Karnataka

AOC

Works

Other Works

Construction of Sub Division office Building in Athani Taluka, Dist-Belagavi (MI & GWDD) (4702)

Minor Irrigation Department

Minor Irrigation Division Belgaum | Belagavi, Karnataka

Amount: ₹80.2 LCloses: 30 Mar 2026Closed

Timeline

Published23 Mar 2026
Closed30 Mar 2026
Awarded—

Bids

1 Bid30 Mar 2026

#	Company	Amount	Status
1	Ms S K GANAGER CONSTRUCTION CO ₹84.1 Laccepted-aoc	₹84.1 L	accepted-aoc

Tender Value

₹80.2 L

EMD Value

₹1.6 L

Closing Date

30 Mar 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Minor Irrigation Department

Contact Person

Mahadev B

Mobile Number

Work Description

Construction of Sub Division office Building in Athani Taluka, Dist-Belagavi (MI & GWDD) (4702)

Tender Information

Tender ID

MI/2025-26/OW/WORK_INDENT11326

Reference Number

MI/2025-26/OW/WORK_INDENT11326

Tender Type

Open

Product Category

Other Works

Form of Contract

Two Tender Document System(Two Cover)

Location

Minor Irrigation Division Belgaum

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredAnnual Turnover Certificate as per KW-3 Qualification of The Tenderer

RequiredCompany/Contractor Registration Certificate

RequiredWork done certificate as per KW-3 Qualification of The Tenderer

RequiredWork done certificate showing quantities of different items executed

RequiredBank credit certificate as per KW-3 Qualification of The Tenderer

RequiredWork in Hand as per KW-3 Qualification of The Tenderer

RequiredGST registration Certificate

RequiredPAN & TAN Certificate

RequiredScanned signature of the bidder/representative to be attached while uploading the bid document

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The Bidder shall ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of KPPP on or before the last date of bid submission.

The tenderer is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidder s end

EMD payments through e-payment mode shall be made as one single transaction and payments made in the part are liable for rejection.

The Tender are invited as per Standard Tender bid document KW-3

Conditional Tenders will not be considered

All relevant documents as per the KW-3 need to be uploaded while submitting bid in general documents provision in KPPP portal.

The Employer reserves the right to accept or reject any of the tender without assigning any reason.

The contractor has make his own arrangements for procurement of all the required materials and the materials so procured shall confirm to the relevant IS Specifications or Equivalent and obtain necessary quality certificate from authorized quality control.

The Contractor is fully responsible for the Equipment / Material until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning. The Contractor is responsible for the proper maintenance of equipment / material as well as protection of the same against theft, elements of nature, damages etc., while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgment in writing

All the documents required as per technical qualification criteria needed to be uploaded in Original or Attested by any official not below the rank of Executive Engineer or Notary

The Contractors should submit all the Documents as uploaded in Original or duly attested by a Notary/an officer not below the rank of an Executive Engineer on or before opening of Technical Bid as Notified

Name, address, and telephone, telex, and fax numbers of the contractor is to be provided

The contractor has to furnish Additional security deposit for unbalance tender as per clause 29.1 of ITT, to an amount equal to difference in contract price and amount put to tender, in addition to 5% performance guarantee (in any of the form prescribed) while concluding the Agreement.

Unique Document Identification Number (UDIN) from Practicing Chartered Accountant is preferred in Annual Turn over

The intending bidders are advised to visit the site of work and make themselves familiar with the local situation regarding the availability of the construction materials, workmen, land required for construction activities etc.

The tenderer shall also disclose if there are any bankruptcy proceedings against him.

The Contractor shall provide work program as per Clause 25 under the chapter Time control of conditions of contract. The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work

During the execution of the works, if any minor minerals are required, contractors have to abide by the Karnataka Minor Mineral Concession Rules 1994 (as amended up to date). As per the prevailing rules for any use of minor minerals the contractor has to submit the Mineral Dispatch Permit obtained from Mines and Geology Department. If Mineral Dispatch Permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty and DMF contribution as per Karnataka Minor Mineral Concession Rules 1994 ( as amended from time to time) will be deducted from the contractors bill at the time of payment

The Work Done Certificates shall be issued by the Executive Engineer (if work done in Karnataka State), otherwise it shall be issued/ counter signed by Superintending Engineer (if work is done in other states).

A copy of GST registration certificate should be uploaded

The contractor shall quote the rates without adding GST for either materials or works contract (Service). GST payable by the contractor under this works contract will be paid to the contractor separately over and above the contractor s bid amount. The increase if any in the GST shall not be paid in the extended period of Contract for which the Contractor alone is responsible for delay as determined by the Authority.

Estimate rates are excluding GST as per Common SR 2023-24 and prevailing GST (18 Percent of Amount put to Tender) amount is kept in form of Overhead sum in sanctioned estimate. According to guidelines in Common SR Amount put to tender and ECV amount are including GST. KPPP Portal format has No Options to add GST separately. The item wise rates do not include GST. Hence, GST will be paid separately for the quoted amount accordingly. Declaration Certificate must be attached mandatorily

If the GST rates are revised during the contract period, payment will be made/withdrawn accordingly

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Mandating satisfactory completion as a prime contractor for at least any similar nature work i.e. Construction of Building value not less than Rs.40.10 lakhs to the extent of 50% of the cost of the work for all works costing upto Rs.100.00 lakhs

Work Done Certificate

Executed in any one year (for a continuous period of 12 months) the following minimum quantities of work-Earth work in both excavation and embankment (combined quantities) -700.00 Cum, Cement concrete (Including RCC & PSC)-300.00 Cum, Providing Steel Reinforcement fabrication-14.94 Tonne

Others -- Work done certificate showing quantities of different items executed

Capabilities of Vendor

Should have been registered as qualified Contractor in PWD

Others -- PWD Registration Certificate

A Copy of GST Registration Certificate

GST Registration

Income Tax :Latest copy of the Income Tax Clearance Certificate and Sale Tax Clearance PAN and TAN Nos.

Others -- PAN and TAN Nos.

Scanned signature of the bidder/representative to be attached while uploading the bid document

Others -- Scanned signature

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 (a) Achieved in at least two financial years an average annual financial turn over (in all classes of civil engineering construction works only) of Rs.80.50 lakhs (usually not less than the estimated cost under this contract)

Audited CA Certificate of Annual Turnover

Liquid assets and /or availability of credit facilities of no less than Rs.25.00 Lakhs (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc. (usually 30% of the amount contract) (As per the Proforma given in page No.18)

Line of Credit

Assessed available tender capacity- AxNx2.50-B where A-Maximum value of civil engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited. B-Value, 2025-26 price level, of existing commitments and on-going works to be completed during the next 6/12 years (period of completion of the works for which Tenders are invited) Note- The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Others -- Work in Hand

Fee & Financial Details

Tender Fee Amount

₹2,010

EMD Fee Amount

₹1.6 L

Important Dates

Last Activity

30 Mar 2026

Published

23 Mar 2026

Bid Opening

1 Apr 2026

Download Ends

27 Mar 2026

BOQ Preview

•

Components of Ground Floor

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Additionalities for formwork, centering & scaffolding for foundation upto plinth (a) Isolated at 8 percent etc., complete with all leads & lifts, as per detailed specifications, drawings and direction...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Additionalities for formwork, centering & scaffolding for colomns at 70 percent etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge...

•

Additionalities for formwork, centering & scaffolding for plinth beams of buildings at 50 percent etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the ...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Additionalities for formwork, centering & scaffolding for beams and lintels of building at 60 percent etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of ...

•

Additionalities for formwork, centering & scaffolding for chejjas, conopy & other architectural projections of minor sections at 45 percent etc., complete with all leads & lifts, as per detailed speci...

•

Additionalities for formwork, centering & scaffolding for roof slab of building at 50 percent etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engi...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upt...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Providing and fixing factory made pre fabricated non-monolithic Premium R.C.C. Door Frames factory manufactured in separate parts and assembled at bolts nuts system with mechanical table vibrating as ...

•

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

•

Providing & fixing of 3track x 2panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastom...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead ...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth etc., complete wit...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...

•

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

•

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

•

Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including co...

•

Supply of PVC pipe-OD 25mm and 10 kg/sqcm etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Supply of PVC pipe- OD 32mm and 10 kg/sqcm etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Supply of PPR Double Union Ball Valve confirming to IS 15801-2008 and DIN Standards 8077/8092 etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engi...

•

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer...

•

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092 etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engine...

•

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-i...

•

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092 etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer...

•

Polyethylene water storage tank with cover and suitable locking arrangement etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (R...

•

Providing and fixing brass stop cock of approved quality etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specific...

•

Providing and fixing gun metal non- return valve of approved quality (screwed end) etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Cha...

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

•

Poly Propylene Random Co-polymer (PPR) pipe with fitting SDR 7.4 -50 mm Outer dia etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Char...

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour etc., complete with all leads...

•

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet ...

•

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

•

Supply of PVC pipe-OD 110mm and 6 kg/sqcm etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Supply of PVC pipes of 8 kg/cm2 for 75mm etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant IS Specifications)

•

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments etc., complete with all leads & lifts, as...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...

•

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...

•

Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the En...

•

Providing and fixing bright finished brass hanging type floor door stopper

•

with necessary screws, etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the ...

•

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc., complete with all leads & lifts, as per detailed specifications...

•

Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of ...

•

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

•

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the ...

•

Terrace Floor (First floor)

•

Polyurethane based Single Component for New Surface-Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/...

•

Providing and fixing bright finished brass hanging type floor door stopper

•

with necessary screws, etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the ...

•

Providing and fixing chromium plated brass night latch of approved quality

•

including necessary screws etc. complete with all leads & lifts, as per detailed specifications, drawings and directions of t...

•

Electrification work

•

Concealed Conduit System: Supplying heavy gauge PVC conduit pipe19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before c...

•

Concealed Conduit System: Supplying heavy gauge PVC conduit pipe25mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before conc...

•

supplying heavy gauge PVC Conduit Pipe 19/20 mm dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and c...

•

Supplying heavy gauge PVC Conduit Pipe 25 mm dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and ceme...

•

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc., complete with all leads & li...

•

Supplying and fixing PVC/metal conduit accessories Deep junction box etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engineer-in-Charge. (Relevant...

•

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, up to wall surface complete etc., complete with all leads & lifts, as per detail...

•

Supplying PVC/GI flexible conduit pipe 20mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...

•

Supplying PVC/GI flexible conduit pipe 25mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...

•

Point wiring using Copper wire without switch:Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi s...

•

Wiring for lighting/power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirmin...

•

Supplying and mounting 2 Nos. of 2 way 6 amps flush type switches either surface/flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring a...

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board etc., complete with all leads & lifts, as per detailed specifications, drawings and directions of the Engi...

•

Supplying and flush mounting powder coated / galavanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch/ Socket /stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 etc., complete with all leads ...

•

Supplying and fixing hylum brand plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws etc., complete with all...

•

Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size 80/90 mm conduit using necessary machine screws etc., complete with all leads & lifts, as per detailed specifi...

•

Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size 110 mm conduit using necessary machine screws etc., complete with all leads & lifts, as per detailed specifica...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

•

Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote etc., complete with all leads & lifts, as ...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Royalty.pdf

Others - royalty • 0.19 MB

drawing.pdf

Others - Drawing • 0.38 MB

detail specification.zip

Others - Specification • 29.02 MB

STD kw-3 11326.doc

Tender Document • 0.23 MB

star rates.pdf

Others - star rate • 1.28 MB

banker certificate.doc

Others - Line of credit • 0.03 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Ms S K GANAGER CONSTRUCTION CO

₹84.1 Laccepted-aoc