Providing Black Top Road from L and T Chhak to New Time Office at Bhubaneswari OCP under Jagannath Area. (Re-tender/2nd call).

Amount

Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density in accordance to Table No. 400-12, 400-13 and as per clause of section 406 of specifications

Prime coat Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per clause 502 of specifications.

Bituminous Macadam Providing and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction and as per clause 504 of specifications. Using Batch Mix Plant of appropriate capacity and Paver finisher : for Grading II (19 mm nominal size) bitumen content 3.4%

Tack coat Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.2kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications.

Providing, laying and rolling of 20mm thick Mix Seal Srufacing Type -A composed of crusher broken hard granite stone chips of sizes 11.2mm to 0.09 mm @ 0.27 cum and specified grade bitumen (VG-30) @ 22 Kg per 10 sqm of road surface laid to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in hot mix plant, laying by paver finisher and rolling with smooth wheeled roller 8-10 tonne capacity as per MoRT&H specifications clause 512 in all respects.

Supplying and stacking good quality moorum at work site with all lead and royalty, all complete.

Spreading moorum/sand/ stone dust etc. in layers not exceeding 150mm in thickness, levelling to required gradient and camber, watering and consolidation of each layer with vibratory roller (Payment to be made for compacted volume of moorum/sand).

Total impact of GST for the purpose of CTC

M/S. JAY MATA JI TRADERS

M/S. JITENDRA KUMAR PRADHAN