Construction of BC Crematorium Shed at Perambur village in Kunnam Panchayat in Kollidam Block Mayiladuthurai District Under MPLADS 2025-2026

1.Construction of BC Crematorium Shed @ Perambur village in Kunnam Panchayat

Earthwork excavation in all classes of soils and depositing on bank with an initial lead and lift such as sand or other loose soil, wet sand not under water silt and ordinary soil, sandy loom, and hard stiff, black cotton soil, red earth, etc , complete

Sand filling in foundation and for sand soling in road for sub base course with good river sand including cost and conveyance and all labour charges etc.,

C.C 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying, Compacting and watering etc., complete.

RCC 1:1:5:3 mix using 20mm ISS size HBG metal from approved Quarry, including cost and conveyance of materials to worksite including labour for mixing, laying, watering within 200m lead for good water, compacting the concrete including all labour for formin

BRICK WORK in cm 1:5 mix using country bricks of size 8 3/4’’ x 4 1/4”x 2 1/4’’ including cost and conveyance of materials top site including all labour for mixing mortor and all other incidental charges etc., complete

Supplying and Erecting of centing including cost and conveyance of steels from Godown to worksite including labour for cutting, joining and welding is necessary including labour for dying with binding wire and labour for placing in position and directed

CC 1:3:6 mix using 20mm ISS size HBG metal from approved Quarry, including cost and conveyance of materials to worksite including labour for mixing, laying, watering within 200m lead for good water, compacting the concrete including all labour for forming formwork etc., complete.

Supplying and fabrication of steel including cost and conveyance of steels from Godown to worksite including labour for cutting, joining and welding is necessary including labour for dying with binding wire and labour for placing in position and directed

CC 1:2:4 mix using 20mm ISS size HBG metal from approved Quarry, including cost and conveyance of materials to worksite including labour for mixing, laying, watering within 200m lead for good water, compacting the concrete including all labour for forming formwork etc., complete.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Plastering with cement mortar 1:5 to 12mm thick including cost and conveyance of all materials to work site and all labour for watering, curing and all leads for good water including cost of form work and all labour and all other incidental charges etc.,

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Provision for Name Board Charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}