Renovation of Seminar Hall or Auditorium of C, D and E-Block

Amount

Providing and fixing Roller blinds with cassette and plastic chain of shade ECO Blackout/Sunscreen Classic/Sunscreen Efficiency/Designer Translucent/Texture Blackout and as per the direction of engineer in charge. Note: Agency will have to provide and fix roller blinds from any of the shades mentioned in these items as per of engineer in charge.

Providing and fixing frame work for partitions/ wall lining etc. made of 50x25x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge.

Providing & fixing of polyestyrene acoustical wall panels of 12 mm thickness chemphered /square edge in required profile, the panels are manufactured from 100% Polyethylene Terephthalate (PET) having system NRC of 0.90 and density of 180Kgs/m3. panels should be fire resistant as per B1 Class A. The panel to be glued over 8 mm thick perforated calcium silicate tile of 595 x 595mm (having perforations of 8/10mm dia) which is fixed over 50mm GI framework consisting of 48x36x34x0.5mm thick GI Studs wall channels & 50x35x35x0.5mm floor channels @ 600mm c/c. The cavity of GI framework should be inserted with thermaly bonded polyester fibre of 50mm thick 1000 GSM density for better insulation. The polyestyrene panels in different colors can be cut in shapes as per the design drawings. The panels to be pasted on the perforated calcium silcate tile with SR adhesive. The work to be done complete as per the design & instructions of engineer incharge including all accessories/hardware as required.

Taking out old Auditorium chair by opening the fastner and placing at suitable place within 20 m lead, opening of existing fabric then replacing with new approved fabric with 3mm thick foam adhesive and stiching etc as required and refixing the chair in position with new fastner, allen bolt size 25mm, 75mm and complete as per direction of Engineer-in-charge

Taking out old Calcium Silicate tile,stacking at site within 50 m lead and Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level as per list of Aerolite or equivalent make.Complete in all respect as per direction of engineer-in-charge.

Providing and fixing 52 mm min. composite thick ,single /double leaf,non metallic,asbestos free and smoke check shutters of approved make,120min. Fire resistance rating conforming to BS: 476 PART22,IS:3614 PART II and as per prototype tested and certified at CBRI rorkee, suitable for mounting on door frames .the shutter comprises of two non combustible boards,sandwitcing fire resistant filler,with commercial ply facing on both sides including 1mm thick laminate in desired shade with 12 mm thick exposed teakwood lipping alround the shutters with heat activated intumescent fire seal strip of required size mounted in grooves in the shutters except bottom with 4 no. -100x 75 mm, 2.5 mm thick ss ball bearing hinges,with vision panel of size 200x300xmm fitted with 6 mm thick indian wired glass of 120 min. fire rating in each shutter including ISI marked door closer for each leaf , 6 lever mortice lock with ss lever handle(doorset or equivalant)

Supply and fixing of 2nd class teakwood door frame of section 145 mm x 70 mm with heat activated in tumescent fire seal strip of section 20 mm x 4 mm and frame will be finish by fire retardant polish clear. Frame will be fixed in existing opening with dash fastener of appropriate size 120x10mm (Payable in spare item) as per direction of Engineer in Charge. Door Frame 2 hr. fire door

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge 10 x 120 mm

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross- T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately). 12mm thick high density high moisture resistant board(HDHMR) (EG)SL

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 'Group C

Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. '3 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. '6 x 1.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. '3 x 4 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. '6 x 4 sq. mm

Supplying and drawing following pair 0.5 mm dia FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 4 Pair

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. '20 mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. '25 mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. '20 mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. '25 mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. '5/6 amps switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. '15/16 amp switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. '3 pin 5/6 amp socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. '6 pin 15/16 amp socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. '1 or 2 Module (75mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. '3 Module (100mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. '4 Module (125mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. '6 Module (200mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. '8 Module (125mmX125mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. '12 Module (200mmX150mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. '1 or 2 Module

'Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. '3 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. '4 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 6 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 8 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 12Module

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. '1 run of cable

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. '2 run of cable

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. '3 run of cable

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole

Supplying and fixing 400mm sweep 230 volt 50 HZ. Wall bracket fan with oscillating arrangement etc, as required.

Supplying and fixing the following ms flexible pipe complete with accessories etc. as required. 25mm size

Supply, installation, testing and commissioning of 34 W- 36 W recessed type made of CRCA housing, cool day light 5700/6500 K, full glow LED panel of size 595 mm X 595mm (nominal Size), having minimum system lumen out put of 3600 lumens minimum system efficacy of 100 Lumen/Watt, power factor >0.90, CRI>80, THD<10 with APFC isolated driver with efficiency of >85% serge protection >2 KV operating voltage 150 to 270 volt, 50 Hz A.C. Supply. Complete with all accessories as per specifications to be fixed in existing calcium silicate/ Gypsum false ceiling, tightening with suitable M.S. Chain suspension arrangement. LED Chip make- Cree, Nichia, Philips, Lumiled, Osram, Edison, Seoul, Bridge lux, Luminare shall be complying to LM80 Report from LED manufacturer for 50,000 Burning Hrs and LM-79 Report from NABL accredited lab, connection with 3x1.5 sqmm FRLS PVC conductor wire etc, complete as required.

Supply, installation, testing and Commissioning of 18W- 22Watt LED light 4 feet Batten Luminare having minimum system Lumen output of 2000 Lumens, minimum system efficacy of 100 Lumen/Watt, Colour temperature (5700 K to 6500K) in Cool day light, extruded Aluminium housing, Power factor >0.90 CRI>80, THD(%)<10 with APFC isolated driver with efficiency of >85% Surge protection >2KV, operating voltage 150-270 50Hz A>C. With LED chip make : Cree, Nichia, Philips, Lumiled, Osram, Edison, Seoul, Bridge lux, luminaries shall be complying to LM80 Report from LED manufacturer for burning life of 5,0000 Hrs and LM-79 Report from NABL accredited lab, connection with 3x1.5 sqmm FRLS PVC conductor wire etc complete as required.

Supplying, installation, testing and commissioning of 12W – 15 Watt back-lit LED light surface mounted fitting in square shape in Aluminium heat sink/housing (300 mm x 300 mm nominal size) having minimum system lumen out put of 1200 lumens, minimum system efficacy of 80 lumen/Watt, Colour temperature 5700K/6500K in Cool Day light. Power Pactor >.90, CRI>80, THD(%)<10 with APFC isolated driver with efficiency of >85%, surge protection >2 KV, operating voltage 150 to 270 volt, 50 Hz A.C. supply to be fixed direct on the wall/ceiling with all accessories as per specifications. LED Chip make: Cree, Nichia, Philips, lumiled, Osram, Edison, Seoul, Bridge lux, Luminare shall complying to LM80 Report from LED manufacturer for burning life of 50,000 Hrs and LM-79 Report from NABL accredited lab, connection with 3x1.5 sqmm FRLS PVC conductor wire complete as required.

Supplying, installation, testing and commissioning of 10 W- 12 W round recessed type LED Down Lighter having minimum system Lumen out put of 900 Lumen and minimum system efficacy of 100 lumen/Watt in die cast Aluminium heat sink/housing, Colour temperature (5700K to 6500K) power factor >.90, CRI>80, THD<10 with APFC isolated driver with efficiency of >85% surge protection>2 KV, Suitable for operation on 150 to 270 volts, 50 Hz A.C. complete with all accessories as per the specifications in the existing cut out of size 165 mm dia in Gypsum false ceiling and repair of false ceiling/gypsum/calcium silicate etc if any for fixing. LED Chip make- Cree, Nichia, Philips, Lumiled, Osram, Edison, Seoul, Bridge lux, luminare shall be complying to LM80 Report from LED manufacturer for burning life of 50,000 Hrs and LM-79 Report from NABL accredited lab, connection with 3x1.5 sqmm FRLS conductor wire etc, complete as required.

Supplying, installation, testing and commissioning of DALi Controller of DIN-rail mounted DALi control Module for DALi-compliant digital addressable loads, it shall provide DALI bus power and control for Minimum two independent DALI loops with up to 64 ballasts each, Each DALI bus can control a maximum of 16 zone, total capacity of upto 64 DALi Driver etc, complete as required.

Supplying, installation, testing and commissioning of 6 button touch keyboard with backlit technology complete with metal finish and provided with DALi communication module for controlling DALi Fixture, storing scenes etc, complete as required.

Supplying, installation, testing and commissioning of recessed type 30 W to 36 W aluminium extruded recessed luminare LED panel with DALi dimmable driver fitting of size 595mm X 595mm (nominal) suitable for existing calcium silicate false ceiling with MS powder coated CRCA Housing, the total lumen of LED fitting should be 3600 or above in CCT 4000K, Power factor power factor >.95, CRI>80, LED complete with all accessoies including connection etc as required and as per direction of Engineer-in-Charge

Supplying, installation, testing and commissioning of recessed type 12 W-15 W LED panel with DALi dimmable driver deep recessed downlighter with pressure dia cast aluminium housing with faceted mirror reflector with a nominal system lumen output of 1500 lumnes and a nominal system efficacy of 110 lm/W. The luminare shall have a rated system lifetime of 50000 burning hours at L70B50. The luminaire should have a color temperature of 4000K, SDCM<5, CRI>80, UGR<19. The luminare shall meet IP 20 rating with dimmable version. The fixture should comply with the parameters as per ISI0322. The LED driver should be as per BIS approved etc as required and as per direction of Engineer-in-Charge

Dismantling existing various type of light fittings/ ceiling fans/wall fans including disconnections etc complete as required

Supplying and installation of ISI mark heavy duty exhaust fan of following sweep 230 volt 50 HZ 1400 RPM complete with blade, leg guards, rubber pads, louver etc. in the existing opening including connections, testing etc. as required. '300 mm sweep

Supplying and fixing of 250 mm sweep, Fresh Air Ventilating fan in plastic body complete with blade, louver etc suitable for 230V A.C. supply, on existing opening including making connection etc. as reqd.

Supplying, Installation, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor having high performance, non regulating programmable type, suitable for connected load upto 10Amp, for mounting height upto 2.8 mtr and for 5 metre diameter coverage area along with necessary fixing arrangement including programming at site etc complete as required

Supplying, Installation, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor with day light dimming (lighting level shall be regulated as per availablity of natural day light in an area along with occupancy detection.) having high performance, regulating programmable type, suitable for connected load upto 10Amp, for mounting height upto 2.8 mtr and for 5 metre diameter coverage area along with necessary fixing arrangement including programming at site etc complete as required

Supplying, Installation, testing and commissioning of Microwave technology based occupancy sensor having high performance, Non regulating programmable type, suitable for connected load upto 10Amp, for mounting height upto 2.6 mtr and for 5 metre X 20 M coverage area along with necessary fixing arrangement including programming at site etc complete as required

Credit Items: Taking away the existing material as credit item on buy back basis as required. Credit Item on account of old material Fittings / Downlighters

Credit Items: Taking away the existing material as credit item on buy back basis as required. Credit Item on account of old material Wire/Conduit etc

Credit Items: Taking away the existing material as credit item on buy back basis as required. Credit Item on account of old material Switch & Socket with plate/Industrial Socket/Fan regulator with switch plate

Credit Items: Taking away the existing material as credit item on buy back basis as required. Credit Item on account of old material Switch /Socket/ Switch Plate

Credit Items: Taking away the existing material as credit item on buy back basis as required. Credit Item on account of old material Ceiling Fan/Wall fan/Exhaust Fan

GEETANJALI FURNISHERS PVT LTD

AASTHA CONTRACTS INDIA PVT LTD