REPAIR AND MAINTENANCE OF FLOORING, TILING, JOINERY AND OTHER MISC B/R WORKS AT 60 MED REGT, DUNDAHERA MIL STN, GURGRAM AND MANESAR ARMY CAMP IN THE AREA OF AGE B/R-II UNDER GE (SOUTH) DELHI CANTT-10

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for light shade ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in floors etc laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

M&L for light shade ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in skirting etc laid over and including 10mm thick cement plaster in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

M&L for coloured glazed printed ceramic tiles in vertical surface 200x300x7mm thick laid over and including 10mm thick cement plaster in CM 1:4 set and jointed in neat cement slurry and pointed in white cement with pigment to match the tiles incl Rendering 10mm thick in cement mortar (1:4), complete all as specified and as directed.

S&F in repairs, mixing valve 15mm dia,Hot& cold CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin , including fittings complete all as specified and as directed.

S&F in repairs, wall mixing valve 15mm dia Hot& cold CP brass fancy with L-bend including joints to steel pipe or unions , including fittings for, complete all as specified and as directed.

S&F in repairs, sink mixing valve 15mm dia Hot&cold CP brass fancy including joints to steel pipe or unions , including fittings for, complete all as specified and as directed.

S&F in repair ss towel Rack fixed with sutable screw complete all as specified and as directed.

S&F in repairs of plastic WC seat cover fo white/ off white closed pattern with flat bottom end cover and mild steel CP hinging device complete all as specified and as directed.

S&F in repairs, CP brass health faucet alongwith 1.00 to 1.50 meter good quality SS flexible connection pipe suitable for 15mm bore pipe, complete all as specified and as directed.

S&F in repair Vitrous china wash hand basin white, ovel type over counter Wash hand basin size 550x 420mm, including necessary waste pipe and PTMT waste coupling, Fixing in Granite countern complete all as specified and as directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) , white/ off white, complete all as specified and as directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S&F in repairs, PVC valveless, syphonic action type, flushing cistern of 10 Ltr capacity, low level, white, with inlet, ball valve, float and handle, one number PVC connection, with brass nuts including PVC 'L' bend pipe fitted to WC and brackets to fix the flushing cistern with wall, complete all as specified and as directed.

S&F in repairs, PVC waste pipe 32mm bore, 65cm long plain/ corrugated including suitable adopter,complete all as specified and as directed.

S&F in repairs, PTMT grating dome 125 mm dia of best quality (minimum weight 40gm), complete all as specified and as directed.

S&F in repairs, Brass chromium plated shower rose 125mm size with arm, complete all as specified and as directed.

S&F in repairs, PTMT waste coupling 32 mm dia suitable for wash hand basin or kitchen sink, complete all as specified and as directed.

S&F in repairs PVC trap/floor trap with grating including jointin to wasted pipe in run lead, dia of outlet 75mm in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S&F in repair 15 mm angle valve / stop cock chromium plated, cast copper alloy screwed down high pressure fancy type, chromium plated with long shank and cup (concealed type) screwed for both ends for iron or for unions complete all as specified and as directed.

S&F in repair bib taps long body 15mm bore, chromium plated cast copper alloy, fancy screwed both ends complete all as specified and as directed.

S&F in repairs, PVC connection 15mm size with brass nut of length 450 mm for hot water pipe,complete all as specified and as directed.

S&F in repair toilet paper holder of brass chromium plated fixed to walls with CP brass screws, complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for 15mm thick rendering with ready mix plaster on faces of brick or concrete surface, finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for 10mm thick rendering with ready mix plaster on concrete surfaces of ceiling, chajja,etc finished even and smooth, complete all as specified and as directed. Note for srl item No 27 & 28 :- (i) Make : Birla Aerocon / Ultra radiplast / ACC Acoplast. (ii) The contractor shall submit original purchase voucher before claiing the RAR/Bill.

M&L for preparation of newly plastered surfaces of wall and applying 3mm thick wall care putty on whole surfaces to achieve smooth, even and uniform surface including grinding with sand paper and levelling of surface and applying two coat of oil bound distemper on white or tinted over existing prepared putty base surface, complete all as specified and as directed.

M&L for preparation of newly plasered surfaces of ceiling and applying three coat of white wash, complete all as specified and directed by engineer-in-charge.

Dismantling stone slabs and tiles of any discription or thickness in floors, aprons etc, laid bedded and pointed in any mortar, complete all as specified and as directed.

M&L for udaipur green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over and including 20mm thick cement screed bed (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and as directed.

M&L forn machine cut kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and as directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames), complete all as specified and directed by engineer-in-charge.

Taking down chowkats with shutters exc 1.5 Sqm each but n.exc 4 Sqm each (without taking off shutters from the frames), complete all as specified and as directed.

Taking down shutter of any descreption exc. 1.00 sqm but not exc. 2.00 sqm each, complete all as specified and as directed.

S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

S&F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed by engineer-in-charge.

S&F factory made solid PVC chowkhat/ door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed PVC sheet reinforced with 19mm x 19mm MS square tube of 19 gauge including rubber gasket, PVC fastners, screws, brackets, and shown on drawing as per SSR part-II (2020), complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain printed moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and as directed.

S&F 35 mm thick Factory made IInd class hardwood plain,framed paneled shutters (any numbe of panels) with lock rail and panel of 9mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003 (part) Kiln seasoned and chemically pressure treated, complete all as specified and as directed.

S&F 30 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 35 mm thick factory made IInd class hard wood glazed and Skelton shutters (three panels) open rebated and prepared to receive glass/ gauge etc. divided into squares edges of framing plain, chamfered or rounded mitered and rebated sash bar any number with cut or mitered beads for securing glass/ gauge etc. size of members of shutters, complete all as specified and as directed.

S&F stainless steel butt hinges, size 100 mm complete, complete all as specified and as directed.

S&F stainless steel barrel tower bolts, 150 mm long, complete all as specified and as directed.

S&F stainless steel handles, 150 mm long, complete all as specified and as directed.

S&F stainless steel sliding door bolts 250mm long with hasp, staple (bolt type) fixing clips of sheet cast, fixing bolts, complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cms width or girth and apply two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

S&F stainless steel wire cloth, 0.63mm nominal dia or wire and sqm average width or aperture 1.40mm, fixed with tinned tacks or galvanized wire staples to doors/steel windows, complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed.

M&L for 18mm thick wood plastic composites (WPC) board, fixed with screws as in cupboard/ wardrobe/ almirah shutter including all necessary fittings and fixtures like nickle plated clip hinges, knobs etc complete all as specified and as directed. Note: (a) Pattern & design of WPC board to be decided by GE. (b) Items like cupboard knobs, and CP plate clip hinges deemed to be included in the quoted rate.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws, PCC 1:2:4 for holefast compaction confirming to Fe.290.Gde-E-165, complete all as specified and as directed.

S&F in repair drapery curtain rods, stainless steel 25 mm dia of approved quality with decorative wooden finish and two number brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod including 8 Nos (min) match up rings etc., complete all as specified and as directed.

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

RADHEY CONSTRUCTION

verma enterprises

R.P Builders

M/S Parmod Johar

MOHIT ENTERPRISES

M R INTERIOR HUB

ramveer Singh