Providing fencing and view cutter at the boundary wall along Pailipada and South side inside BARC, Trombay, Mumbai

Amount

Providing and fixing SS concertina coil of 600/610mm dia. made from 304 grade Stainless steel with 2.50/2.60 mm SS wire and barb sheet of 0.5 mm thickness (Fish Hook Razor), SS strip barb width of 31mm and each barb length of 60 mm and uniform gap between sharp barbs is 100 mm , 50 spirals stretching the coil to 6 m with approximate weight 9-10 Kg per coil ( No of SS clips per coil is 125 and no of SS clips per Spiral pair is 5 nos), fixing the coil with clips between "Y" armed and MS angle posts / RCC post 2.50 -3.00 m high from ground level, including supplying and fixing suitable clips etc. complete as per manufacturer's specification and as directed by the Engineer-in-charge. Note: Bidder shall obtain approval of Engineer in charge before procurement of materials with necessary test certificates.

Stainless steel Barbed wires using SSl 304 Grade over RCC post/ M.S angles placed at required distance, using Stainless steel 304 Grade" J" hook or binding wire tied to 6 mm bar nibs fixed while casting the post etc. complete as directed by the Engineer-in-charge. (cost of RCC posts, struts, earth work and concrete to be paid for separetely) : Payment to be made in weight for total length of barbed wire used only.

With Stainless steel 304 grade barbed wire 12 swg ( 2.50mm 2 ply line wire & barbs with 2.50 mm thick wires. Complete as per IS 1278.

Providing and applying 2 or more coat of aluminium paint of approved brand on the steel surface including scaffolding complete all as per specifications and as directed by Project Engineer

Providing and fixing SS-304 grade crimpnet mesh of size 25mm x 25mm and wire diameter upto 3mm on existing structural steel members by using SS-304 grade flats/angles etc including all welding,SS bolting, buffing etc. complete at all levels and locations as directed by the Engineer-in Charge complete

Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under relevant item)Note : ACMP shall be measured to the actual visible area of the ACP sheet including silicon joints as fixed on site.

Providing and fixing 304 grade Stainless Steel pipes of approved size and make and quality by cutting and placing in position including embedding if necessary complete as per specification and as directed by the Engineer in charge

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge

Up to and including 300 mm Joists, 350 mm channels, and below sections using materials of approved manufacturers. All test reports to be provided along with the supply of the materials.

Providing and painting old walls (TWO coats) over existing cement paint surface on plain / sand face plaster & concrete surfaces with premium acrylic smooth exterior paint of approved make, required shade, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

Demolishing Stone rubble masonry (In cement mortar) manually / by mechanical means carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels

Providing and constructing Random Rubble masonry using approved Rubble stone in super structure (above plinth) in C.M 1:6 (using crushed sand) including raking out joints or simultaneous flush pointing above ground level / plinth level and up to and including 20 m height including scaffolding, curing etc. complete as per drawings and specifications.

Dismantling barbed wire / flexible wire rope in fencing including making rolls and stacking within 100 m lead

Dismantling steel work in single sections including dismantling and stacking within 100 m lead In R.S Joists, Angles etc.

Providing , centering ,shuttering Form work using PVC film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels

For Super Structure

Removing/dismantling chain link mesh from the existing chain link fencing including providing necessary scaffolding, removing C.I. hooks, nuts, bolts, washers, fixing rods etc. making into rolls, transporting the dismantled materials to the Divisional stores & stacking as per direction of Engineer-in-Charge

Extra for galvanizing minimum 80 micron thick galvanised coating on structural steel work including all charges etc. as directed by the Engineer-in-charge.

Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge

Providing and injecting non shrink grout of approved quality or product meeting technical specifications including mixing , pouring, curing as per manufacturer specifications, including scaffolding shuttering etc complete all as per specifications and as directed by Engineer in charge

Providing Raised and cut pointing on stone with cement mortar 1:3 using crushed sand as per specifications and as directed at site by the Engineer-in-charge.

Designing, pre fabricated awing fixed and folding type of approved make manually operated.

Fixed Awnings:- Fixed Awnings that are custom fit for window or door openings. All of them are manufactured with welded powder coated steel frames and weather resistant durable fabrics. (For measurement purpose two feet extra in both the direction to be consider for payment purpose from actual size of awing)

Removing white or colour wash, distemper, external paint by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as directed at site including scaffolding, cleaning of the areas.

Providing, applying one coat of primer with ready mixed red oxide primer of approved brand and manufacturer on steel works including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

TECHNOCRATS SECURITY SYSTEMS PVT LTD (BID ID -3288532)

Arathi Electricals (BID ID -3297819)

RESHMA CONSTRUCTION (BID ID -3297763)

SUNIL CONSTRUCTION (BID ID -3297181)