Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.6 LAccepted-AOC | L1 | Accepted-AOC AOC awarded due to L1 bidder | |
| 2 | L2₹49.0 L+₹1.0 L (2.15%)Rejected-Finance | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹49.7 L+₹1.7 L (3.58%)Rejected-Finance PO BAZAR LINE BOMDILA DIST WEST KAMENG ARUNACHAL PRADESH PIN 790 001 | WEST KAMENG | ARUNACHAL PRADESH | 790001 | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹50.9 L+₹2.9 L (6.02%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹52.3 L+₹4.3 L (9.01%)Rejected-Finance | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹47 L
EMD Value
₹96,000
Closing Date
9 Aug 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL BIRENDRA SINGH
GE 859 EWS PIN- 913859 C/O 99 APO
PROVN OF CERTAIN TOILET BLOCK AND BATHROOM B/R WORKS AND SPECIAL REPAIR WORKS TO BLDG NO T-480,T-336 AND T-267 AND T-229, T-298 AND T-562 OF AGE B/R AND AGE E/M UNDER GE 859 EWS
2023_MES_609803_1
8445/E8
Open Tender
Civil Works
Item Rate
180 days
TENGA VALLEY
PL REFER TO TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹96,000
Yes
11 Oct 2023
19 Jul 2023
10 Aug 2023
19 Jul 2023
9 Aug 2023
2 Aug 2023
Amount
Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings with complete all as specified and directed.
Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.
Supply and Fix 0.80 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 120 gsm complete all as specified and as directed.
M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces.
Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.
Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish)
S & F 3mm thick figured glass, pin head glazing with oil putty /wooden beads in squares n exc 0.50 Sqm in each pane.
Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level)
M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub floor finishing cement concrete surface even and smooth using extra cement
M&L for 15 mm thick screed bed in CM 1:6 for laying floor tiles.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding .38 sqm, etc in floors set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Orient Bell/ Johnson/ Somany).
Dismantling of wall and ceiling board or insulation boards/slabs/blanckets/any thickness including cover fillets
M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation.
S&F 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces.
S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces.
M & L for 2 nd class Hard wood plain fillets, square, rectangular or triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm.
M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C1 using 40 mm graded stone aggregate as in plinth protection surface finished even and smooth using with extra cement
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm
S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete
M&L Second class hard wood in Scantling clean sawn with complete all as specified and directed.
S & F 2nd class hard wood plain framed panelled shutter 35mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer 30mm thick
S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc
S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0.
S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed.
S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed.
S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed
S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed
S & F 150mm size extruded aluminium alloy handles, fabricated type anodised
S & F 100mm size extruded aluminium alloy handles, fabricated type anodised
S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed
S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece
S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.
S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets, curtain ring @ 7 nos/Rm and decorative end supports etc complete all as directed”
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil
Excavation over areas n exc 1.5 m deep and getting out in hard/dense soil.
Excavation in trenches n,exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in hard/dense soil.
M&L PCC 1:4:8 type D2(using 40mm graded aggregate)as in foundation filling and mass concrete etc.
M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete.
M&L for precast cement concrete solid building blocks (1:3:6), type C-1, 10 cm thick (with plain or interlocking joints as directed) setting in cement mortar (1:4), complete, laying inner side of wall.
M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in beams, plinth beams, cantilevers, bressummers, lintels over 1.5 m span etc complete.
M&L for MS TMT bars 10mm dia and over, cut to lenth, bend to shape required, including cranking, bending, sprially for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.
M&L for MS TMT bars 06 mm dia and over, upto and including 10 mm dia in stirrups, spaces and binders.
Form work to edges of concrete flat, tread, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n.exc 10 cm wide for rough finish surfaces of concrete.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete.
M&L rendering 15 mm thick in CM 1:4 on concrete surfaces finished even and smooth without using extra cement .
M&L for rendering 15 mm in CM (1:6) over concrete wall surfaces finished even and smooth without using extra cement.
M&L for newly plastered surfaces of walls and applying two coats of cement based paint, over a coat of primer complete all as specified and directed.
Preparing newly plastered surfaces of walls and applying two coats of white wash.
Returning/filling in including spreading, levelling, watering and well remming in hard/dense soil.
Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point.
M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and rammed to a true surface.
M&L for 15 mm thick screed bed in CM 1:4 for laying floor tileswith complete all as specified and directed.
M & L for Non-skid ceramic tiles 7 to 8 mm thick coloured tiles( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match.
M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finshed rough to receive tiles .
M & L for 350 x 250 x 7 mm/450 x 350 x 7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
S&F Pre-Painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.
S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing.
S & F vitreous china wash down water closet pan of pedestal pattern, white with 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified.
S & F plastic water closet seat cover, white closed pattern with flat bottem, and cover and mild steel chromium plated or aluminised hinging device complete.
S & F Vitreous China Squatting pan 'Orissa pattern' size 580 x440 mm white with integral foot rest.
S & F 10 litres PVC, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets complete.
S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls
S&F PVC (SWR) junction single, (single T) equal or unequal with access door 110mm dia.
S&F PVC (SWR) bends any radius, bend 110mm dia.
S&F PVC (SWR) vent cowl 110mm dia
S&F PVC (SWR) WC connector 110mm dia lip ring.
S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.
S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints fixed to walls.
S&F PVC (SWR) bends any radius with access door, 75mm dia.
S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls .
S& F 20 mm bore galvanised steel tubes medium grade with all fittings for water supply pipes fixed to walls.
S&F 15 mm dia bib taps, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F 15mm bore angle stop valves, fancy type chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions & fixed.
S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between fllanges.
S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in ends of brackets or errecting stand but exclusive of fixing of waste pipe and CI brackets complete all as specified and directed.
S&F 32 mm bore Low density poly ethylene pipes of pressure rating 6kgf/cm2 fixed complete to walls,ceiling or in floors etc.
S&F 15 mm bore chromium plated fancy type pillar tap cast copper alloy with capstan heads, screwed down high pressure,with or without leterred "Hot ot Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
S&F vitreous china bowl urinal flat back, size of 465x355x265 mm white (minimum), (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs, fixing of flush pipe, waste pipe, grating and connection to water supply pipe complete all as directed.
S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe(minimum weight 60 gms).
M&L for swivel shower rose of PTMT any colour for fixing with 15mm pipe.(Min Wt 40gms) all as specified and directed.
S & F health foucet with duble lock 1.2 mtr stainless steel flexible hose & wall hook(Make Hindware Cat No 16000)
S&F soap dish, any type, fiexd to plugs with chromium plated brass screws
S& F brass chromium plated toilet paper holder white/coloured.
S&F Rotational mounded polythene water storage tank of 500 ltrs capacity, (multilayered, cylindrical, vertical with closed top) hoisted and fixed in position as specified in SSR Pt-I.
S&F Rotational mounded polythene water storage tank of 1000 ltrs capacity, (multilayered, cylindrical, vertical with closed top) hoisted and fixed in position as specified in SSR Pt-I.
S&F ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipes of 20 mm dia or brass ferrule and fixed, all as directed.
S&F Gun metal globe or gate valve with Iron wheel head, screwed both ends for 20 mm dia of pipe and fixed.
S & F framed work such as grills, gratting,framed brackets of angles or tees with web and flange cut to shape etc with ends of bars, shouldered and/or reveted, or forged into spikes, framed guard bars, framed works of water tankes stagging,gates and similar work con-forming to Fe.290.Gde-E-165.
M&L for construction of 1.20 m dia x 3.00 m deep soakage well, excavation in hard/dense soil foundation PCC 1:3:6 ,wells of honey combed stone masonry wall, including intercepting chamber, screen chamber, RCC cover slab, filling with brick bats etc complete all as specified.
M&L for construction of septic tank for 10 users, in hard/ dense soil, foundation in PCC 1:3:6 type C-1, stone masonary wall in CM 1:4, RCC slab cover including RCC precast manhole cover having 6mm plate embedded all around/ fibre reinforced cover with angle iron frame vent shaft and sludge chamber complete all as specified in ED-2007 and as directed.
Material and labour for providing PCC (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 150mm on after they are laid and tested complete all as specified and directed..
Material and labour for Salt glazed stone ware drain pipe 150 mm dia grade A laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed.
Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (HRFR), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (HRFR)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.
All as per item No. 99 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size
All as per item No. 99 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed.
All as per item No. 99 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified.
S&F Socket outlet 2 in 1, 3 pin, 5 amp flush type
S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed.
Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.
Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed.
S&F LED lamp 9 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min). Make- Havells/Crompton/Syska
S&F LED lamp 10 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min). Make- Havells/Crompton/Syska
Supply and fixing LED light fitting 1 x 20 Watt 220 volt AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed.
S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 32 mm dia pipe and 02 numbersclmaps, all fixing arrangements such as fastners, bilts, nuts washers etc all as specified and directed.
S & F in replacement of GI brackets for fixing LED building security light fitting fabricated out of GI tubing 32 mm dia, light grade, 0.9 mtr long , bend to 120 degree shape by cutting, welding and well finishing including MS clamp of flat iron of size 30 x 4 mm -02 Nos complete for fixing on wall including all fixing arrangements such as fastners, bilts, nuts, bolts washers etc including making good disturbed wall surfaces matching with the existing surface and finishing complete all as specified and directed by Engr in charge
S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed.
Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 04 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.
Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 8 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.
S&F MCB SPN having braking capacity 10KA, 32 Amps, 240 V complete all as specified and directed.
S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed.
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.
S&F in replacement of 1100 Volts grade heavy duty ISI marked cable PVC insulated stranded aluminium conductor one twin core cable flat or circular of size 10 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections
Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc)
Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC.
Taking down sub main wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm
S&F of 1100 Volts grade heavy duty ISI marked cable PVC insulated multi stranded aluminium conductor one twin core cable flat or circular of size 16 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections , of size 10 Smm 2 core. Make :- Havells/ EKI/ polycab /Finolex
M/S ASHOK CONSTRUCTION
M/S NIRMAL TRADERS
M/S N D ENTERPRISE
M/S YOGENDRA CONSTRUCTION CO
M/S SUNRISE CONSTRUCTION AND CO
Sikha Traders
M/S Karkies Construction & Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .