REPAIR TO PROTECTIVE WORKS, HARDSTANDING, DRAINS WORKS AT KASAULI, CERTAIN LT WORKS AT DAGSHAI AND INTERNAL ELECTRIFICATION WORKS AT SOLAN, DAGSHAI AND KASAULI UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where complete all as specified and directed.

M&L cement concrete in surface channels and drain type C-1 1:3:6 (20mm aggregate) complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 ( using 40mm graded stone aggregate) as in sub base to flooring including necessary form work and finishing surface fair and even complete all as specified and directed.

M&L for M & L PCC Type B1 1: 2:4 (20 mm graded stone aggregate )Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges as in coping ,kneelers , appex stone etc.

M&L machine pressed precast prepolished concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 grade above 20 mm screed of 1:6 complete all as specified and directed.

M&L for pre polished Chequered cement concrete tiles 30 cmx 30cm x 25 mm thick, with grey cement and pigment set jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in CM 1:6 in floors with grey cement and pigments complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar including quions, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposing off the rubbish materials where complete all as specified and directed.

M&L for brick work with sub class `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M & L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 as in retaining wall ,parapet wall etc complete all as specified and directed.

All as per item No 9.00 but except stone complete all as specified and directed.

M&L for boulder fiiling dry, hand packed tightly as in back filling of retaining wall complete all as specified and directed.

PVC SWR pipes 75 mm dia in any length with rubber ring joints laid in trenches or wheep holes complete all as specified.

M & L for Rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces incl finishing surface without using extra cement complete all as specified and directed.

Preparation of newly plastered surfaces of wall & applying two coat of cement based paint complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses( Hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 20mm) complete all as specified.

Dismantling posts or struts (Wood, steel or RCC) any section including taking out embedded portion in concrete, brick work, masonary etc, and making good disturbed ground complete all as specified and directed

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil etc complete all as specified.

S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc ; flat iron fillets (for securing wire mesh etc) including all necessary drilling, welding, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M& L for PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in foundations,filling and mass concerete etc complete all as specified.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc,complete all as specified.

Taking down carefully aluminium/ copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as switches, sockets, lamp holder, utility light fitting, fan regulator, ceiling rose etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

M & L for point wiring with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing sunken boxes for mounting of switch, socket etc complete all as specified and directed for the following :- Note : 3 running meter measure as 1 running meter.

One Light/Fan point controlled by one, one way switch 6 Amp complete

One Bell point controlled by one, one way switch 6 Amp complete

One switch socket outlet 3 pin, 5 Amp on the independed board

One switch socket outlet 3 pin, 5 Amp on same board

All as per item No 22.00 here-in-before but 4.0 sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts incuding 4.0 sqmm stranded copper conductor (FRLS) PVC insulated greeen in colour as continous earth conductor connected to common earth and earth dolly with all accessories one 5 pin 16 Amp socket (Power point) on independent board complete all as specified and directed : Note : 3 running meter measure as 1 running meter

M & L for point wiring with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts grade drawn through and including non metallic rigid PVC concealed/surface conduit 20mm dia or higher with all PVC conduit accessories with suitable size of anodised switch box concealed in wall for mounting of switches, sockets, fan regulators etc with 3mm thick ISI marked plastic laminated sheet with earth continuity conductor of size 1.5 sqmm single core copper conductor multistranded cable (FRLS) connected to common earth dolly for the following complete all as specified and directed :- Note : 3 running meter measure as 1 running meter.

One Light/Fan point controlled by one, one way switch 6 Amp complete

One Bell point controlled by one, one way switch 6 Amp complete

One switch socket outlet 3 pin, 5 Amp on the independed board

One switch socket outlet 3 pin, 5 Amp on same board

All as per item No 24.00 here-in-before but 4.0 sqmm single core multi stranded copper conductor PVC insulated unsheathed (FRLS) cable 1100 volts incuding 4.0 sqmm stranded copper conductor (FRLS) PVC insulated greeen in colour as continous earth conductor connected to common earth and earth dolly with all accessories one 5 pin 16 Amp socket (Power point) on independent board complete all as specified and directed : Note : 3 running meter measure as 1 running meter

M & L in replacement sub main wiring with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing caping required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces etc after incl down unsv if reqd all as specified and directed.

S & F in repair/replacement switch piano flush button single pole one way, 6 Amps, 240 Volt incl taking down unsv complete all as per specified and directed

S & F in repair/replacement bell push piano flush type 5 amps , 240V incl taking down unsv complete all as per specified and directed

S & F in replacement buzzer ding dong, AC 230 volts Single Phase incl taking down unsv complete all as per specified and directed

S & F in repair/replacement socket outlet 2-in-1 5 pin, 6 Amps flush type complete all as specified and as directed.

S&F in repair/replacement switch piano flush button single pole one way, 16 Amps, 230/240 V incl taking down unsv complete all as specifed and directed

S&F in repair/replacement socket outlet 2-in-1 5 pin, 6 & 16 Amps flush type incl taking down unsv complete all as specified and as directed.

S&F in replacement PVC Plug Top 5 pin, 6 & 16 Amps flush type incl taking down unsv complete all as specified and as directed.

S & F in repair/replacemnt ceiling rose surface, backelite, three terminal, 240 volts incl taking down unsv complete all as specified and directed.

S & F in repair/replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings incl taking down unsv complete all as specified and as directed.

S&F Wall mounted LED batten box type pre coated CRCA body suitable for retrofit LED tube rod 18/20 Watt fixed in repair incl taking down unsv complete all as specified and directed.

S&F LED self ballasted LED retrofit tube lamp 18 Watt with thermoplastic body min 1800 system lumens and builtin surge protection of 2.5 KV incl taking down unsv complete all as specified and directed.

S&F Wall mounted mirror light LED fitting self ballasted LED batten extruded thermoplastic body with PC diffuser in unique square shaped 10 /12 watt 2 Feet long CCT 6500K fixed in repair incl dismantling taking down unsv fitting any type complete all as specified and directed.

S&F Surface mounted LED bulk head 10 watt luminaire with ABS body & polycarbonate diffuser IP 65 including connecting to ceiling rose with 0.5 sqmm two core copper flexible conductor cable fixed in repair incl lamp incl taking down unsv complete all as per specified and directed.

S&F self ballasted LED Retrofit Bulb 5 Star Bulbs 9 Watt with PBT body shell and PC diffuser. 210 digree wide distruction CCT 6500K, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL/LED Bulb complete all as specified and as directed.

S&F self ballasted LED Retrofit Bulb 5 Star Bulbs 12 Watt with PBT body shell and PC diffuser. 210 digree wide distruction CCT 6500K, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL/LED Bulb complete all as specified and as directed.

S&F self ballasted LED Retrofit Bulb 3Watt with PBT body shell and PC diffuser. 210 digree wide distruction CCT 6500K, E-14 cap, (Thread type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL/LED Bulb complete all as specified and as directed.

S&F self ballasted LED Retrofit Bulb 3Watt with PBT body shell and PC diffuser. 210 digree wide distruction CCT 6500K, E-27 cap, (Thread type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL/LED Bulb complete all as specified and as directed.

S&F LED Slim panel size 2'x 2' ,36/40 Watt recess/ surface mounting edge lit LED slim panel having white powder coated extruded aluminium body with high quality LGP and PMMA diffuser , separate HPF driver suitable for Armstrong and grid ceiling separate accessories for recess /surface mounting PCGLP 2X 2, CCT 4000K fixed in repair incl dismantling taking out unsv one of any make/ size complete all as specified and as directed.

S&F Recess mounting ceiling fitting 1'X4' LED 36/40 Watt light Edgelit slim panel having white powder coated extruded aluminium body with high quality LPG and PMMA diffuser. Separate HPF driver. Suitable for Armstrong and Grid ceiling, PF min 0.95 complete incl dismantling taking out unsv one of any make/ size complete all as specified and as directed (As per existing Sample).

S&F Recess mounting ceiling fitting 1'X1' LED 18/20 Watt light Edgelit slim panel having white powder coated extruded aluminium body with high quality LPG and PMMA diffuser. Separate HPF driver. Suitable for Armstrong and Grid ceiling, PF min 0.95 complete incl dismantling taking out unsv one of any make/ size complete all as specified and as directed (As per existing sample).

Supply and fixing building security LED light 25 Watt energy saving LED ASTRA NEO street light made up of pressure dia cast housing with toughened glass and high power LEDs with option of secondary optic with IP66 protection, efficacy : 110LM/W one GI medium grade 25mm dia bracket of total lenghth 50 cm incl 2 Nos MS Clamp and fastners after dismantling taking down unsv one all as specified and directed.

S&F MCB DB TPN 4 way double door, IP 43, CRCA sheet powder coated vertical type factory made suitable for incorporating MCB as out going and MCCB as incoming including connecting incoming and outgoing cables & blaking plate as required incl taking down existing unsv DB of any size and making good distrubed surface to match with existing complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

S&F MCB DB SPN 4 way double door, IP 43, CRCA sheet powder coated, factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables & blaking plate as required including taking out existing unserviceable DB of any size and making good disturbed surface to match with existing incl taking down unsv complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

S&F MCB DB SPN 8 way double door, IP 43, CRCA sheet powder coated factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables & blaking plate as required incl taking out existing unsv DB of any size and making good disturbed surface to match with existing incl taking down unsv complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

S&F MCB TPN 63 Amps, 10 KA 415 Volt, 50 Hz, IS/IEC 60898-1, 'C' curve including taking down unserviceable complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

S&F MCB SPN 32 Amp to 40 Amp, 10 KA, 240 volts, IS/IEC 60898-1, 'B' curve including taking down unserviceable complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

S&F MCB SP 6 Amp to 32 Amp 10 KA, 240 volts, IS/IEC 60898-1, 'B' curve including taking down unserviceable complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble)

S&F Single pole and neutral enclosure with a two pin and earth plug and socket board with IS 13032, IS 8623 complete with one single pole 20 amp MCB complete incl dismantiling taking out unsv complete all as specifed and directed by Engr -in-Charge.

S&F Heating Element ISI Marked round/ tringular base, push type or thread type including rubber washer for 1.5/2.0 KW suitable for geysers 25 Ltrs to 50 Ltrs capacity (as per existing sample) including taking down unserviceable complete all as specified and as directed.

S&F thermostat ISI Marked suitable for geysers 25 Ltrs to 50 Ltrs capacity (as per existing sample) including taking down unserviceable complete all as specified and as directed.

S&F Chromium plated connections 45 Cm long for Hot/Cold water of 15mm size with cromium nuts and washsers fixed as in repairs complete all as specified.

S & F in repair/replacement of PVC gang box suitable for 6 Amp Socket and 6 Amp switch complete all as per specifiec and directed

S & F in repair/replacement of PVC gang box suitable for 16 Amp Socket and 16 Amp switch complete all as per specifiec and directed

Supply only electric insulation tape heavy duty complete all as per specifed and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium, conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sq. mm x 2 Core nominal cross section in service connections complete all as per specifed and directed.

S&F in Replacement Exhaust Fan 250mm plastic body , 1400 RPM with air delivery 1050 CMH including and taking down unserviceable, complete all as specified and directed

S&F in Replacement Exhaust Fan 300mm Sweep metal body (Heavy Duty), 1400 RPM with air delivery 1050 CMH including and taking down unserviceable, complete all as specified and directed.

S&F 40 Watt post top fitting powder coated aluminum die cast and spun aluminium with decorative clear diffuser suitable for landscape lighting in 5700K CCT and IP 65 protection fixed in repair including and taking down unserviceable complete all as specified and directed.

S&F Recess mounting ceiling fitting 6" round dia 9/12 Watt light Edgelit slim panel having white powder coated extruded aluminium body with high quality LPG and PMMA diffuser. Separate HPF driver. Suitable for Armstrong and Grid ceiling, PF min 0.95 complete incl dismantling taking out unsv one of any make/ size complete all as specified and as directed (As per existing sample).

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in deep getting out in hard/dense soil for stay assembly/laying of cable/errection of poles etc complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

M&L for taking out old unserviceable with supply, laying, fixing Double walled corrugated HDPE duct pipe of 50mm outer dia confirming to IS-14930 (Part-II) of approved colour with fittings for cable protection complete all as directed.

All as per item No 69.00 here in before but of 90mm outer dia complete all as specified and directed.

Dismantling taking out carefully old/unserviceable UG cable of any type/ size from trenche/pole/duct/LT panel after disconnecting from OH conductors/MCCBs/joint boxes for relaying/refixing or carrying to store for Sch of Credit.

M&L for passing through pipe testing and commissioning of 1100 Volts grade 'Heavy duty' PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armored with galvanised steel wire or tape and overall PVC sheathed of size 10 Sqmm nominal cross sectional area 2 core with suitable glands and lugs as per site requirement confirming to IS specification, complete all as specified and directed .

All as per item No. 72.00 here-in-before but 16 Sqmm 3.5 core complete all as specified and directed.

All as per item No. 72.00 here-in-before but 25 Sqmm 3.5 core complete all as specified and directed.

All as per item No. 72.00 here-in-before but 35 Sqmm 3.5 core complete all as specified and directed.

All as per item No. 72.00 here-in-before but 50 Sqmm 3.5 core complete all as specified and directed.

All as per item No. 72.00 here-in-before but 120 Sqmm 3.5 core complete all as specified and directed.

M & L for Earthing complete with galvanised steel earth plate electrode 6mm thick of size 600x600 mm buried directly and vertically in ground with top edge of the plate not less than 2.25 mtr from GL, connected with galvanised iron strip 32x 6 mm all as shown in Plate No-3, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx50mm with handle for lifting made out of 8mm dia MS rod, funnel, wiremesh, 25 mm dia light grade GI tubing for protection of GI Strip 32x6 mm, charcoal and salt in alternate 150mm thick layers around GI earth plate, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.

M&L for restraining of overhead ACSR conductor of any size of 5 conductor on pole after disconnecting all jumpering connection & binding of insulators and redoing all jumper connection and insulator binding with aluminium conductor providing required T&P all as specified and directed.

M&L for restraining of ACSR conductor of any size of 2 conductor on pole after disconnecting all jumpering connection & binding of insulators and redoing all jumper connection and insulator binding with aluminium conductor providing required T&P all as specified and directed.

S&F MCCB 630 Amps 4 Pole 415 V, 50 Hz adjustable thermal type ( 80% to 100% ) and adjustable magnetic setting, breaking capacity 36 KA , ICS =100 ICU with extended terminals connecting up in the existing panel location including taking out existing unserviceable MCCB complete all as specified and as directed by Engineer-in-Charge.

All as per item No 81.00 here in before but MCCB 400 Amps 4 Pole, 36 KA, 415 V, 50 Hz complete all as specified and directed.

All as per item No 81.00 here in before but MCCB 250 Amps 4 Pole, 36 KA, 415 V, 50 Hz complete all as specified and directed.

All as per item No 81.00 here in before but MCCB 160 Amps 4 Pole,16 KA, 415 V, 50 Hz complete all as specified and directed.

All as per item No 81.00 here in before but MCCB 100 Amps 4 Pole,25 KA, 415 V, 50 Hz complete all as specified and directed.

All as per item No 81.00 here in before but MCCB 63 Amps 4 Pole,25 KA, 415 V, 50 Hz complete all as specified and directed.

S&F On load change over switch, four pole with advance neutral 400 Amps, 415 V, 50 Hz conforming to IS : 13947 Part-3 connecting up in the existing panel location including taking out existing unserviceable change over switch complete all as specified and as directed and as directed by Engineer-in-charge.

S&F GI tubing light grade 80mm bore, ISI marked, for cable protection.

S&F 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 6 sqmm and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension GI wire from OH conductor to building incl dismentling taking down unserviceable one all as specified and directed.

All as per item No. 89.00 here-in-before but 10 Sqmm complete all as specified and directed.

All as per item No. 89.00 here-in-before but 16 Sqmm complete all as specified and directed.

M&L for painting of steel tubular pole with one coat of alumium paint incl cross arm, bracings, supports, nuts, bolts, of LT OH line from above copping to top of pole and marking with alternate Yellow and black paint strip 30 cm wide (5 Nos) with synthetic enamelled paint all as specified and directed.

M&L for trimming of branches of trees touching LT electric over head line and making clear about 3 mtr in radius by climbing up tree or by providing ladder, at a height 7 mtr and above and carrying and depositing where directed not exceeding 50 mtr.

S&F rigid PVC line spacer, suitable for 2 wire, made from high grade PVC material, distance between phase to phase 300mm, suitable for use with 1100 volts grade including taking down unsv one all as specified and directed.

S&F rigid PVC line spacer, suitable for 5 wire, made from high grade PVC material, distance between phase to phase 300mm, suitable for use with 1100 volts grade including taking down unsv one all as specified and directed.

Design, fabricate ,supply ,testing and commisioning of CPRI approved factory made LT Panel Board out door type fabricated out of 3.15 mm thick CRCA sheet steel for outer body and 2.00mm thick CRCA Sheet for inner partition walls, independent cabinate with cabinate doors for MCCBs, Bus Bars, cable trays, metering equipment, vertical type floor mounted, minimum IP-54 protection, mounted on angle iron frame made out of ISA 50x50x5mm with minimum ht of legs of 45cm, suitablily grouted to PCC 1:2:4 complete with internal wiring, epoxy powder coated including dismantling, taking down old panel board, dismantling of all connections and re-connection of cable ends with suitable size of aluminium cable lugs with the following accessories. (Note :- Schematic diagram of panel should be approved by Engr-in-Charge before fabrication) : - (a) PANEL BOARD (i) Panel Board Enclosure with copper Bus Bar of high conductivity 200Amp - 01 No (ii) Change over switch Enclosure of 250 Amp - 01 No (iii) Cable Alley (iv) Digital Metering with enclosure - 01 No (b) INCOMING (i) MCCB 160 Amps, 4 Pole, 415 V, 35 KA, adjustable type with extended terminals - 01 No (ii) Change over switch 250 Amps, 4 Pole, 415 V - 01 No (c) OUTGOING (i) MCCB 100 Amps, 4 Pole, 415 V, 36 KA, adjustable type with extended terminals - 01 Nos (ii) MCCB 63Amps, 4 Pole, 415 V, 36 KA, adjustable type with extended terminals - 02 Nos

S&F enclosure suitable for 4 POLE MCCB 100 A/250A with incomming and outgoing glands including taking out existing unserviceable Enclosure complete all as specified and as directed by Engineer-in-Charge.

Cable jointing kit for 1.1 KV grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE insulated armoured aluminium conductor cable of size 120 sqmm to 185 sqmm including dismantling / taking down unserviceable jointing kit complete all as specified.

Cable jointing kit for 1.1 KV grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE insulated armoured aluminium conductor cable of 50 to 95 sqmm size including dismantling / taking down unserviceable jointing kit complete all as specified.

Disconnecting defective voltage stabilizer indoor type servo controlled , oil cooled 3 phase of capacity 25 KVA draining out complete stabilizer oil & storing the same in suitable containers ( to be arranged by contractor ) opening the top cover and disconecting unsv servo motors , lifiting up core assembly carefully to check the condition of widing and core . Retanking the same after repair refilling the transformer oil after dehydration and filteration, including checking of leakage of transformer body and welding works required for making transformer body leak proof transportation of transformer to and from site to work shop and re-installation the same at any site complete all as specified and directed.

All as per item No. 100.00 here-in-before but 75 KVA voltage stabilizer complete all as specified and directed.

All as per item No. 100.00 here-in-before but 100 KVA voltage stabilizer complete all as specified and directed.

All as per item No. 100.00 here-in-before but 150 KVA voltage stabilizer complete all as specified and directed.

All as per item No. 100.00 here-in-before but 250 KVA voltage stabilizer complete all as specified and directed.

All as per item No. 100.00 here-in-before but 300 KVA voltage stabilizer complete all as specified and directed.

M&L for replacement of burnt /defective stabilizer copper coil with new one made out of super enamelled heavy duty copper wires of size matching to the existing one including varnishing, drying and insulating material in transformer complete all as specified and directed.

S&F in repair single phase AC servo motor(as per sample) suitable for voltage stabilizer of cap 250 KVA

S&F in repair single phase AC servo motor(as per sample) suitable for voltage stabilizer of cap 100 KVA

S&F in repair single phase AC servo motor(as per sample) suitable for voltage stabilizer of cap 75 KVA

Filtration / dehydration of transformer oil in situ till dielectric strength of min 40 KV is achieved, Servo voltage stablizer, capacity 25 KVA to300 KVA indoor / outdoor type, installed at various electric sub stations / pump houses at Dagshai complete all as specified.

Topping up / replacement of transformer oil with new transformer oil suitable for working voltage 430 volts grade including necessary dehydration to achieve dielectric strength min 60 KV at 2.5mm gap complete all as specified. Notes for serial item No 110.00 & 111.00 :- (a) New transformer oil shall be bought in company sealed IS marked container with test certificate. (b) Filtration / dehydration of transformer oil shall be carried out at the location where transformer is installed under the Dagshai and necessary filteration / dehydration plant having pressure gauge, hour meter, temperature gauge shall be brought to site by contractor including electric supply arrangement to run the dehydration equipment and unit rate quoted shall deemed to include the cost of the same.

S&F fix in repair plug in control card (PCB) for 3 phase servo controlled voltage stabilizer of cap 250 KVA (As per Sample)

S&F fix in repair plug in control card (PCB) for 3 phase servo controlled voltage stabilizer of cap 100 KVA (As per Sample)

S&F fix in repair plug in control card (PCB) for 3 phase servo controlled voltage stabilizer of cap 75 KVA (As per Sample)

M&L for repairing servicing of APFC panel board of Cap 50 KVAR by replacing tha all defective components with new components , re wiring , cleaning , testing, reconnecting , reinstalling and commissioning the APFC panel board complete all as directed by Engineer-in-charge. Note : -(i) Supply of cables, wires & other minor spare parts etc. will deemed to be included in the quoted rate.

M&L for repairing servicing of APFC panel board of Cap 100 KVAR by replacing tha all defective components with new components , re wiring , cleaning , testing, reconnecting , reinstalling and commissioning the APFC panel board complete all as directed by Engineer-in-charge. Note : -(i) Supply of cables, wires & other minor spare parts etc. will deemed to be included in the quoted rate.

Dismentling and Supply , install, connect, test and commission , 3 phase, heavy duty, explosion proof, self healing capacitor cylindrical type confirming to IS 13340 of following ratings :-

1 KVAr heavy duty

2 KVAr heavy duty

3 KVAr heavy duty

4 KVAr heavy duty

5 KVAr heavy duty

10 KVAr heavy duty

15 KVAr heavy duty

20 KVAr heavy duty

Supply and fix the following switch gear/components in various APFC Panels installed at Dagshai

MCCB 16A TP, 25 KA

MCCB 25 A , 25 KA

Amount of credit of Rs. 114423.50 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Rajesh Agencies

Vinod Kumar Aggarwal

Varindera And Varindera Construction