RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Class Room Desking/Seating ( 1000 pieces ) Technical Specifications 1/4 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC TYPE OF DESKING INTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK INTEGRATED DESK CUM SEATING
RequiredINTEGRATED DESK CUM SEATING WITH SHELF/STORAGE UNDER DESK Desking Configuration TWO SEATER TWO SEATER Length of Desking
RequiredSeating and Backrest (if provided) in mm (±10 mm) 920 1000
Required920 DESK/BENCH SPECIFICATIONS Material of Desk Top +/- 2 mm (For shelf storage +/- 4 mm) 18 mm thick prelaminated Particle Board 18 mm thick pre- laminated Particle Board of E1-P2 grade
Required18 mm thick prelaminated Particle Board Material of Support Structure or Side Pannel Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm Mild steel pipe of 37.5 mm dia and wall thickness of 18 gauge.
RequiredMild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm Height of Desk Top in mm (±5 mm) 750 * Width of Desk Top in mm (± 5 mm) 380 * SEATING SPECIFICATION Material of Seat and Backrest (if provided) (+/- 2 mm (For back rest +/- 4 mm) 18 mm thick prelaminated Particle Board 18 mm thick pre- laminated twin board of exterior grade.
Required18 mm thick prelaminated Particle Board Material of Support Structure Mild Steel square Section of size 25x25 mm and wall thickness minimum 1.6 mm * Material of Seat Cushion WITHOUT CUSHION WITHOUT CUSHION Width of Seating in mm (±10 mm) 340 * Height of Seat in mm (±10 mm) 440 * Width of backrest if 220 * 2/4 provided in mm (± 5 mm) Back Support for Seating of Same materail as Seating Provided without cushion Provided without cushion MISC DESIGN AS PER DGS&D drawing No DQA/GE/RC -208/Schedule 19 (DRG 1
Required2
Required3
Required4
Required5
Required6
Required7
Required8
Required9
Required10) Can be configured as per buyer's choice within offered technical details * Colour of finish As per buyer's choice * Desk top finishing NA * Distance between Tabletop edge and Seat edge in mm (+/- 5 mm) NA * WARRANTY Warranty period in number of years 2 1
Required2 * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents GeM/DGsnd Drawing document https:/mkp.gem.gov.in/uploaded_documents/cms/tp/home_furn_clas _gene_cl23325325/51/16/877/CategorySchema/gem_dgsnd_drawing _document/2018/11/19/dwg-integrated_2018-11-19-16-20-08_9c045 9e83eed24ec38425b68703357aa.pdf