SPECIAL REPAIR TO ROOF SHEET AND FALSE CEILING OF BLDG NO A/4/135, PROVN OF CONCRETE PEDESTAL AT CORPS HQ AND PROVN OF EXHAUST FANS FOR KITCHEN OF MD ACCN AT KARAM SINGH ENCLAVE UNDER GE PANAGARH

Amount

Dismantling of Asbestos cement (corrugated, semicorugated) sheet in roof covering complete all as specified and directed.

S&F Pre-painted galvatume aluminum zinc coating @150GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridges fixed with self tapping screws complete all as specified and directed.

M&L for flat iron fillets (for securing wire mesh, CGI Sheets etc.), Hand rails, half round or other steel section including embeding in concrete and screwing etc, wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F MS flat iron as in hold fast clamps small articles conforming to Fe 290 GDE-E-165 complete all as specified and directed.

Dismantling of wall or ceiling boards of any thickness including cover fillets complete all as specified and directed.

S&F 6mm thick (non asbestos fiber) designer building boards fixed in aluminium frame work in ceiling flat or sloping with screw complete all as specified. including 605mm x 605mm Anodised aluminium snap grid frame work for false ceiling with all necessary aluminum angle & Tee arrangement with and incl fixing cleats screws etc along with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40mm x 3 mm complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position complete all as specified and directed.

S&F roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old steel surfaces of any description over 10cm in width or girth not otherwise described incl preparation of surfaces complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surfaces of any description over 10cm in width or girth not otherwise described incl preparation of surfaces complete all as specified and directed.

Excavation in trenches in soft/loose soil n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and getting out complete all as specified and directed.

Removing surplus excavated spoil/earth to a distance n.exc 50M and deposited where directed at a level n.exc 1.5 M above the starting point complete all as specified and directed.

Returning filling in soft /loose excavated soil including spreading leveling watering and well ramming in layers n.exc 25 CM complete all as specified and directed.

M&L for hardcore of broken stone or boulder of gauge exc 63mm but n.exc 75 mm deposited, spread & leveled in lyers n.exc 15 cm thick watered & rammed to a true surface complete all as specified and directed.

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) as foundation and mass filling complete all as specified and directed.

M&L for M-25 (Design Mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for M-25 (Design Mix) using 20mm graded stone aggregate Columns, pillars, piers, posts and struts complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface of concrete complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface of concrete complete all as specified and directed.

M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for 18-20 mm Granite work (table rubbed and polished) for wall lining (veneering to wall) over 15mm thick screed bed in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Dholpur stone with hammer dressed facework (with maximum depression from a straight edge held against the dressed surface not exc 20mm), about 40mm high, 75mm deep in straight courses, laid and jointed in cement and stone dust mortar 1:3, recess pointed (10mm x 20mm) with an admixture of white cement and Dholpur stone dust 1:1 complete all as specified and directed.

M&L for 15mm thick in CM 1:4 rendering on brick or concrete surfaces finished even and smooth with integral water proofing compound (IWPC Measured and paid separately) on wall complete all as specified and directed.

Supply only intergral water proofing compound (liquid admixture) complete all as specified and directed. (Makes : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)

M&L for preparation of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

M&L for point wiring for one fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including suitable size PVC casing and caping with suitable PVC switch boxes including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall /ceiling with 1.5 Sqmm PVC FRLH insulated unhealth multi stranded copper conductor cable as earth continuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated while/coloured top sheet cover 3mm thick including making good all disturbed surfaces to match the existing complete all as specified and directed.

M&L for point wiring for light point/ fan point one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

S&F switch piano flush type, 240 Volts, 5 Amps, SP, one way complete all as specified and directed.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.

S&F metalic exhaust ventilation fan with louvers of sweep 300mm, 230 volts, with blade and frame and louver steel body marked complete all as directed by Engr-in-Charge.

M&L for cutting holes (round type) into or through brick walls built in cement mortar of cement line mortar and stone walls built lime mortar or wall of lime concrete suitable for exhaust fran 300 mm sweep including making hole finished with bricks, plaster and distempering complete all as specified and directed.

HIGH HILLS INFRA

M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION

RUBY BUILDERS AND CONSTRUCTION CO

SANJAY KUMAR SUPAN

M/S SWAPAN KUMAR MONDAL

M/S Ali Trading Co

SARASWATI ENTERPRISE (INDEX NO CEEC D-81)

M/S N B SEN CONSTURCTION

SINGH CONSTRUCTION

BHARAT CONSTRUCTION