DEVELOPMENT OF DISTRIBUTION INFRASTRUCTURE IN ELECTRIC DIVISION-3RD, SRINAGAR OF JAMMU AND KASHMIR UNDER REVAMPED REFORMS-BASED AND RESULTS-LINKED, DISTRIBUTION SECTOR SCHEME (RDSS)

Amount

Item Description

11 M long Steel Tubular poles with welded steel base plate 300x300x8mm of Designation 410 SP -56 as per IS 2713 amended upto date along with 75x40x5mm GI channel for earthing arrangement & Pole marking

9 M long Steel Tubular poles with welded steel base plate 300x300x8mm of Designation 410 SP 33 as per IS 2713 amended upto date along with 75x40x5mm GI channel for earthing arrangement & Pole marking

8 M long Steel Tubular poles with welded steel base plate 300x300x8mm of Designation 410 SP 15 as per IS 2713 amended upto date along with 75x40x5mm channel for earthing arrangement & pole marking

Pre-fabricated steel items (Galvanised) like V cross arm,Cantiliver cross arm wherever rquired , top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, guarding channels, back clamp,

Transformer mounting structure etc made of GI Channels, GI angle, GI flats of given sizes for over head structures .

ACSR Conductor (50 mm²) - Rabbit

ACSR Conductor (100 mm²) - Dog

11kV Polymeric composite Pin Insulator with Pin 12kV, 5kN

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN with fittings

Galvanised Nuts, Bolts with Washers.

Anticlimbing devices as GI Barbed wire with Clamps (3.5 Mtr, 2.5mm Dia, (12 swg) galvinised Barbed wire for each pole wound over a length 1Mtr)

Danger plate(written in Urdu and English), with Clamps & Weather Proof as per IS 8709-1977)

Earthing Complete by GI Rod 20mm 2.5 mtr long through GI Wire 8 swg complete job for Steel Tubular poles including Nuts and Bolts.

Red Oxide Paint

Aluminium Paint

Cement Bottoming 1:2:4 mix as per REC standards including muffing, form work and allied job 0.45 cum/pole for 8.0 mtr STP and 0.5 cum/Pole for 9.0 mtr and 11.0 mtr STP (To be quoted in erection only)

Aluminium Jointing Sleeves for 30 sqmm-100 sqmm ACSR Conductor

Galvanised Stay Set with 50x8mm stay clamp, guy insulator, anchor plate (200x 200 x 6 mm), nut-bolts,turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete with cement concrete as per standard drawings

PG Clamps suitable for 30sqmm-100sqmm ACSR Conductor

Wedge Connectors for ACSR Conductor for DTR only

Suspension/Tension Clamp with eye hook including GI Clamps for HT/LT AB Cable

Straight through cable jointing Kit for LT AB Cable

Piercing Connectors (16-120Sqmm)

35mm² (LT) AB Cable ( 3 x 35 + 1 x 16 + 1 x 35 mm²) XLPE

50 mm² (LT) AB Cable ( 3 x 50 + 1 x 16 + 1 x 35 mm²) XLPE

70mm² (LT) AB Cable ( 3 x 70 + 1 x 16 + 1 x 50 mm²) XLPE

120 mm² (LT) AB Cable ( 3 x 120 + 1 x 16 + 1 x 95 mm²) XLPE

120 mm² 11kV (HT) AB Cable (3x120 + 1x95 mm²) XLPE

Heat Shrinkable Outdoor Cable Termination Kit for 11KV ABC

Mid Span Straight Through Jointing Kit for 11 KV ABC

11/0.433 KV, 3 phase, 100 KVA Distribution Transformer with bimetallic terminal connectors, LV cable box with detachable Al gland plate, Energy Efficiency level 1 (Al. wound) as per IS-1180 including amendments 1,2,3 & 4.

11kV, 200A, 25kA for 3sec, 3-ph, 3 Pole,9 Post Vertical Mounting type Gang Operated, AB Switch along with Support Insulators, Base Channel down Pipe, Arcing Horns etc. complete.

9KV, 10KA Lightening/Surge Arrester (sets of 3 Nos) for DT.(Station Type)

11 kV, 3-ph, 200 A Horn Gap fuse units (set of 3 units) along with Support Insulators, Base Channel, fuse barrel etc.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long(set of 3) as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, bobbin Insulator 50mm with suitable strap clamp, GI nuts, bolts & washers.it shall also include Gi Wire for earthing of LTDB, LTCT and GO handle refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover with required treatment

LT Distribution Box with mounting clamps for 100 KVA DTR with Suitable MCCBs for incoming and outgoing Circuits with suitable rating including Glands of SS as per Technical Specification

Sundry Items Like Lugs (Cu/Al) ,Binding Tape, Cable Ties, glass Sleeve, Jumpers, ferules ,Glands etc per DT including LT Panel

95 mm² Single-Core Cable, 1.1kV Grade, XLPE Insulated, unarmoured Stranded Al Conductor FRLS type

LT 3 Phase Distribution Box (Metallic) with Busbar for service connection including GI clamps ( Pole mounted)

4 core 35 sqmm,1.1kV ,XLPE Armoured Cable from AB Cable taping point through Piercing connector to MSDB

LT Single Phase Distribution Box (Metallic) with Busbar for service connection including GI clamps ( Pole mounted)

Single core 25 sq mm , 1.1kV XLPE Armoured Cable from AB Cable taping point through Piercing connector to MSDB

11kV Isolator ,3 pole 600 Amps with earth switch horizontal mounting type with all accessories.

Guard netting 6 SWG/8 SWG wire

Sign Board as per Technical specification(18 inch X 12 inch)

Dismantaling of existing 11/0.433kV, 3 Phase Distribution Transformer of various capacities up to 250kVA including transportation to KPDCL stores (To be quoted in Erection only)

Dismantaling of existing 11/0.433kV, 3 Phase Distribution Transformer of various capacities above 250kVA including transportation to KPDCL stores (To be quoted in Erection only)

Dismantling and all allied jobs including handling and re-erection for straightening of existing poles of any size including Cement Bottoming (To be quoted in Erection only)

Dismantling and all allied jobs of wooden poles and under sized PCC poles including transportation to KPDCL Stores or disposal to designated site. (To be quoted in Erection only)

Dismantling of existing conductor of various sizes including all accesories on HT/LT lines including transportation to KPDCL stores. (To be quoted in Erection only)

M/s. Mohd. Arif Sheikh