed.

Material & Labour for 30 mm thick Factory made PVC solid panel door shutter (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and Plain colour PVC sheet for top & bottom rail, lock rail & bottom rail on either side and as gap insert for top & bottom rail; penelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified & directed.

Supply & Fixng 30 mm thick flush door shutters, kiln seasoned ASCU treated, solid core construction, with block board core and ply wood face panels, commercial type ply on both faces complete all as specifed & directed.

Supply & Fixing 35 mm thick second class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass / gauze etc divided into squares or rectangluar with plain, chamfered or rounded mitered edge beads for securing glass/ gauge complete all as specified in SSR Part 1-1991 section 8 clause 8.20 (a) complete all as specified & directed.

Supply & Fixng 18 mm thick pre-laminated particle block board exterior grade pre laminated one side with decorative choice lamination and other side balancing white lamination fixed wtih screw as in cup board shutter & shelves complete all as specifed & directed.

Material & labour mild steel framed work such as grills, gratings with ends of bars shouldered and or riveted, or forged into spikes; framed guard bars, railings, hold fasts & similar work complete all as specified & directed.

Supply & Fixing steel window factory made with side hung shutter including box type hinges with steel handle, steel peg stay, complete with glazing bars, dovetailed or welded joint complete all as specified & directed.

Supply & Fixing steel window factory made with side hung shutter including box type hinges with steel handle, steel peg stay, complete with out glazing bars, dovetailed or welded joint complete all as specified & directed.

Supply & Fixing steel ventilator factory made with top hung shutter including hinges with steel handle, steel peg stay, dovetailed or welded joint complete all as specified & directed.

Supply & Fixing 100mm long mild steel butt hinges medium weight cold rolled with steel pin hinge and fixed with steel screws complete all as specified & directed.

Supply & Fixing 100mm long stainless steel butt hinges with steel pin hinge type B-21 and fixed with steel screws complete all as specified & directed.

Supply & Fixing 150mm long extruded aluminium anodised alloy handle cast type and fixed with screws complete all as specified & directed.

Supply & Fixing 200mm long extruded aluminium anodise alloy barrel tower bolt fixed with screws complete all as specified & directed.

Supply & Fixing aluminium alloy anodized sliding door bolt with hasp & staple (clip & bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm long complete all as specified & directed.

Supply & Fixing 200 mm long mild steel, ordinary rat tail rod pattern door spring including roller and roller plate fixed on door with screws complete all as specified & directed.

Supply & Fixing 150mm size aluminium hasp staple safety type including bolt to hinges plate and fixed with screws complete all as specified & directed.

Supply & Fixing contineous piano hinges mild steel bright finished or electrogalvanised pin hinges fixed with screws on cup board shutter width of flap when open 30 mm complete all as specified & directed.

Supply & Fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with tinned tacks or galvanised wire staples complete as specified & directed.

Supply & Fixing in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with tinned tacks or galvanised wire staples including taking out old damaged wire cloth any type complete as specified & directed.

Supply & Fixing 3mm thick sheet glass plain ordinary quality and glazing with oil putty in a square not exceeding 0.5 Sqm in each pane complete all as specified & directed.

Supply & Fixing in repair 3mm thick sheet glass plain ordinary quality and glazing with oil putty in a square not exceeding 0.5 Sqm in each pane including taking out glass from frame and removing from site complete all as specified & directed.

Material & Labour for preperation of new wood or wooden based surface with sand or emery paper of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & directed.

Material & Labour for preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed.

Supply & Fixing in repair 25 mm dia fancy type draphery or curtain rods PVC coating with ends brackets decorative type cut to length as required size, colour coating including matching socketed brackets with PVC rings [eight numbers in each RM] complete all as specified & as directed.

Supply & Fixing in repair brass chromium plated bottle trap 32mm bore for wash hand basin with inlet & outlet screwed for pipes or connection including necessary packing union and cap complete all as specified & directed.

Supply & Fixing PVC connection 15mm size with PTMT nuts on both ends of length 450mm complete all as specified & directed.

Taking down old loose plaster form edges or bottom of chajjas or corner where steel reinforcement are visible and cleaned the entire surface with water and apply neat cement slurry on entire surface of chajjas or on open steel reinforcement binding with steel wire and material & labour rendering with cement sand mortar in 1:3 including necessary form work or scafolding if required to entire satisfaction of Engineer-in-Charge complete all as specified & directed. Note : Necessary steel wire & form work or scafolding if required shall be made by contractor included in quoted rate.

Supply & Fixing in repair steel hinges 100 mm fixed with screws on doors or modular kitchen door complete all as specified & directed.

Supply & Fixing in repair 100mm long steel handle fancy type fixed with screws on doors or modular kitchen door complete all as specified & directed.

Supply & Fixing in repair powder coated [50 micron thick] aluminium door frame with shutter having with door frame of section 62.5x44x2.5 mm thick & shutter with bottom & middle rail of section 112.5x44x2.5 mm thick and styles & top rail of section 83x44x2.5 mm thick with central locking arrangement with & including mortice handle lock of make of Godrej or Link having seven lever and self closing device [Floor door spring by cutting of floor of Sandhu make] with rebate including jointing cleats, fixing builder hardware fittings and glazing with 5.5 mm thick ordinary plain glass including aluminium snap beading & rubber packing and necessary fittings, fixtures complete all as specified & directed.

Supply & Fixing in repair powder coated aluminium window [Sliding type], frame of aluminium section 62.5x37x1.5 mm thick & shutter having styles & rails of section 47.5x44.45x1.5 mm thick including jointing cleats, glazing clips, rubber packing, aluminium snap beading, steel screws, aluminium anodised fitings such as 100 mm buttt hinges, 150 mm tower bolt, 150 mm handle including 5.5 mm thick ordinary plain glass including providing & fixing aluminium checquered grill of anodised section of size 100x100 [diagonally] of 8 mm dia die cast fixed to frame 20x20x5 mm aluminium flat with screws and also including stainless steel wire cloth of 0.36 mm nominal dia of wire and average aparture 1.4 mm complete all as specified & directed.

Supply & Fixing in repair powder coated aluminium checquered grill of anodised section of size 100x100 [diagonally] of 8 mm dia die cast fixed to frame 20x20x5 mm aluminium flat with screws and also including stainless steel wire cloth of 0.36 mm nominal dia of wire and average aparture 1.4 mm complete all as specified & directed.

Shivagya Engineering

A C GUPTA

AMARDEEP ENTERPRISES

M/S Satyam Associates

M/S Akhilesh Enterprises

M/s Radhika Enterprises