Fabrication and Supply of Mechanical Items for Ash Handling Plant of Unit 3 to 4, CTPP, Chhabra

Scraper Bar Length = 1784 mm, width = 200 mm, Fabricated with 10mm & 12 mm, thick mild steel plates. Material : MILD STEEL - IS - 2062. As per drawing / sample

Bar Connector for scraper chain conveyor bars for bottom ash handling system by providing 20x40 mm HT bolts and M20 HT washer Material : EN-8 & C-45 as per drawing / sample.

Drive Sprocket (small), no. of teeth – 19 Nos. Teeth pitch 1 ½”, ID - 130 mm , OD- of sprocket 249mm, Hub OD = 170mm, Hub length = 200 mm,Material – MS as per drawings / sample

Driven Sprocket (big), no. of teeth – 38 Nos. Teeth pitch 1 ½”, ID - 98 mm , OD- of sprocket = 475mm, Hub OD =170mm, Hub length = 200 mm ,Material – MS as per drawings / sample

Sprocket assembly for 22x86 chain which consists 8 Nos. dowel pin Ø10x8 on 257 PCD (push fit), 8 Nos. 5/8” BSW x 90 LG Hex HT bolt with nut & washer on 306 PCD, 8 Nos. dowel pin Ø10x68 on 306 PCD (push fit), 8 nos. sprockets tooth (fush fit), 8 Nos. 5/8” BSW x 90 LG. Hex HT bolt with nut & washer on 257 BSW PCD, 4 Nos. dowel pin Ø10x68 on 220 PCD Eq. spaced. Material to sprocket tooth & adaptor : EN-24/8 as per drawing / sample

Spares teeth for item No.3 as per drawing /sample

Tension Pulley ID = 100 mm, OD = 450mm, Thickness = 101 mm, provided with 8 Nos. Holes of 5/8” at PCD 230 mm. Material – S.G. IRON 700/ II Grade. As per drawing / sample

Guide Pulley ID = 100 mm, OD = 450mm, Thickness = 101 mm, Material – S.G. IRON 700/ II Grade . As per drawing / sample

Complete Submerged pulley which includes following PULLEY ID = 140 mm, OD = 450mm, Thickness = 101 mm, Material – S.G. IRON 700/ II Grade. Approx. weight -51kg. As per drawing / sample AXLE Length = 197.8 mm , OD= 80mm, Material = EN-8. Fitted with Bearing No. 6216RS (2 Nos). Approx. weight - 8.46 kg. As per drawing / sample END COVER ID=125mm, OD=210mm, Material = EN-8. Approx. weight - 3.26 kg. As per drawing / sample END COVER ID=82mm, OD=200mm, Material = EN-8. Approx. weight - 5.40 kg. As per drawing / sample BUSH 38.55x130, Material : MILD Steel-IS 2062 Approx. weight - 10.17 kg. As per drawing / sample

Output Coupling for belt conveyor system of BAH GEARED COUP. MULT CROWNED

ED 500/FGC-3, DG BORE DIA. Ø 70 K7 K/W P9 & DN BORE DIA. Ø 70 K7 K/W P9,

ED 1000/FGC-4, DG BORE DIA. Ø 85 K7 K/W P9 & DN BORE DIA. Ø 90 K7 K/W P9

ED 1000/FGC-4, DG BORE DIA. Ø 70 K7 K/W P9 & DN BORE DIA. Ø 90 K7 K/W P9

ED 1000/FGC-4, DG BORE DIA. Ø 75 K7 K/W P9 & DN BORE DIA. Ø 90 K7 K/W P9

ED 1000/FGC-4, DG BORE DIA. Ø 70 K7 K/W P9 & DN BORE DIA. Ø 70 K7 K/W P9,

ED 1000/FGC-4, Pilot Bore

ED 1600/FGC-5, DG BORE DIA. Ø 90 K7 K/W P9 & DN BORE DIA. Ø 90 K7 K/W P9,

GEARED COUP. MULT CROWNED ED 1600/FGC-5, Pilot bore

Hot Dipped Galvanised weld ment assembly of gear reducer of CT Fans, as per sample

U-Bolt with two nos. nylock nut and Washer, (SS-304), as per sample

Thru Bolt with one no. Nylock Nut and Washer, (SS-304), as per sample

SBS ENGINEERING CONCERN

SIGMA AGRO

M/s Vijay Engineering Company

M/s GANESH FABRICATORS

SIGMA AGRO