Construction of Chapter Building for ICMAI (The Institute of Cost Accountants of India) Building at Chandigarh

SUMMARY OF BILL OF QUANTITY FOR THE CONSTRUCTION OF INSTITUTE OF COST & WORKS ACCOUNTANTS BUILDING AT MOHALI , PUNJAB

Items Based on Items Based on

Sr. Items Based on

Description DSR-2023 (Civil DSR-2025 (E&M Total Remarks

No. Market Rates

MAIN BUILDING W X Y

2 CENTRING AND SHUTTERING 1,780,702.00 1,780,702.00

6 FALSE CEILING 713,690.50 713,690.50

9 PAINTING AND FINISHING 877,814.00 877,814.00

11 STEEL AND IRON WORK & MISC 4,546,578.00 4,546,578.00

12 EXTERNAL CIVIL WORKS 1,610,495.78 1,610,495.78

13 Exterior Facades 2,237,701.35 2,237,701.35

B MEP ( SERVICES+ LIFTS)

ELECTRICAL WORK

2 POINT & CONTROL WIRING IN PVC CONDUIT, ETC. 879,743.00 - 879,743.00

3 LIGHT FIXTURES AND FITTINGS, CEILING FANS, SENSORS ETC. 47,572.00 87,300.00 134,872.00

4 MEDIUM VOLTAGE PANELS - 445,000.00 445,000.00

5 DISTRIBUTION BOARDS & MINIATURE CIRCUIT BREAKERS 79,353.00 - 79,353.00

6 LT CABLES, TERMINATIONS, & CABLE TRAYS ETC. 166,991.00 - 166,991.00

9 LIGHTNING PROTECTION SYSTEM 68,136.00 - 68,136.00

10 SAFETY EQUIPMENTS FOR ELECTRICAL INSTALLATION 1,890.00 7,700.00 9,590.00

Items Based on Items Based on

Sr. Items Based on

Description DSR-2023 (Civil DSR-2025 (E&M Total Remarks

No. Market Rates

12 WATER SUPPLY PUMPS AND ACCESSORIES / EQUIPMENT'S 5,320.00 40,000.00 45,320.00

FIRE FIGHTING SYSTEM

13 FIRE PUMPS & RELATED EQUIPMENT / ACCESSORIES - - -

14 INTERNAL & EXTERNAL HYDRANT SYSTEM - - -

15 FIRE EXTINGUISHERS 56,536.74 - 56,536.74

16 SPLIT AC & ASOCIATED WORKS - 299,220.00 299,220.00

17 WATER COOLER & RO SYSTEM - 80,000.00 80,000.00

21 PASSANGER LIFT - - -

22 SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM 271,400.00 - 271,400.00

23 EV CHARGING - - -

Add Multiplying factor of 0.973 on DSR 2023 ITEMS "A" 20,221,393.44

DETAILED BOQ FOR THE CONSTRUCTION OF INSTITUTE BUILDING AT MOHALI , PUNJAB

DSR-2023 Item Description of Items Total Amount

DSR-2023 Item Description of Items Total Amount

SN Quantity Units Rate (INR)

INTERNAL CIVIL WORKS

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over

areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting

out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc.

1.2 2.25 in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and 188.25 Cum 196.00 36897

watering, lead up to 50 and for all lift.

Total Earth Work 120433

2 CENTRING AND SHUTTERING

Shuttering for faces of Foundations, footings, bases of columns, etc. for mass

Centring and shuttering for Suspended floors, roofs, landings, balconies and access

Centring and shuttering for Lintels, beams, plinth beams, girders, bressumers and

2.4 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts

2.5 5.9.7 Centring and shuttering for Stairs, (excluding landings) except spiral-staircases

Total Shuttering 1780702

3 P.C.C. AND R.C.C. WORK

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from natural sources)

Design Mix Concrete

Providing and laying in position ready mixed or site batched design mix cement concrete for

reinforced cement concrete work; using coarse aggregate and fine aggregate derived from

natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to

improve durability and workability without impairing strength; including pumping of concrete to

3.2 5.33 site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering,

finishing and reinforcement as per direction of the engineer-in-charge, for the following

grades of concrete.:

Note: Extra cement up to 10% of the minimum specified cement content in design mix shall

be payable separately. In case the cement content in design mix is more than 110% of the

specified minimum cement content, the contractor shall have discretion to either re-design

the mix or bear the cost of extra cement.

3.2.1 5.33.1 All works upto plinth level

3.2.1.1 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum 67.78 Cum 9504.75 644191

3.3 5.33.2 All works above plinth level upto floor V level

3.3.1 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum

53.38 cum 9504.75 Digitally signed by AKSHIT

Priced BOQ-1 Date: 2026.08.271 13:18:35 IST

DSR-2023 Item Description of Items Total Amount

DSR-2023 Item Description of Items Total Amount

SN Quantity Units Rate (INR)

3.3.2 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum

3.3.3 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum

Total PCC and RCC work 3194120

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in all shapes and sizes in :

4.1.1 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry 100 mm/ 125 mm

thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in

4.2 6.38 super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4

coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars

at every third course of masonry work.

5 TERRACE WORK

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with

resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in

three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid

5.1 22.22A (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing

liquid (dry film thickness of complete application/system not less than 500 microns). The

operation shall be carried out after scrapping and properly cleaning the surface to remove

loose particles with wire brushes, complete in all respect as per the direction of Engineerin-

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C.

5.2 12.22 sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse 5.00 Each 298.25 1491

sand) and a coat of neat cement, rounding the edges and making and finishing the outlet

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C.

5.2 12.22 sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse 5.00 Each 298.25 1491

sand) and a coat of neat cement, rounding the edges and making and finishing the outlet

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone

5.3 12.21 aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 87.45 RM 305.15 26685

fine sand) as per standard design :

5.3.1 12.21.1 In 75x75 mm deep chase

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :

5.4 12.41 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap

for thermal expansion, (i) Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to IS

: 13592 Type A, including jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion.

Digitally signed by AKSHIT

Priced BOQ-2 Date: 2026.08.272 13:18:35 IST

DSR-2023 Item Description of Items Total Amount

DSR-2023 Item Description of Items Total Amount

SN Quantity Units Rate (INR)

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections

( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with

suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick

(minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made

of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm

center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm

and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of

5.8 12.52 the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm

and laying false ceiling tiles of approved texture in the grid including, required cutting/making,

opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T”

runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm

fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods

with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to

center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted

with polyester paint, all complete for all heights as per specifications, drawings and as

directed by Engineer-in-charge.

12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of

Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and

laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron

metalized polyester on the back side with all edges sealed with the face side PVC film which

goes around and wraps the edges and is bonded to the edges and the back side metalized

polyester film so as to make the tile a completely sealed unit.

Providing and laying integral cement based water proofing treatment including preparation of

surface as required for treatment of roofs, balconies, terraces etc consisting of following

operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed

with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge

over the RCC slab including adjoining walls upto 300 mm height including cleaning the

surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25

mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with

water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over

20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water

proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required

slope and treating similarly the adjoining walls upto 300 mm height including rounding of

junctions of walls and slabs. (c) After two days of proper curing applying a second coat of

5.9 22.7.1 cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound 182 sqm 1684.60 306783

conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with

20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water

proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including

laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the

surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm

deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of

two weeks for curing and for final test. “All above operations to be done in order and as

directed and specified by the Engineer-in-Charge”:

22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Digitally signed by AKSHIT

Priced BOQ-3 Date: 2026.08.273 13:18:35 IST

DSR-2023 Item Description of Items Total Amount

DSR-2023 Item Description of Items Total Amount

SN Quantity Units Rate (INR)

12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre

conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4

mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven

tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm

resin bonded glass wool backing.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand

and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic

5.11 21.18 floor spring type fixing arrangement and making necessary holes etc. for fixing required door 5.00 sqm 5325.90 26630

fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper

etc.to be paid separately).

6 FLOORING & DADO

40 mm thick marble chips flooring rubbed and polished to granolithic finish under layer 34

mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5

mm nominal size) and top layer 6 mm thick with white, black, chocolate, grey, yellow or green

6.1 11 marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement marble powder mix 3:1

(3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7

marble chips) by volume, including cement slurry etc. complete :

6.1.1 11.9 Dark shade pigment with ordinary cement

Providing and laying Polished Granite stone flooring in required design and patterns, in linear

as well as curvilinear portions of the building all complete as per the architectural drawings

with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1

6.2 11.56 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement

slurry admixed with pigment of matching shade including rubbing , curing and polishing etc.

all complete as specified and as directed by the Engineer-in-Charge.

6.2.1 11.56.1 Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar

6.3 11.41A 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including

grouting the joints with white cement and matching pigments etc. The tiles must be cut with

the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier,

wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles

gently and easily.

6.3.1 11.41A.1 Double charge vitrified tile polished finish of size

6.3.1.1 11.41A.1.1 Size of Tile 600 x 600 mm

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set

6.4 11.43 tile adhesive (Water based) conforming to IS: 15477, in average 3 mm thickness. 263.26 sqm 753.25 198304

TOTAL FLOORING 1165965

7.1 13.1 12 mm cement plaster of mix :

7.1.1 13.1.2 1:6 (1 cement: 6 fine sand)

Digitally signed by AKSHIT

Priced BOQ-4 Date: 2026.08.274 13:18:35 IST

DSR-2023 Item Description of Items Total Amount

DSR-2023 Item Description of Items Total Amount

SN Quantity Units Rate (INR)

7.2 13.3 20 mm cement plaster of mix :

7.2.1 13.3.2 1:6 (1 cement: 6 fine sand)

7.3 13.3.2 1:6 (1 cement: 6 fine sand)

7.4 13.1.1 1:4 (1 cement: 4 fine sand)

Total Plaster 1238988

8 PAINTING & FINISHING

Providing and applying white cement based putty of average thickness 1 mm, of approved

8.1 13.8 brand and manufacturer, over the plastered wall surface to prepare the surface even and 3064.02 Sqm 156.05 478141

smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic

Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including

8.2 13.81.1 applying additional coats wherever required to achieve even shade and colour 3064.02 Sqm 62.70 192114

Old work (one or more coats)

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more

8.3 13.46.1 coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 1292.40 Sqm 160.60 207559

0.90 litre/10 sqm)

TOTAL PAINTING & FINISHING 877814

9 JOINERY WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames,

9.1 9.1 wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia

& length (hold fast lugs or dash fastener shall be paid for separately).

9.1.1 9.1.1 Second class teak wood 0.41 cum 142949.70 57895

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative

type, core of block board construction with frame of 1st class hard wood and well matched

teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of

9.2.1 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 31.00 sqm 3473.85 107689

9.3 8232 SS tower bolt (plate type) size 200x10 mm for Doors & Windows 14.00 each 93.00 1302

9.3 8232 SS tower bolt (plate type) size 200x10 mm for Doors & Windows 14.00 each 93.00 1302

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP

brass screws with concealed fittings arrangement of approved quality and colour.

450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88

mm, weighing not less than 170 gms

Providing and fixing aluminium extruded section body tubular type universal hydraulic door

closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg

to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with

necessary accessories and screws etc. complete.

Providing and fixing bright finished brass door latch with necessary screws etc. complete :

Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of

9.7 21.13 handles (best make of approved quality) for aluminium doors including necessary cutting and 8.00 each 528.85 4231

making good etc. complete.

Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of

9.7 21.13 handles (best make of approved quality) for aluminium doors including necessary cutting and 2.00 each 528.85 1058

making good etc. complete.

9.8 9.81 Providing and fixing bright finished brass handles with screws etc. complete: 29.00 each 265.65 7704

Digitally signed by AKSHIT

Priced BOQ-5 Date: 2026.08.275 13:18:35 IST

DSR-2023 Item Description of Items Total Amount

DSR-2023 Item Description of Items Total Amount

SN Quantity Units Rate (INR)

9.8 9.81 Providing and fixing bright finished brass handles with screws etc. complete: 2.00 each 265.65 531

Providing and fixing wooden moulded beading to door and window frames with iron screws,

9.9 9.40.1.1 plugs and priming coat on unexposed surface etc. complete :

2nd class teak wood

Providing and fixing double action hydraulic floor spring of approved brand and manufacture

conforming to IS : 6315, having brand logo embossed on the body / plate with double spring

mechanism and door weight upto 125 kg, for doors, including cost of cutting floors,

9.10 21.4.2 embedding in floors as required and making good the same matching to the existing floor 2.00 each 2966.10 5932

finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide

plate etc. complete as per the direction of Engineerin- charge.

With brass cover plate minimum 1.25 mm thickness

Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead

free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded

profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10

mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design

duly reinforced with galvanized mild steel section made of required shape & size as per

CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor

(where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade

fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide

PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic

9.11 9.147.A1 packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash &

mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at

all corners, including drilling of holes for fixing hardware and drainage of water etc. After

fixing frame the gap between frame and adjacent finished wall shall be filled with weather

proof silicon sealant over backer rod of approved size and quality, all complete as per

approved drawing conforming to CPWD specification & direction of Engineer-in-Charge.

Section of steel reinforcement and cross sections of uPVC profiles to be as per design

approved by Engineer-in-Charge.

Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon

rollers with SS 304 body.

Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high

performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231

shall be paid separately.

9.11.1 9.147.A1 Note:- Structural design proof checked from a Government Engineering Institute, to be

provided by the manufacturer for :

(i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3

(ii) Sites with structure height more than 20m for all wind speeds

Using R3 series with frame(98 mm & above) x (40 mm &above) & both glazed and fly screen

9.11.1. sash (30 mm & abpove) x (55 mm & above) with zinc alloy (zamak) powdre coated handle on

1 every glazed panel along with multi-point locking system (Height upto 1.8 m).

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat

15x3 mm and nuts & bolts complete.

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both

Digitally signed by AKSHIT

Priced BOQ-6 Date: 2026.08.276 13:18:35 IST

DSR-2023 Item Description of Items Total Amount

DSR-2023 Item Description of Items Total Amount

SN Quantity Units Rate (INR)

Supply and Fixing of Glass partition of 10mm Toughened Glass using slim line System-45 Frames clip

in profile to a height of maximum 3m or as per drawing.The Fixed glass to be fixed using BP45

Profiles at Top & Bottom & fixed frame cleat . The profile size to be 45x20MM to be fixed on to the

floor/ ceiling as per the architect design. H Junction profile to be used at all Glass to Glass vertical

joints, 90 Deg L Junction Profiles and T Junction profiles necessary as per design.In case of Glass

9.22 NS-1 overall panel MP45 & BP45 Overpanel Profile to be used. 8.52 sqm 5,728.94 48824.31826

The EPDM rubber shall be used for fixing glass of 10 mm .The Profile shall be matt natural anodized,

the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system.

All Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing.

Approved Manufacturer: Profiles/Frames: DORMA, Glass : Saint Giobain/Asahi Profile/frame: vertex

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and

manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring

NS-2 type fixing Glass Door handle one set and one no. lock for single glass door arrangement and making 7.20 sqm 8,024.06 57773.232

necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge

TOTAL OF JOINERY WORK 464319

10 STEEL AND IRON WORK & MISC

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

10.1 5.22A.6 position and binding all complete above plinth level. 39196.16 Kg 107.85 4227306

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c

10.2 10.28 fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel 413.35 kg 772.40 319272

bolts etc., of required size, on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of

stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,

fasteners etc.).

TOTAL STEEL AND IRON WORK & MISC 4546578

11 EXTERNAL CIVIL WORKS

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over

areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting

out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc.

11.2 2.25 in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and 37.61 Cum 196.00 7372

watering, lead up to 50 and for all lift.

Shuttering for faces of Foundations, footings, bases of columns, etc. for mass

11.4 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts 18.19 Sqm 961.30 17489

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from natural sources)

11.6 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum (upto Plinth) 4.41 cum 9504.75 41887

11.7 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum (Above Plinth) 2.09 Cum 9860.40 20630

Digitally signed by AKSHIT

Priced BOQ-7 Date: 2026.08.277 13:18:35 IST

DSR-2023 Item Description of Items Total Amount

DSR-2023 Item Description of Items Total Amount

SN Quantity Units Rate (INR)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

11.8 6.1.1 foundation and plinth in: 31.25 Cum 9105.95 284567

Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in all shapes and sizes in :

11.9 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 5.46 cum 10195.45 55646

11.10 13.3.2 20 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) 59.33 Sqm 450.00 26696

Providing and applying white cement based putty of average thickness 1 mm, of approved

11.11 13.8 brand and manufacturer, over the plastered wall surface to prepare the surface even and 118.65 Sqm 156.05 18515

smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more

11.12 13.46.1 coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 118.65 Sqm 160.60 19055

0.90 litre/10 sqm)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

11.13 5.22A.6 position and binding all complete above plinth level. 572.90 Qtls 107.85 61787

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity

after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating

with road roller including making good the undulations etc. and re-rolling the sub grade and

disposal of surplus earthwith lead upto 50 metres.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to

0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with

water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in

sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to

10 tonne capacity to achievethe desired density, complete as per specifications and

directions of Engineer-in-Charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement

concrete in position to the required line, level and curvature, jointed with cement mortar 1:3

(1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints

11.16 16.69 except at sharp curve shall not to more than 5 mm), including making drainage opening 29.82 Cum 10117.60 301697

wherever required complete etc. as per direction of Engineerin- charge (length of finished

kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone

shall be approved by Engineer-in-charge).

Providing and laying factory made chamfered edge Cement Concrete paver blocks in

footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness &

size/ shape, made by table vibratory method using PU mould, laid in required colour &

11.17 16.91 pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying

of inter locking paver blocks into the sand bedding layer through vibratory compaction by

using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size

and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-

60 mm thick cement concrete paver block of M-35 grade with approved colour, design &

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in

position and applying a priming coat of approved steel primer using structural steel etc. as

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

TOTAL OF EXTERNAL CIVIL WORKS 1610496

12 Exterior Facades

Digitally signed by AKSHIT

Priced BOQ-8 Date: 2026.08.278 13:18:35 IST

DSR-2023 Item Description of Items Total Amount

DSR-2023 Item Description of Items Total Amount

SN Quantity Units Rate (INR)

Designing, fabricating, testing, installing and fixing in position Curtain

Wall with Aluminium Composite Panel Cladding, with open grooves for

linear as well as curvilinear portions of the building , for all heights and all

Providing and fixing double glazed hermetically sealed glazing in aluminium windows,

ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air

12.2 21.10 gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant 441.52 sqm 4997.70 2206602

(Both primary and secondary sealant) etc. as per specifications, drawings and direction of

Engineer-in-charge complete.

Extra for openable side / top hung vision glass panels (IGUs) including providing and

supplying at site all accessories and hardwares for the openable panels as specified and of

the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone

12.4 25.4 locking sets with stainless steel plates, handles, buffers etc. including necessary stainless 8 3671.50 29372

steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural

drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100

12.5 21.12.2 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. 3 No 575.75 1727

Anodized (AC 15 ) aluminium tubular handle bar

Providing and supplying aluminium extruded tubular and other aluminium sections as per the

architectural drawings and approved shop drawings , the aluminium quality as per grade

6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns

12.6 25.1 conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in- 0.00 sqm 414.33 0

Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for

fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).

The weight of aluminium extruded section shall be taken for purpose of payment.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in

position and applying a priming coat of approved steel primer using structural steel etc. as

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Total for external Façade 2237701

Digitally signed by AKSHIT

Priced BOQ-9 Date: 2026.08.279 13:18:35 IST

BOQ OF PLUMBING WORKS FOR INSTITUTE PROJECT AT MOHALI

PUBLIC HEALTH WORKS

S.No. DESCRIPTION OF ITEM QTY UNIT RATE

Excavating trenches of required width for pipes, cables, etc including excavation for

sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including

getting out the excavated soil, and then returning the soil as required, in layers not

exceeding 20 cm in depth, including consolidating each deposited layer by ramming,

watering, etc. and disposing of surplus excavated soil as directed, within a lead of

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia 150.00 metre 140.00 21000.00

Painting (two or more coats) on CI/SCI rain water, soil waste and vent pipes and

fittings with black anticorrosive bitumastic paint of approved brand and manufacture,

over and including a priming of ready mixed zinc chromate yellow primer on new

3.1 100 mm diameter pipes 200.00 metre 23.00 4600.00

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over

4 a ready mixed priming coat, both of approved quality for new work :

4.1 15 mm diameter pipe 41.50 Metre 4.00 166.00

4.2 20 mm diameter pipe 2.50 Metre 5.00 12.50

4.3 25 mm diameter pipe 48.00 Metre 7.00 336.00

4.4 32 mm diameter pipe 50.00 Metre 9.00 450.00

4.6 40 mm diameter pipe 0.00 Metre 10.00 0.00

4.7 50 mm diameter pipe 30.00 Metre 12.00 360.00

Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of

approved quality :

8.1 15 mm diameter pipe 41.50 Metre 2.00 83.00

8.2 20 mm diameter pipe 0.00 Metre 3.00 0.00

8.3 25 mm diameter pipe 0.00 Metre 4.00 0.00

8.4 32 mm diameter pipe 0.00 Metre 5.00 0.00

9 Providing and fixing in position vitreous chinaware white lavatory suites of approved

make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair

115mm long without CP fittings complete in all respect.

9.1 Size 560mm x 450mm (Under counter oval) 4 No 2642 10568

Digitally signed by AKSHIT

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make

and as per the direction of Engineer-in-charge.

Providing and fixing wash basin 32 mm dia SS waste coupling complte in all

12 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

13.1 15 mm nominal bore 4 No 387 1548

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long

14 with S.S. triangular plate to European type W.C. of quality and make as approved by 4 No 270 1080

Engineer - in - charge.

15 Providing and fixing Unplasticised PVC connection pipe with brass unions :

15.1 45 cm length

15.1.1 15 mm nominal bore 14 No 57 798

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of

approved quality conforming to IS:8931

16.1 15mm nominal bore 14 No 497 6958

17 Providing and fixing toilet paper holder :

Providing and fixing white vitreous chinaware extended wall mounting water closet

of size 780x370x690 mm of approved shape including providing & fixing white

vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual

flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including

seat cover, and cistern fittings, nuts, bolts and gasket etc complete.

Providing and fixing white vitreous chinaware battery based infrared sensor

operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with

19 water (250 ml & 500 ml consumption), having water inlet from back side, including 1 No 6213 6213

fixing to wall with suitable brackets all as per manufacturers specification and

direction of Engineer-in-charge.

Digitally signed by AKSHIT

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983

with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and

brackets, cutting and making good the walls wherever required :

20.1 Kitchen sink with drain board

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make

as approved by Engineer in charge.

22.1 15 mm nominal dia 2 No 5872 11744

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste

fittings complete.

23.1 Semi rigid pipe

Providing and fixing 40mm i/d G.I. waste pipe embedded in walls up to floor level

including cost of union and plumber joint

25 Providing and fixing soil, waste and vent pipes :

25.1 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 263 Metre 1008 265104

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 (

1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast

iron/cast iron (spun) pipe embedded in and including cement concrete blocks

27 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size), including cost of cutting holes and making good the walls etc. :

27.1 For 100 mm dia pipe 40 No 162 6480

Digitally signed by AKSHIT

Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/

cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of

specified shape, projecting 75 mm outside the wall surface and fixed on wall with

4Nos., 6mm dia expansion hold fasteners, including drilling necessary holes in brick

28 wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the

already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of

specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts,

& washers of size 25x6 mm, one bolts on each side of the pipe.

Total bracket length 580 mm of approved shape and design (for single 100 mm dia

Providing and fixing bend of required degree with access door, insertion rubber

washer 3 mm thick, bolts and nuts complete.

29.1 100 mm dia

Sand cast iron S&S as per IS - 3989 10 No 425 4250

30 Providing and fixing plain bend of required degree.

30.1 100 mm dia

30.1.1 Sand cast iron S&S as per IS : 3989 30 No 356 10680

Providing and fixing single equal plain junction of required degree with access door,

insertion rubber washer 3 mm thick, bolts and nuts complete.

31.1.1 Sand cast iron S&S as per IS - 3989 15 No 678 10170

32 Providing and fixing single equal plain invert branch of required degree :

32.1.1 Sand cast iron S&S as per IS - 3989 35 No 564 19740

Providing and fixing trap of self cleansing design with screwed down or hinged

33 grating with or without vent arm complete, including cost of cutting and making good

the walls and floors :

33.1 100 mm inlet and 100 mm outlet

33.1.1 Sand cast iron S&S as per IS: 3989 10 No 1014 10140

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I.

grating brick masonry chamber with water tight C.I. cover with frame of 300 x300

mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not

less than 2.70 kg as per standard design:

34.1 With sewer bricks conforming to IS : 4885 4 No 1674 6696

Digitally signed by AKSHIT

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and

making good the walls etc.

Internal work - Exposed on wall

35.1 15 mm dia nominal bore 41.5 metre 191 7926.5

35.2 20 mm dia nominal bore 12 metre 239 2868

35.3 25 mm dia nominal bore 48 metre 318 15264

35.4 32 mm dia nominal bore 0 metre 393 0

35.5 40 mm dia nominal bore 0 metre 467 0

35.6 50 mm dia nominal bore 36 metre 575 20700

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making

36 good the walls etc. concealed pipe, including painting with anti corrosive bitumastic

paint, cutting chases and making good the wall :

36.1 15 mm dia nominal bore 50 metre 258 12900

36.2 20 mm dia nominal bore 12 metre 299 3588

Making chases up to 7.5x7.5 cm in walls including making good and finishing with

matching surface after housing G.I. pipe etc.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching up to

0.30m to 1.00m depth and refilling etc.

38.1 50 mm dia nominal bore 30 Metre 455 13650

38.2 65 mm dia nominal bore 0 Metre 564 0

Making connection of G.I. distribution branch with G.I. main of following sizes by

39 providing and fixing tee, including cutting and threading the pipe etc. complete :

39.1 50 to 80 mm nominal bore 1 No 950 950

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe

and making long screws etc. complete (New work) :

40.1 15 mm dia nominal bore 10 No 139 1390

40.2 20 mm dia nominal bore 10 No 174 1740

40.3 25 mm dia nominal bore 4 No 237 948

40.4 32 mm dia nominal bore 8 No 289 2312

40.5 40 mm dia nominal bore 0 No 360 0

40.6 50 mm dia nominal bore 2 No 448 896

41 Providing and fixing brass bib cock of approved quality :

Digitally signed by AKSHIT

41.1 15 mm nominal bore 4 No 280 1120

42 Providing and fixing brass stop cock of approved quality :

42.1 15 mm nominal bore 2 No 279 558

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

43.1 25 mm nominal bore 4 No 464 1856

43.2 20 mm nominal bore 8 No 430 3440

43.3 32 mm nominal bore 0 No 543 0

43.4 40 mm nominal bore 0 No 635 0

43.4 50 mm nominal bore 2 No 818 1636

Providing and fixing C.P. brass long body bib cock of approved quality conforming to

IS standards and weighing not less than 690 gms.

44.1 15 mm nominal bore 4 No 512 2048

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of

approved quality conforming to IS:8931

45.1 15mm nominal bore 14 No 497 6958

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved

make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved

quality and colour.

48 25mm nominal bore, weighing not less than 62 gms 4 No 105 420

Providing lead caulked joints to spun iron or C.I. pipes and specials, including

testing of joints but excluding the cost of pig lead :

49.1 100 mm diameter pipe 250 No 176 44000

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded

50 stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete

as per standard design :

50.2 150 mm diameter S.W. pipe 6 Metre 444 2664

50.3 200 mm diameter S.W. pipe 25 Metre 518 12950

Digitally signed by AKSHIT

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded

51 stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed

concrete as per standard design :

51.1 300 mm diameter S.W. pipe 31 Metre 442 13702

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars

52 jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine

sand) including testing of joints etc. complete :

52.1 250 mm dia. R.C.C. pipe 40.00 Metre 518 20720

52.2 300 mm dia. R.C.C. pipe 0.00 Metre 653 0

Providing and fixing rectangular high density polyethylene water storage loft tank

with cover, conforming to ISI : 12701, colour of opaque white or as approved by

53 Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & 5000 Litre 8 40000

over flow pipes. The base support i/c fittings & fixtures for tank shall be paid

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts,

54 rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid

Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373

55 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The

tail pieces if required will be paid separately) :

55.1 80 mm dia nominal bore 1 No 3033 3033

Disinfecting C.I. water mains by flushing with water containing bleaching powder @

0.5 gms per litre of water and cleaning the same with fresh water, operation to be

repeated three times including getting the sample of water from the disinfected main

tested in the municipal laboratory.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse

sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) :

3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1

cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size),

57 inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)

finished with floating coat of neat cement and making channels in cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

finished with a floating coat of neat cement complete as per standard design :

Digitally signed by AKSHIT

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)

57.1 455x610 mm internal dimensions, total weight of cover and frame to be not less

than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

57.1.1 With common burnt clay non-modular bricks of class designation 7.5 2 No 7368 14736

Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium

58 duty) 500 mm internal diameter, total weight of cover and frame to be not less than

116 kg (weight of cover 58 kg and weight of frame 58 kg) :

58.1 With common burnt clay non-modular bricks of class designation 7.5 0 No 16308 0

59 Extra for depth for manholes :

59.1 Size 90x80 cm

59.1.1 With common burnt clay non-modular bricks of class designation 7.5 1.5 Metre 4561 6841.5

60 Size 120x90 cm

60.1 With common burnt clay non-modular bricks of class designation 7.5 0 Metre 5446 0

Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and

0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement

plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with

a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse

61 sand : 6 graded stone aggregate 40 mm nominal size), and making necessary

channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) finished with a floating coat of neat cement, all

complete as per standard design :

0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation)

560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame

to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse

60.1 sand : 4 graded stone aggregate 20 mm nominal size) including centering,

shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at

the external surface shall be paid for separately) :

60.1.1 With common burnt clay non-modular bricks of class designation 7.5 3 No 6567 19701

Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m

61.1 With common burnt clay non-modular bricks of class designation 7.5 1 Metre 3900 3900

Digitally signed by AKSHIT

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement

62 concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm

nominal size) as per standard design :

62.1 With 20x20 mm square bar 15 No 272 4080

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of

required shape and approved quality

63.1 560 mm dia

63.1.1 Circular shape 500 mm internal diameter 6 No 832 4992

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement

64 mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C.

horizontal grating with frame complete as per standard design :

64.1 With common burnt clay non-modular bricks of class designation 7.5 6 No 3158 18948

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of

65 approved quality) complete with 6 mm thick hard board ground fixed to wooden 8 No 910 7280

cleats with C.P. brass screws and washers complete.

Providing and fixing in position best Indian make coat and hat hooks fixed into wall

66 with C.P. brass screws and rawl plugs etc. complete including cutting and making

good the walls etc.

Providing and fixing of SS grating with frame of 150 mm dia or rectangular soze 2-3

mm thick as per approved shape and size complete in all respects.

Cutting holes of required size in brick masonry wall for fixing of exhaust fan

including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and

making good the same etc. complete as per direction of Engineer-in-charge.

Making holes by cutting cores of appropriate dia in RCC floors and roofs of

thickness up to 6" (six inches) for passing drain pipe and repairing the hole after

insertion of drain pipe etc. including finishing-complete so as to make it leak proof.

69.1 Drain pipe of 150mm internal dia 32 No 1117 35744

Boring Works for recharge pit

Digitally signed by AKSHIT

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method

prescribed in IS: 2800 (part I), including collecting samples from different strata,

preparing and submitting strata chart/ bore log, including hire & running charges of

all equipments, tools, plants & machineries required for the job, all complete as per

direction of Engineer-in-charge, up to 90 metre depth below ground level.

70.1 All types of soil

Supplying, assembling, lowering and fixing in vertical position in bore well,

Unplasticised PVC medium well casing (CM) pipe of required dia, conforming to IS:

71 12818, including required hire and labour charges, fittings & accessories etc. all

complete, for all depths, as per direction of Engineer -in-charge.

71.1 150 mm nominal size dia 45 Metre 665 29925

Supplying, assembling, lowering and fixing in vertical position in bore well

Unplasticised PVC medium well screen (RMS) pipes with ribs, conforming to IS:

12818, including hire & labour charges, fittings & accessories etc. all complete, for

all depths, as per direction of Engineer-in-charge.

72.1 150 mm nominal size dia 15 Metre 719 10785

Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20 cm,

73 in recharge pit, in the required thickness, for all leads & lifts, all complete as per 8 cum 1164 9312

direction of Engineer-in-charge.

Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm, in the

74 recharge pit, over the existing layer of boulders, in required thickness, for all leads & 8 cum 1164 9312

lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & levelling coarse sand of size range 1.5 mm to 2 mm in

75 recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete 8 cum 1164 9312

as per direction of Engineer -in-charge.

Gravel packing in tube well construction in accordance with IS: 4097, including

providing gravel fine/ medium/ coarse, in required grading & sizes as per actual

requirement, all complete as per direction of Engineer-in-charge.

Digitally signed by AKSHIT

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of

77 tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe

assembly of tube well as per IS:2800 (part I).

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to

establish maximum rate of usable water yield without sand content (beyond

permissible limit), with required capacity air compressor, running the compressor for

required time till well is fully developed, measuring yield of well by "V" notch method

79 or any other approved method, measuring static level & draw down etc. by step 8 1153 9224

draw down method, collecting water samples & getting tested in approved

laboratory, i/c disinfection of tube well, all complete, including hire & labour charges

of air compressor, tools & accessories etc., all as per requirement and direction of

Engineer-in-charge.

Providing , installation , testing and commissioing of surface maunted , horzontal

type , water transfer pumping set including the following:

80.1 Pumps discharge 4 lps & head 45 metre

80.2 pump status 2 Nos ( 1 working + I stand by)

80.3 Pump foundations of required size

80.4 required valve , fittings, and starter , dry run preventor etc.

80.5 Any other fittings or accessories required to make system operational.

Providing , installation , testing and commissioing of submersible type , horzontal /

horizontal , water transfer pumping set including the following:

Pumps discharge 4 lps & head 10 metre

pump status 2 Nos ( 1 working + I stand by)

Required pipe up to 10 m of 65 mm dia , complete in all respects. 1 Set 85000 85000

Digitally signed by AKSHIT

Qty Unit Basic Rate TOTAL AMOUNT

Qty Unit Basic Rate TOTAL AMOUNT

Description of Item

Item No. ELECTRICAL WORKS

POINT & CONTROL WIRING IN PVC CONDUIT, ETC.

Required clearances from the concerned statutory authorities are in the scope of this

work.Statutory fees paid will be reimbursed on production of original receipts in the name of Client

Please follow the GRIHA / Indian Green Building Council Norms for luminosus efficacy, lighting

levels, illumination level etc.without extra cost.

34.02 RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm,

1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in

wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs)

required for suitable number of modules (Modular accessories) for having Step type electronic fan

regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp.

34.02 combined/ universal Socket (shuttered), 6/10Amp. Switches and 16/20Amp. switches with indicator etc.

and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet

metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for

walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR

cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other

petty material etc. including the cost of above material, cutting and filling up of chases (With finishing

(i) a Wiring fan point (Without fan box) 4 Each 1680.00 6720.00

(i) b Wiring fan point (With fan box) 10 Each 1680.00 16800.00

(ii) Wiring light point 42 Each 1680.00 70560.00

(iii) Wiring call-bell point 1 Each 1680.00 1680.00

(v) Wiring 6Amp. Plug control comprising wall socket point 13 Each 373.00 4849.00

(vi) Wiring 16/20Amp. power plug control point 2 Each 480.00 960.00

(vii) Wiring light point without control switch. 13 Each 1680.00 21840.00

(viii) Wiring light point with double control switches. 1 Each 2242.00 2242.00

RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE

PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):

Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized

concealed metal boxes required for suitable number of modules (Modular accessories) for having

(x) 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered),

6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty

material etc. including the cost of above material, cutting and filling up of chases (with finishing the

Wiring Computer terminal point having 2 Nos. 6Amp. 2/3 universal socket

(x) b (shuttered), 1No. 16/20Amp. universal Socket (shuttered) and 2Nos. 16/20Amp. switch with

indicator (Modular accessories). 7 Each 659.00 4613.00

PVC, HDPE PIPES & PVC FLEXIBLE PIPES:

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI

marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, MS

saddle clamps and other petty materials etc., as per PWD General Specifications:- (For ckt wiring)

Digitally signed by AKSHIT

(i) Heavy Gauge PVC Conduit Pipe 20mm dia. (On Surface) 450 Metre 151.00 67950.00

(ii) Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface) 150 Metre 168.00 25200.00

(ii) Heavy Gauge PVC Conduit Pipe 32mm dia. (On Surface) 150 Metre 209.00 31350.00

(iv) Heavy Gauge PVC Conduit Pipe 40mm dia. (On Surface) 10 Metre 257.00 2570.00

(v) Heavy Gauge PVC Conduit Pipe 50mm dia. (On Surface) 10 Metre 316.00 3160.00

Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement,

check-nuts as required:-

(a) PVC Flexible Pipe 20mm dia. 250 Metre 47.00 11750.00

Supply and erection of Compression glands, Locking arrangement, Checknuts for PVC flexible pipe

complete with as required:-

(a) PVC compression Socket gland 20mm dia. 16 Each 17.00 272.00

34.11 HEAVY GAUGE WELDED CONDUIT PIPES:

Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-

II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and

other petty materials etc., where necessary including painting as per PWD General

Specifications:- (For Sub Main wiring)

(ii) HGW Conduit Pipe 25mm dia. (1.6mm thick) On Surface 10 Metre 289.00 2890.00

(iii) HGW Conduit Pipe 32mm dia. (1.6mm thick) On Surface 10 Metre 360.00 3600.00

(iv) HGW Conduit Pipe 40mm dia. (2mm thick) On Surface 75 Metre 515.00 38625.00

(v) HGW Conduit Pipe 50mm dia. (2mm thick) On Surface 45 Metre 634.00 28530.00

(xi) Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), White painted suspension rod

for ceiling fan 10 Metre 254.00 2540.00

RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW,

PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):

Supply and erection of TV socket, Telephone socket and Networking socket points in powder

coated/anodized concealed metal boxes recessed in wall required for suitable number of modules

(xi) (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one

module), covered with Frame Plate and other petty material etc., including the cost of above material,

cutting and filling up of chases (with finishing the surface):-

(a) Wiring TV socket point (one module) 1 Each 1680.00 1680.00

(b) Wiring Telephone socket point RJ11 (one module) 2 Each 1680.00 3360.00

RECESS AIR CONDITIONER SUPPLY SURFACE AIR CONDITIONER SUPPLY TERMINAL POINTS

34.07 (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR

Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized

concealed metal boxes required for suitable number of modules (Modular

accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter

25Amp. (2Module), covered with Frame Plate and other petty material etc. including the

cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height

and 1No. Motor starter 25Amp. erected at switchboard height. 6 Each 807.00 4842.00

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI

CSR 34.09 marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size

complete in all respect as desired by the Engineer-in-charge:-

(ii) Overall size 1.5sq.mm (Un-sheathed) (For circuit wiring) 1350 Metre 51.00 68850.00

(iii) Overall size 2.5sq.mm (Un-sheathed) ( For Comuter /TV wiring) 480 Metre 107.00 51360.00

(iv) Overall size 4sq.mm (Un-sheathed) (For Power & AC points) 600 Metre 222.00 133200.00

Digitally signed by AKSHIT

(v) Overall size 6sq.mm (Un-sheathed) (For Light & UPS DB) 630 Metre 326.00 205380.00

(vii) Overall size 16sq.mm (Un-sheathed) ( For AC & Power DB) 180 Metre 326.00 58680.00

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated,

DSR 1.19 shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed

steel/ PVC conduit as required. 25 Metre 54.00 1350.00

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,

1.18 unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

34.15 SUPPLY AND ERECTION OF WIRING ACCESSORIES:

Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories)

in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:-

(xxxii) Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including

fixing and connection of existing switches and sockets and other petty material etc:-

(a)Modular Cover Frame One or Two Module 3 Each 34.00 102.00

34.15 (xxxiv) Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M,

16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other

petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):-

(a) Powder Coated Concealed Metal Box with Brass Lugs One/Two Module 3 Each 53.00 159.00

(b) Powder Coated Concealed Metal Box with Brass Lugs Three Module 5 Each 59.00 295.00

(c) Powder Coated Concealed Metal Box with Brass Lugs four Module 2 Each 67.00 134.00

TOTAL OF POINT WIRING IN PVC CONDUIT, ETC. ₹ 879,743.00 ₹ 0.00

LIGHT FIXTURES AND FITTINGS, CEILING FANS, SENSORS ETC.

Supply, Installation, Testing and Commisioning of LED in 12 W +/- 1 W Surface / Recess Mounted

Downlighter Round Shape with minimum system lumen efficacy of 100 lm/W and system lumen 1200 lm

with Pressure Die cast Aluminium Housing and HET diffuser and P.F.>0.95 ,THD, including making

suitable arrangement for fixing , connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed

copper conductor complete as reqd. 48 Each 750.00 36000.00

Supply, Installation, Testing and Commisioning of IP20 Led fixture 2FT 10 W+/- 1W with Surface

Mounted 4 Feet with aluminium housing and Polycarbonate diffuser,minimum system efficacy of

100lm/W with P.F.>0.90 with THD,including making suitable arrangement for fixing , connection with 3

x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor complete as reqd.

Supply, Installation, Testing and Commisioning of Wall Bracket led fixture 10 W +/- 1 W Wall Mounted

with minimum system lumen efficacy of 100 lm/W and P.F.>0.95 with THD,including making suitable

arrangement for fixing , connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper

conductor complete as reqd.C 6 Each 600.00 3600.00

Digitally signed by AKSHIT

Supply, Installation, Testing and Commisioning of IP65 Bulkhead led fixture 10 W +/- 1 W Wall

Mounted with minimum system lumen efficacy of 100 lm/W with Pressure Die Cast Aluminum housing,

Polycarbonate Opal Diffuser and P.F.>0.95 with THD,including making suitable arrangement for fixing ,

connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor complete as

OCCUPANCY SENSORS

Supplying, installation, testing and commissioning of Microwave techNoslogy based occupancy sensor

having high performance, Nosn regulating programmable type, suitable for connected load upto 10Amp,

for mounting height up to 2.6 Meter and for 5m X 20m coverage area along with necessary fixing

arrangements i/c programming at site etc. complete as required. 4 Each 11893.00 47572.00

Supplying, Installation, Testing & Commissioning of 250 mm sweep fresh air ventilating fan with

aerodynamically designed & balanced blades suitable for operation on 230 v single phase AC supply

complete connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor etc as

required as reqd.with all accessories as required 4 Each 2500.00 10000.00

Supply, Installation, Testing and Commissioning of following sweep, BEE 5 star rated, ceiling fan with

Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 Nos blades, 30 cm long down rod, 2

Nos caNospies, shackle kit, safety rope, copper winding, Power Factor Nost less than 0.9, Service

DSR 19.1 Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-

2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining

accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation

resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc.

complete as required.

TOTAL OF LIGHT FIXTURES AND FITTINGS, CEILING FANS, EXHAUST FANS, SENSORS ETC.

MEDIUM VOLTAGE PANELS

Fabricating, Installing, Testing & Commissioning of Main cum automatic mains failure control

including auto by-pass panel, suitable for 100 KVA Main Supply and 75 KVA silent type DG set

complete with relays, timers, set of CTs for metering & protection and energy analyser to indicate

currents, phase and line voltages, frequency, power factor, KWH, KVARH & provision for overload,

short circuit, restricted earth fault, under frequency, control cabling from AMF panel to diesel engine and

elsewhere if required, all complete and inter locking including the following:sheet steel cubicle type

panels fabricated from 14 guage thick CRCA sheet, dust and vermin proof, indoor type MV Panels with

hinged lockable doors fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz

AC supply with rear / bottom access for cable alley and with segregated bus-bar chamber and including

supplying and fixing following switchgears, meters and accessories, inter-connections, bonding to earth,

bottom base channel of MS section not less than 100mmx50mmx5mm (thick). Fabrication shall be done

in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud

cable alleys, cable gland plates powder coated painting of approved shade after antirust treatment (with

min seven tanks ) and marking as specified. Switch boards complete as per schematic diagram:

Colour: Gray Powder Coated, as per approved sample.

Note: All MCCBs of 250 amps and below rating shall be provided with thermal magnetic

release & MCCBs above 250 amps rating shall be provided with Microprocessor based release.

(All MCCBs shall be fitted with extended type rotary handles and spreader links)

Digitally signed by AKSHIT

1nos, 160 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 36 KA (ICS=100%

ICU up to 433 V) complete with extended Rotary Mechanism and Spreader Link Set with

microprocessor release for O/L, S/C & E/F protection.- Mains Supply

1nos, 125 Amps. Four pole Moulded Case Circuit Breaker of fault breaking capacity 36 KA (ICS=100%

ICU up to 433 V) complete with extended Rotary Mechanism and Spreader Link Set with

microprocessor release for O/L, S/C & E/F protection.- DG Supply

1 Nos. 200 Amp. 415 volt AC 3 duty 4 pole contactor - 2nos

1 No. 200 Amp 415V, AC , 4P Manual Changeover with Operating Handle

Auto/Manual/Test/Off selector switch

2 Nos. over voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage relay.

3 Sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for metering

Energy analyser unit to indicate current voltage frequency power factor and KWH

Indicating lamps for load on mains and load on set

Fuse for instruments

Battery charger, complete with transformer/rectifier, D.C. voltmeter and ammeter, selector switch for

trickle, off and boost and current adjustment.

Main supply failure monitor

Supply Failure Timer

Restoration Timer

Control unit with three impulse automatic engine start/stop and failure to start lockout

Impulse counter with locking and reset facility.

ON/OFF/Control circuit switch with indicator

Audio/Video annunciation for.

(i) High water temperature

(ii) Low lubricating oil pressure

(iii) Engine over speed

(iv) Engine fails to start

(v) Full load/maximum load warning

TPN aluminum bus bars of minimum of 500 Amps capacity with heat shrinkable colored sleeves and I/C

DMC/SMC bus bars supports at required intervals complete for cross section, size supports & their

OUTGOING BREAKERS

01 Nos 63 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity with Thermal

Magnetic release for O/L & S/C protection and neutral link . For Lift

01 Nos 63 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity with Thermal

Magnetic release for O/L & S/C protection and neutral link For External Lighting

01 Nos. 63 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity . For

05 Nos. 40 Amp Four Pole Miniature Case Circuit Breaker of 10 KA breaking Capacity . For Light &

03 Nos. 63 Amp Four Pole MCBreaker of 10 KA breaking Capacity . For Power & AC DB

01 Nos.100/63 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity with

Thermal Magnetic release for O/L & S/C protection and neutral link. For EV Charging

02 Nos.100/63 Amp Four Pole Moulded Case Circuit Breaker of 10 KA breaking Capacity with

Thermal Magnetic release for O/L & S/C protection and neutral link. For spare 1 Each 400000.00 400000.00

Panel described as above

1 Nos. 100 Amp 16 KA FP Moulded Case Circuit Breaker.

Digitally signed by AKSHIT

1 Set of phase indicating lamps with MCB.

1 Set of ON/OFF/TRIP indicating lamps with MCB.

1 Nos. Digital MFM with CT's.

150 Amp FP busbar with coloured heat shrinkable sleeve.

(Busbar density considered shall Nost be more than : 1A/Sqmm for Copper & 0.7A/Sqmm for

2 Nos 20 Amp TP Miniature Circuit Breaker.

3 Nos 16 Amp TP Miniature Circuit Breaker.

Fully automatic DOL starter suitable with MCB for operating upto 7.5 kw motors/fan capacity,

complete with contactors, overload protection relay, current sensing type single phase preventer, ON

indications, push buttons, auto / manual / off selector switch,timer, other accessories. complete as

required-7 Nos 1 Each 45000.00 45000.00

TOTAL OF MEDIUM VOLTAGE PANELS ₹ 0.00 ₹ 445,000.00

DISTRIBUTION BOARDS & MINIATURE CIRCUIT BREAKERS

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short

circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-

CSR 34.16 A C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label

holder facility in the existing MCB distribution board as per PWD General Specifications including

connections with suitable size of thimbles/lugs:-

(ii) MCB Single Pole 6-32amp. (10kA, Curve-C) 114 Each 285.00 32490.00

(vi) MCB Double Pole 6-32amp. (10kA, CurveC) 1 Each 696.00 696.00

(x) MCB Triple Pole 6-32amp. (10kA, Curve-C) 1 Each 1070.00 1070.00

(xvi) MCB Four Pole , 63amp. (10kA, Curve-C) 8 Each 1115.00 8920.00

34.17 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:

Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust

protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper

busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire

set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting

miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with

provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal

distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as

outgoings) as per PWD General specifications including connections with suitable size of thimbles and

bonding to existing earth etc:-

(v) TP&N Horizontal Double Door Distribution Board 4 way each 5 Each 2390.00 11950.00

(vi) TP&N Horizontal Double Door Distribution Board 6 way each 3 Each 2390.00 7170.00

(xvi) Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal

door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated

copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector,

34.17 color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of

required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers

in the distribution board as per PWD General specifications including connections with suitable size of

thimbles and bonding to existing earth etc.:

(a) TP&N Double Door Vertical DB's 4 way each (With provision of FP MCCB upto 125amp) 1 Each 7951.00 7951.00

34.23 B MCCB'S (FOR PANELS & SHEET ENCLOSURE):

Digitally signed by AKSHIT

Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubicle type) in the existing

Cubical Panel (Conforms to IEC:60947-2) having Ics=100%, Icu, 100% neutral with spreader terminal

links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts &

Connection on both sides of MCCB with sutiable size of thimbles etc:-

(ii) MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting

(iii) MCCB Four Pole 125amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting 1 Each 5103.00 5103.00

TOTAL OF DISTRIBUTION BOARDS ₹ 79,353.00 ₹ 0.00

LT CABLES, TERMINATIONS, & CABLE TRAYS ETC.

34.10 A XLPE INSULATED ARMOURED CABLES (UNDERGROUND):

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and

served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid 1metre below ground level

including excavation, sand cushioning, covering with sand & First Class bricks and back filling the

trench etc., of the required size as per PWD General Specifications:-

(xxv) Overall size 70sq.mm (3½ Core) Armoured (Underground) For 75 KVA Dg Set 20 Meter 475.00 9500.00

(xxvii) Overall size 120sq.mm (3½ Core) Armoured (Underground) For Main Supply 20 Meter 497.00 9940.00

(xxxv) Overall size 6sq.mm (4Core) Armoured (Underground) For External Lighting & EV Charging

outgoings 25 Meter 431.00 10775.00

(xxxvi) Overall size 10sq.mm (4Core) Armoured (Underground) For EV Charging outgoings 50 Meter 431.00 21550.00

34.10 B XLPE INSULATED ARMOURED CABLES (LOOSE):

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and

served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe

as per PWD General Specifications:-

(xxv) Overall size 70sq.mm (3½ Core) Armoured (Underground) 10 Meter 310.00 3100.00

(xxvii) Overall size 240sq.mm (3½ Core) Armoured (Underground) 10 Meter 473.00 4730.00

(xxxv) Overall size 6sq.mm (4Core) Armoured (Underground) outgoings 25 Meter 91.00 2275.00

(xxxvi) Overall size 6sq.mm (4Core) Armoured (Underground) 50 Meter 111.00 5550.00

34.10 E XLPE INSULATED ARMOURED CABLES (ON SURFACE):

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and

served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid (On Surface) as per PWD General

Specifications:-

(xxv) Overall size 70sq.mm (3½ Core) Armoured (Underground) 20 Meter 475.00 9500.00

(xxvii) Overall size 240sq.mm (3½ Core) Armoured (Underground) 20 Meter 564.00 11280.00

(xxxv) Overall size 6sq.mm (4Core) Armoured (Underground) outgoings 25 Meter 431.00 10775.00

(xxxvi) Overall size 6sq.mm (4Core) Armoured (Underground) 20 Meter 431.00 8620.00

CABLE TERMINATIONS

Supply and erection of heavy duty brass single compression gland for cable end termination duly

complete with checknuts etc. including making necessary connections:-

(iii) Brass Gland for Aluminium cable 2/3/4 Core size 6sq.mm 10 Nos 294.00 2940.00

(iv) Brass Gland for Aluminium cable 2/3/4 Core size 10sq.mm 8 Nos 295.00 2360.00

(v) Brass Gland for Aluminium cable 2/3/4 Core size 16sq.mm 6 Nos 311.00 1866.00

(viii) Brass Gland for Aluminium cable 2/3/3½/4 Core size 70sq.mm 2 Nos 495.00 990.00

(x) Brass Gland for Aluminium cable 3/3½/4 Core size 1120sq.mm 2 Nos 710.00 1420.00

34.25 CABLE TRAYS

Digitally signed by AKSHIT

Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the

existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm

x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the

Engineer-in-charge and as per PWD General Specifications:-

(i) Cable Tray Size 150mm x 50mm x 50mm (2mm thick) 20 Meter 686.00 13720.00

(ii) Cable Tray Size 300mm x 50mm x 50mm (2mm thick) 10 Meter 1025.00 10250.00

(iii) Cable Tray Size 450mm x 50mm x 50mm (2mm thick) 10 Meter 1348.00 13480.00

34.37 DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:

Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground

34.37 A level including excavation placing the pipe in position and back filling with excavated soil etc. of the

required size:-

(i) Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.) 10 Meter 136.00 1360.00

(ii) Double Walled Corrugated HDPE Pipe 63/ 51mm (Outer/ Inner dia.) 10 Meter 136.00 1360.00

(v) Double Walled Corrugated HDPE Pipe 160/ 136mm (Outer/ Inner dia.) 10 Meter 385.00 3850.00

(vi) Double Walled Corrugated HDPE Pipe 180/ 152mm (Outer/ Inner dia.) 10 Meter 580.00 5800.00

TOTAL OF LT CABLES, TERMINATIONS, CABLE TRAYS AND RACEWAYS, ETC. ₹ 166,991.00 ₹ 0.00

Providing, Installing, Testing and Commissioning of ‘Silent Type’ Diesel Generating set with AMF

Panel alongwith having Prime Power Rating of 75 KVA, 415 volts at 1500 RPM, 0.8 lagging power

factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor and consisting of the

followings etc. as required.:

Diesel engine 4 stroke liquid cooled, electric start, of suitable BHP at 1500 RPM suitable for above

output of alternator at 40 Degree C, 50% RH & at 1000 Meter MSL and conforming to BS 5514,

BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous

operation. The engine will be fitted complete with all the required accessories.

Engine mounted Instrument Panel fitted with and having digital display for following:

(i)Start-stop switch with finger touch

(ii)Water temperature indication

(iii)Lubrication oil pressure indication

(iv)Lubrication oil temperature indication

(v)Battery charging indication

(vi) RPM indication

(vii)Over speed indication

(viii)Low lub. Oil trip indication

(ix)Engine Hours indication

Synchronous alternator rated at 75KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with

0.8 lagging power factor at 40 Degree C, 50% RH & a 1000 Meter MSL. The alternator shall be

having SPDP enclosure, brushless, continuous duty, self- excited and self-regulated through AVR

conforming to IS: 4722/BS 2613 suitable for tropical conditions and with class-F/H insulation.

Base Frame & Foundation

Both the engine and alternator shall be mounted on suitable base frame made of MS channel

with necessary reinforcement which shall be installed on suitable cement concrete foundation and

vibration isolation arrangement as per recommendations o manufacturer.

Digitally signed by AKSHIT

Daily service fuel tank of capacity 480 liters/manufacturer standard fabricated with suitable

gauge of M.S. sheet complete with all standard accessories and fuel piping between fuel tank

and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level

indications & accessories as required as per specifications.

Exhaust System :

Starting System :

12V/24V DC starting system comprising of starter motors : voltage regulator and arrangement for

initial excitation complete with suitable nos. of batteries (suitable capacity) as required as per

specifications.

Accoustic and weather proof enclosure with arrangement for fresh air intake for cooling of

the engine & alternator, extraction, discharging hot air in to the atmosphere as per specifications.

TOTAL OF DG SET ₹ 0.00 ₹ 0.00

EARTHING SYSTEM

Supply, installation, testing & commissioning of earthing system & associated accessories, etc.

complete all as per the instructions of E.I.C.

1) Measurements of resistance of each earth station & resistance of complete scheme of

earthing layout must be measured recorded & got approved by E.I.C.

2) Jointing of the earth strip shall be with brass nuts bolts and also with solder joints.

3) Jointing of the earth wire shall be with solder joints with tinned cable sockets

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing

5.3 masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long

etc. with charcoal/ coke and salt as required. 6 Set 8351.00 50,106.00

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including

connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. 60 Meter 755.00 45,300.00

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing

surface/ recessed conduit/ submain wiring/ cable as required. 700 Meter 50.00 35,000.00

Providing and fixing earth bus of 1metre long 50 mm X 6 mm GI strip with 8 Nos tapping holes mounted

NS/MR on insulators & enclosed in IP 42 metal enclosurewith all accessories etc. as required.

TOTAL OF EARTHING SYSTEM ₹ 164,846.00 ₹ 5,106.00

LIGHTNING PROTECTION SYSTEM

6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having

single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as

6.3 Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as

6.4 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object)

by riveting / nut bolting/ sweating and soldering etc as required. 50 No 139.00 6,950.00

Digitally signed by AKSHIT

5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing

masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long

etc. with charcoal/ coke and salt as required. 2 Set 8351.00 16,702.00

5.11 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including

connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. 20 Meter 755.00 15,100.00

5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

6.9 Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor

complete as required.(For horizontal run) 75 Meter 201.00 15,075.00

6.10 Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor

complete as required.(For vertical run) 35 Meter 201.00 7,035.00

6.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of

G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. 2 No 140.00 280.00

TOTAL OF LIGHTNING PROTECTION SYSTEM ₹ 68,136.00 ₹ 0.00

SAFETY EQUIPMENTS FOR ELECTRICAL INSTALLATION

Providing and fixing MV danger Nostice plate of 200mm x 150mm made of mild steel, atleast 2 mm

DSR 2.21 thick, and vitreos enamelled white on both sides and with iscription in single red colour on front side as

required 6 Nos 315.00 1,890.00

Supplying and installing at approved location approved make pair of 4 Nosfire buckets of 24 gauge

galvanized steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside and

red outside and black on the bottom, inscribed with letters “FIRE” in black and gold. Cost shall be

inclusive of supporting stand, hanging bars & hooks etc comply and painting providing MS stand duly

painted over a coat of primer. (Distinctly identified as "WATER & SAND")

Providing and fixing of Insulating Elastomeric (a genric term that includes rubbers, latex and elastomeric

compounds that may be natural or synthetic or a mixture or a combination of both) mat with ISI mark of

1 Meter wide and 2mm thick to withstand 1.1 KV dielectric strength as per IS 15652-2006

Supply and fixing in position approved shock treatment chart written in English, Hindi nd local language.

These charts shall be framed in wooden frame and covered with clear glass of thickness Nost less than

Supply and fixing of First Aid box as approved by St. John Ambulance Brigade / Indian red Cross

conforming to IS 2217 - 1963 1 Each 1500.00 1500.00

Providing pair of duly tested rubber hand gloves as per IS :340715 suitable for working on 15 kV 1 Each 2500.00 2500.00

TOTAL OF SAFETY EQUIPMENTS FOR ELECTRICAL INSTALLATION ₹ 1,890.00 ₹ 7,700.00

EXTERNAL LIGHTING

LED FITTINGS FOR EXTERNAL LIGHTING

Digitally signed by AKSHIT

Supply, Installation, Testing and Commissioning of 800 mm long 11 W LED IP 65 Bollard , Housing

made of extruded aluminium for excellent heat dissipation ,Weather-proof and rust-free luminaire with

pure polyester powder coating,Symmetric glare-free light distribution with a polycarbonate diffuser,High-

efficacy LEDs for optimum energy consumption,Potted driver and accessories pre-wired up to terminal

block, having base plate with holes for direct mounting complete with all accessories including

preparation of foundation, fixing, connection etc.complete as per requirement at site. Lumen Efficacy

of LED>110Lm/W @ 4000 K color temperature ,PF ≥0.95, THD ≤10%,Input Voltage Range 140-280

V, 3 KV Inbuilt Surge Protection,50,000 Hrs LED life with L70 criteria.

Supply, Installation, Testing and Commissioning of 45 W LED Postop Dust and waterproof with IP66

made up of Aluminium diecast housing duly powder coated with pure grey polyester

powder,Polycarbonate fresnel/street optic lens that reduces glare,Uniform and wide light distribution

with lens/diffuser,Metal clad PCBs,High performing integral driver.luminare should be dry sky

certified.Efficacy of LED>100Lm/W @ 5700 K color temperature ,PF ≥0.95, THD ≤10%,Input

Voltage Range 140-280 V, 3 KV Inbuilt Surge Protection complete as per requirement at site.

Supply, Installation, Testing and Commisioning of 40 W LED street Light luminaire, cradle mounted, Al

Pressure Die cast Housing having minimum system lumen efficacy of 110 lm/W with minimum system

lumen output of 4400 lumens. The luminaire shall have IP66 protection with Beam angle of 60 degree,

CCT of 5700K and CRI 80. The LED shall be compliant with Useful L70 life of >50000 Hrs.Driver

efficiency should be 85%, THD0.95 in input voltage range of 140V to 300V (nominal rated voltage –

240V) with 5 KV internal surge protection and 10KV External protection

34.30 GALVANIZED STEEL OCTAGONAL POLES FOR WIND VELOCITY OF 169 Km/ HOUR:

Supply and erection of Galvanized Steel Octagonal Pole (Sheet thickness 3mm) designed to withstand

wind speed 169km/ hour of suitable length (Raw material confiming to IS-5986 (FE-510), BSEN-

10025S355J or ASTM-572A (GR-50)) and thickness of galvanization (70mm thick) conforming to

IS:2629/ IS:2633/ IS:4759, BSEN-ISO-1461- 1991 OR ASTM-A123/A123M-02. The pole shall be in

single piece hot dip galvanized and shall be tapered towards the top. The bottom section shall have

openable slot with exterior surface door & shall have suitable locking arrangement for housing three

phase 4wire cable connection, bakelite sheet, MCB, loop in and out arrangement for incoming/ outgoing

cables. There shall be suitable arrangement for earthing. Rigid Base plate of suitable size and thickness

shall be welded inside and outside at the bottom of pole with provision for fixing 4 foundation bolts. The

octagonal pole shall be bolted on a pre- cast foundation with a set of four foundation bolts for greater

rigidity. The foundation shall be erected over cement concrete M20 with steel of given size as per

design of original pole manufacturer to fixed up to a required planting depth below ground level as

(iii) Galvanized Octagonal Pole Overall Length 6 metre (Sheet thickness 3mm), Top dia.(A/F) 70mm

and bottom dia. (A/F) 130mm, Foundation size below G/L 550mm x 550mm x 1200mm, 4Nos.

Foundation Bolts size 20mm dia., Length≥600mm with Base Plate Dimensions 220mm x 220mm x

34.30 GALVANIZED OCTAGONAL POLE BRACKETS:

SINGLE/ DOUBLE ARM BRACKETS

(x) Supply and erection of bracket for galvanized octagonal pole, the bracket should be fixed on the top

of the pole having top outer dia. 70mm to 90mm (A/F) complete in all respect as approved by the

Engineer-in-charge at site:-

(b) Single arm bracket 1 metre long for galvanized octagonal pole 6 Each 1490.00 8940.00

Digitally signed by AKSHIT

CABLES, OUTDOOR PANEL ,EARTHING ETC.

34.09 (xiii) Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper

conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size

complete in all respect as desired by the Engineer-in-charge:-

(b) Overall size 1.5sq.mm (48/0.20mm), 3Core 60 Meter 76.00 4560.00

34.10 B XLPE INSULATED ARMOURED CABLES (LOOSE):

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and

served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe

as per PWD General Specifications:-

(xxxv) Overall size 6sq.mm (4Core) Armoured (Loose) 75 Meter 91.00 6825.00

Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound)

confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper

34.33 (vii) proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with

locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of

required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as

approved and desired by the Engineer In-Charge at site:-

(b) SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to

IS:14772, inner dimensions 200mm x 140mm x 95mm with hinged water tight cover with locking

arrangement 4 Each 804.00 3216.00

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing

surface/ recessed conduit/ submain wiring/ cable as required. 150 Meter 62.00 9300.00

Supply and erection of heavy duty brass single compression gland for cable end termination duly

complete with checknuts etc. including making necessary connections:-

(iii) Brass Gland for Aluminium cable 2/3/4 Core size 6sq.mm 48 Nos 294.00 14112.00

Supply, installation, testing & commissioning of stronomical time switch of following configuration to be

mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set &

sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour

display format with suitable battery and indication for relay status i/c programming at site complete as

reqd 3 output (1output per phase) and suitable for three phase supply.

TOTAL FOR EXTERNAL LIGHTING ₹ 97,953.00 ₹ 81,500.00

WATER SUPPLY PUMPS AND ACCESSORIES / EQUIPMENT'S

PUMPS & EQUIPMENTS

Providing, fixing, Testing, erecting & Commissioning of Monoblock pumps having CI casing, BRONZE

impellers, EN8 shaft and driven with 2900 RPM 415 Volts, 50 cycles, AC 3 phase TEFC motor. Vendor

need to consider all the required fittings and accessories like NRV, Isolation valve, Pressure gauge,

electrical cables till pump and panel etc all complete and as instructed by site incharge

(Vendor to submit performance curves and technical catalogue of the proposed model for review &

The pump shall be selected for performance at best efficiency point. However, the pump selection shall

be suitable for performance with set point @ + 20% of the rated head.

Nos. of Pumps : 2Nos. (1 working + 1 standby

Water Flow Rate : 520 LPM each pump (2Hrs of pumping)

Head : 45 to 50 M

Digitally signed by AKSHIT

Purpose : Domestic Water System 1 Set 40000.00 40000.00

CABLES & ACCESSORIES

XLPE INSULATED ARMOURED CABLES (ON SURFACE):

Supply, handling, testing and commissioning of following sizes of 1.1 KV grade XLPE core

insulated, extruded / wrapped PVC inner sheath, armoured / unarmoured extruded outer sheath

FRLS PVC, Copper / Aluminium conductor cables as per IS 7098 Part I ammended upto date. All

complete as required and as per final instruction as given by E.I.C / Consultants.

3 Core x 6 sq.mm., XLPE Copper Armoured Cable 20 Meter 266.00 5320.00

TOTAL OF WATER SUPPLY PUMPS AND ACCESSORIES / EQUIPMENT'S ₹ 5,320.00 ₹ 40,000.00

TOTAL OF ELECTRICAL WORKS ₹ 1,511,804.00 ₹ 666,606.00

FIRE FIGHTING SYSTEM

1.NOC from fire authority shall be in the scope of Contractor . Only fee paid to the fire authority shall be

reimbursed against the submission of the receipt and nothing shall be paid extra. 2. All the Fire Fighting

works shall be done in compliance of Fire Fighting authority requirement.

(A) Supplying, installation, testing and commissioning of electric driven terrace pump suitable for

automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)

(B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with

stainless steel shaft, mechanical confirming to IS: 1520

(C) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase,

18.4 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F'

insulation, conforming to IS-325.

(D) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.

(E) Suitable cement concrete foundation duly plastered and with anti vibration pads.

CONTROL PANEL FOR TERRACE PUMPS

Providing & fixing testing & commissioning of cubical type floor mounted fire control for operation of 2

nos terrace pumps panel fabricated from 16G M.S. sheet dully painted with stove enamaled finish of

approved shade and comprising of the following complete with interconnections for automatic operation

as required. Cost shall also include out going cable sof suitable size till the pumps

One Incommer 4 pole MCB

Two nos 63-amp 3 Pole MCB

D.O.L. starter suitable for main pump motor with overload relay, timer, push buttons and auto manual

selector switch 0 Set 75000.00 0.00

CABLES & TERMINATION

Supply, of following sizes of 1100 V grade Aluminium conductor armoured cables, XLPE insulated

PVC sheathed, conforming to IS 7098 Part 1 complete as required as reqd i/c termination

a) Control Cable 4 C x 1.5 sq.mm. 0 Meter 200.00 0.00

b) 3C x 10Sq.mm. Aluminium conductor 0 Meter 110.00 0.00

34.25 CABLE TRAY:

Digitally signed by AKSHIT

Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the

existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm

x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the

Engineer-in-charge and as per PWD General Specifications:

(i) Cable Tray Size 150mm x 50mm x 50mm (2mm thick) 0 Meter 877.00 0.00

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

PUMP ROOM PIPING & ACCESSORIES

Providing, laying, fixing and testing and commissioning of "C " class heavy duty MS Pipe conforming to

indian standard IS 1239:3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nut

CSR 28.107 bolts, gasket etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more

coats af synthetic enamel paint of required shade complete in all respects.

d 50mm internal diameter 0 Meter 654.53 0.00

g 100mm internal diameter 0 Meter 1440.86 0.00

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal

DSR/18.11 seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following

sizes as required :

NON RETURN VALVE

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:

5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required:

PRESSURE SWITCH

Providing and fixing of pressure switch of approved make in MS pipe line suitable for the pressure up

15kg/cm2 & including connection with main panel etc, as required complete in all respect. 0 Each 3606.33 0.00

PRESSURE GAUGES

28.121 Providing and fixing S.S. Pressure Gauge complete as required complete in all respect.

a Dial diameter 150mm calibration 0-16 Kg 0 Each 1027.61 0.00

Supplying & fixing air vessel made of 250mm. Dia, 8 mm thick MS sheet, 1200mm height with air

release valves on top and flanged connection to risers, drain arrangements with 25 mm dia gunmetal

wheel valves, with required accessories, pressure gauge and painting with synthetic enamel paint of

approved shade as required 0 Each 17412.02 0.00

TOTAL FOR FIRE PUMPS & RELATED EQUIPMENT / ACCESSORIES ₹ 0.00 ₹ 0.00

INTERNAL & EXTERNAL HYDRANT SYSTEM

INTERNAL HYDRANT

Providing, laying, fixing and testing and commissioning of "C " class heavy duty MS Pipe conforming to

indian standard IS 1239:3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nut

28.107 bolts, gasket etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more

coats af synthetic enamel paint of required shade complete in all respects.

(g) 100mm internal diameter 0 Meter 1440.86 0.00

Digitally signed by AKSHIT

Supplying, Installation, Testing and Commissioning standard Fire Man's axe with heavy insulated

rubber conforming to IS 936 complete in all respect. 0 Each 805.85 0.00

Supplying, Installation, Testing and Commissioning of G.M Double headed hydrant valve with

instantaneous Gun metal peet coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS

28.109 5290 (TypeA) with blank Gunmetal Cap and chain including orifice plate made of 6mm th Stainless steel

to keep the pressure not more than 3.5 per sqcm at any point complete in all respects.

Supplying, Installation, Testing and Commissioning of First Aid-fire Hose reel with MS construction

spray painted in post office red, confirming to IS 884 with upto date amendments, complete with rubber

28.115 hose pipe (IS:444/1987) 20mm dia 30 meter long type2, hose reel Drum with bracket as per IS:884,

20mm dia GM nozzle and 20mm dia GM gate valve as required complete with G.I pipe connention with

main pipe complete in all respect. 0 Each 9048.00 0.00

Supplying, Installation, Testing and Commissioning of RRL FIRE hose Type A, IS:636, 63mm dia x 15m

28.113 long with gunmetal male & female couplings (ISI marked) bound & riveted to hose pipes with copper

rivets and copper wire as required. 0 Each 4471.85 0.00

Supplying, Installation, Testing and Commissioning 63 mm dia gun-metal Branch Pipe (ISI marked) with

28.110 20mm (nominal internal dia) size Gun metal nozzle confirming to IS 903, suitable for instantaneous

connection to interconnect hose pipe coupling as required. 0 Each 1946.47 0.00

Supplying, Laying, Testing and Commissioning of ISI marked BUTTERFLY VALVE PN 1.6, with Gun

28.128 metal seal duly ISI marked complete with rubber insertion, nuts, bolts and washers, matching flanges of

required thickness, etc. complete as per specifications.

TOTAL FOR INTERNAL HYDRANT SYSTEM ₹ 0.00 ₹ 0.00

FIRE EXTINGUISHERS

28.124 B roviding and fixing of FIRE EXTINGUISHER, (4 KG CAPACITY ) ABC Powder type (stored pressure)

as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in

28.125 Providing and fixing FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as

per manufacturer's specification ISI Mark in all respect.

(c)4.5 KG. Capacity 6 Nos 6787.08 40722.48

28.126 Providing and fixing of FIRE EXTINGUISHER, Mechanical Foam Type 9 ltr IS: 15683 Stored Pressure

type complete with all accessories as per Manufactures Specification. ISI Mark of approved make

complete in all respect. 1 Nos 2848.26 2848.26

TOTAL FOR FIRE EXTINGUISHERS ₹ 56,536.74 ₹ 0.00

TOTAL OF FIRE FIGHTING WORKS ₹ 56,536.74 ₹ 0.00

SPLIT AC & ASOCIATED WORKS

Digitally signed by AKSHIT

Supply, Installation, testing and commissioning of 2.0 Ton, 5 Star Rating of BEE Air Cooled Split Type

Air Conditioners complete with indoor unit (IDU), Outdoor unit (ODU), surface / concealed coper

Refrigerant piping with insulation (EP Foam pipe section) up to 3 Mtr. (IDU to ODU) copper power cable

up to 4 Mtr. (at least 3CX 2.5 Sqmm, PVC Insulation, FRLS copper wire) (IDU to ODU), R-410 /R-32

Refrigerant , Remote, suitable for 230V +10% of 50 Hz, 1/3 phase AC supply capable of performing

cooling, dehumidification, air circulation of following capacity with rotary / Scroll compressor, with ODU

Supply, Installation, testing and commissioning of following nominal sizes of soft drawn copper

refrigerant piping for split AC system, jointing / brazing including accessories, insulated with tubular

insulation Suction and Liquid lines, all accessories as per specifications etc. as required :(Beyond 4

(a) for suction 12.7 mm 20 Meter 245.00 4900.00

(b) for discharge 6.35 mm 20 Meter 466.00 9320.00

Supplying, Installation, Testing and commissioning of rigid UPVC drain Piping of size 25 mm dia with

elbows, T- joints, sockets duly insulated with nitrile rubber insulation with adequate supports as per

specifications and instructions of Engineer-in charge i/c Charges for the work of brick and surface

cutting / chiseling for the purpose of recessed PVC drain /copper pipe and making the wall in good

condition by cement plaster etc as per site requirement including all raw material 60 Nos 250.00 15000.00

TOTAL FOR SPLIT AC & ASOCIATED WORKS ₹ 0.00 ₹ 299,220.00

WATER COOLER & RO SYSTEM

Supplying, installation, testing & commissioning of 40 Ltrs. water storage capacity & 40 Ltrs/hr. cooling

capacity full stainless steel body heavy duty water cooler,2 Nos taps complete with copper wound rotary

compressor, Drain pipe etc. including mechanical and electrical connections with suitable size 3 core

copper wire and plug complete as required. 1 Each 55000.00 55000.00

Supply, Installation, Testing and Commisioning of Water Filter/ Purifier UV Suitable for Online

Purification with following specifications

Pre Carbon block filter

Post Carbon block filter

Fully automatic operation with auto-on and

Auto–Off facility 1 Each 25000.00 25000.00

TOTAL FOR WATER COOLER & RO SYSTEM ₹ 0.00 ₹ 80,000.00

TOTAL OF HVAC WORKS ₹ 0.00 ₹ 379,220.00

LOW VOLTAGE SYSTEM

DATA NETWORKING

Supply, installation, testing & commissioning of DATA/VOICE/Wi-Fi system comprising of passive &

active components like CAT-6 UTP or improved data cable, patch panels,racks with wire manager

,flexible G.I pipe, PVC Conduit , etc complete with labeling/identification on the cable ,patch panels etc

required as per standards, drawings and specifications

UTP COMPONETS FOR DATA

Supplying and drawing of UTP 4 pair CAT 6A 23AWG LSOH LAN Cable in the existing surface/

recessed steel/ PVC conduit as required. 4 Pair CAT6A LHOS Unshielded, Twisted Pair (U/UTP)

Cable 500 mtr per Box. Yellow (RAIL 1018) in colour conforming to the following standards like

EIA/TIA 568-C.2, EN50173, EN52288, IEC 11801, IEC 61156-5, 500Mhz etc. Cat 6A U/UTP

cable with minimum bending radius when laying(mm) is 36 140 Meter 40.00 5600.00

34.15 (xxxii) Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing

and connection of existing switches and sockets and other petty material etc:-

Digitally signed by AKSHIT

(a) Modular Cover Frame One or Two Module 7 Each 34.00 238.00

Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M)

with brass lugs recessed in wall for mounting modular accessories including fixing and other petty

material etc., including the cost of cutting and filling up of chases (with finishing the surface):-

(a) Powder Coated Concealed Metal Box with Brass Lugs One/Two Module 7 Each 53.00 371.00

Supply, installation, testing & commissioning of CAT 6A UTP Universal (both tool & toolless)

information outlet 60603-7-4 2nd Edition, ISO/IEC TR 11801-9901-2014, ROHS Compliant. The I/O

should have minimum 750 mating cycle and 200 insertion cycle and UL approved,for Data, Voice, & Wi-

Fi at user end (I/O) in accordance with ANSI TIA 568 C.2, IEC 7 Each 180.00 1260.00

Supply, installation, testing & commissioning of CAT 6A UTP, LSZH Factory crimped Patch Cord as per

ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 1 Mtr for rack side switch to jack

panel connectivity. 12 Each 100.00 1200.00

Supply, installation, testing & commissioning of CAT 6A UTP, LSZH Factory crimped Patch Cord as per

ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 2 Mtr for Information outlet to

end user connectivity. 12 Each 200.00 2400.00

Supplying, installing, testing and commissioning of 24 port 1U Cat 6A UTP Patch Panels available

with block of four equipped with tool less IO, Rack Mountable. 19" Modular Patch Panel, loaded

CAT6A U/UTP 24 port LCS2 rack mountable to be compatible in 4nos of 6 X RJ 45 Tool less connector

U/UTP unit in a block. Standard & Approval : ISO 11801 2nd ED, EN 50173 2nd ED, EIA/TIA-568-B.2,

Supply, Installation, Testing & Commissioning of 24 Port Access Switches with switching capaticy of

128 Gbps, forwarding performance 92 Mpps, having 24 x 10/100/1000BASE-T PoE-plus(RJ45) with

minimum PoE budget of 370W, with 4 x 10G SFP+ uplink ports. Should Non Blocking architecture , 16K

MAC address. Should have Static Routing ,RIP,VRRP, OSPF from day 1,Should support ISSU from day

1 ,Should support stacking with min 12 members in a stack, Neighbor discovery, system logging, Telnet,

SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 198000 Hr complete

etc. as required. 1 Each 23500.00 23500.00

Supply Installation Testing & Commissioning of following indoor cabinet Rack with IP66 rated with Dual

Channel for rack mount support with FAN and MCB power supply. Rack should be air perfurated and

water proof . Rack body should be powder coated paint with rust free. Rack should have 2 cable

manger with sufficient socket PDU.

PVC, HDPE PIPES & PVC FLEXIBLE PIPES:

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI

marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, MS

saddle clamps and other petty materials etc., as per PWD General Specifications:- (For ckt wiring)

(i) Heavy Gauge PVC Conduit Pipe 20mm dia. (On Surface) 140 Metre 32.00 4480.00

TOTAL OF DATA NETWORKING ₹ 5,089.00 ₹ 48,960.00

FIRE ALARM SYSTEM

Digitally signed by AKSHIT

Supplying, installation, testing and commissioning of micro processor based intelligent addressable

main fire alarm panel, central processing unit with the following loop modules and capable of supporting

not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up

to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen

or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power

supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with

automatic charger. The panel shall have facility to connect printer to printout log and facility to have

seamless integration with analog/digital voice evacuation system (which is part of the schedule of work

under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for

IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.

Two Loop Panel. 1 No 239225.00 239225.00

Supplying, installation, testing & commissioning of central graphical fire alarm management system to

centrally monitor and operate the fire alarm system complete as required. 1 No 200611.00 200611.00

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector

complete with mounting base complete as required. 12 No 2858.00 34296.00

Supplying, installation, testing & commissioning of fault isolator complete with base as required. 4 No 3270.00 13080.00

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of

rise cum fixed tempreature thermistor complete with base as required. 1 No 2726.00 2726.00

Supplying, installation, testing & commissioning of addressable fire control module complete as

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

CABLING & WIRING

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper

conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene

Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath

complete as required. 120 Metre 359.00 43080.00

EXIT SIGN BOARD

Design, Composition, Supply & Installation of Led emergency light Material: Aluminium box+PMMA

board Size: 360*200mm Features: Overcharge protection Light source: 3W led lights Light color: White

led Voltage: AC90-260V 50/60Hz, AC110V~60Hz, AC220V~50Hz Battery:Ni-Cd1.2V Duration time:

90Mins or 3Hours Charging time: 24hour Automatically Power switch Finish: Double-side side printing

TOTAL OF FIRE ALARM SYSTEM ₹ 553,778.00 ₹ 20,000.00

Digitally signed by AKSHIT

Supply, installation, testing & commissioning of 5 MP Dome camera , ONVIF profile S , G& T ,UL , CE ,

FCC Certified ,1/2.7” Progressive Scan CMOS ,2.7 mm to 13.5 mm motorized varifocal lens , Quad

stream with each stream support H.265 compression simultaneously ,min illumination : Color 0.05lux @

F1.2(AGC ON) ; B/W 0 lux @ IR ON , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,WDR , Compression :

H.265/H.265+/H.264/H.264+ .SD card support upto 256GB , Alarm trigger - 1 input / 1 output , frame

rate : Main stream should support 25 fps@5MP ,Video analytics : Customer Flow staistics, Cross

COunt, Heat Map, Human & Vehicle Detection, Pedestrian Intrusion Detection & Line cross Detection.

Queue length detection, Regional population statistics, SOD-Stationaary Object Detection. , In built IR

LED , IR Distance upto 45 meters , IP 66 ,IK10,POE.Audio -1 input/1 output complete etc. as required.

Supply, installation, testing and commissioning of 5 MP Bullet camera ,ONVIF profile S,G & T. UL , CE

, FCC,BIS Certified,OEM defined MAC address,1/2.7” Progressive Scan CMOS ,3.6 mm motorized

varifocal lens , Quad stream Each stram support H.265 compression simultaneously ,min illumination :

Color 0.05lux @ F1.2(AGC ON) ; B/W 0 lux @ IR ON , Shutter speed : 1 / 5s ~ 1 / 100,000 s , WDR ,

Compression : H.265/H.265+/H.264/H.264+ .SD card support upto 256GB , frame rate : Main stream

should support 25/30 fps@5MP, Built in Mic, Video analytics : Customer Flow staistics, Heat Map,

Human & Vehicle Detection, Pedestrian Intrusion Detection & Line cross Detection. Queue length

detection Regional population statistics, SOD-Stationaary Object Detection, Motion Detection, Tempring

Detection, Rare Sound Detection, License Plate Detection. Defog. Protocols:- TCP/IP, HTTP, DHCP,

DNS, DDNS, RTP/RTSP, SMTP, NTP, UPnP, SNMP, HTTPS, FTP, P2P, UDP,PPPoE, Bonjour. In built

IR LED , IR Distance upto 30 meters , IP 66 , POE complete etc. as required..

Supply, installation, testing and commissioning of 5 MP PTZ Camera , UL,CE,FCC Certified , ONVIF

profile S,G & Q , Quad stream,4.3-141.9mm focal length , 33 X Optical Zoom , 12 X digital Zoom

,Frame rate : 20 fps ,Shutter Speed : 1/5 ~ 1/100,000s , Inbuilt IR , IR distance upto 200 mtr , 2D / 3D

noise reduction ,120 dB WDR , 360 deg endess pan , tilt -10 to 90 deg , auto flip support ,255 presets

,Auto pan ,Edge analytics : Pedestrian Intrusion Detection, Line cross Detection, Heat Map,Cross

Count,Stationaary Object Detection, Vehicle Detection, face Detection, , SD Card supportup to 128GB ,

white balance-Auto/manual/indoor ,Fixed Iris, Alarm : 1 IN , 1 Out , Audio - 1 IN/1

Out,RS485,ROI,1xBNC IP 66 weather proof , Power : 24V AC/ POE+ /DC12V complete etc. as

Supply, installation, testing and commissioning of 32 channel NVR , ONVIF compliant , recording

bandwidth 640 Mbps , output interface 1 HDMI (up to 4K), 1 VGA , Alarm in/out :16ch in / 4ch out , 1 X

RJ45 ethernet , iOS smartphone support , 4 HDD support , each HDD slot support upto 8 TB HDD ,

1x3.0 USB for backup /upgrade , 2x 2.0 USB for mouse .Edge analytics of poposed cameras must be

integrated with NVR . Artificial Intelligence Support having face recognition with compatible deep

learning supported cameras, AIFace registered quantity upto 10,000 ,A.I maximum captured quantity

200,000. UL,CE,FCC certified complete etc. as required..

Supply, installation, testing & commissioning of 8TB Surviellance Hard Disk complete etc. as required..

Supply, installation, testing & commissioning of Full HD 55" LED Professional Display Panel having 350

NITS and above brightness, complete as required 1 Nos 32500.00 32500.00

Digitally signed by AKSHIT

Supply, installation, testing & commissioning of Workstation PC: Intel(R) Core(TM) i7-3770 Processor

(8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) NonECC DDR3 1600MHz ; Keyboard: 12 function

keys; Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/- RW, Data Only; Dual Graphics Card;

Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; Hard disk:

250GB, 7200 RPM 3.5" SATA 6Gb/s Hard Drive; Operating system: Windows 7 Professional 64 Bit or

latest complete etc. as required.. 1 Nos 45000.00 45000.00

TOTAL OF CCTV SYSTEM ₹ 0.00 ₹ 478,000.00

TOTAL OF ELV SYSTEM WORKS ₹ 558,867.00 ₹ 546,960.00

Supplying, Installation, Testing & Commissioning of 8 passenger (680 Kg ) NS/MRL lift having contract

speed of 1.00 MPS serving different floors in the lift shaft and having barrier free requirements as per

Appendix-VII of CPWD General Specifications for Electrical Works ( Part-III-Lifts & Escalators), 2003

and as per detailed specifications enclosed as under :-

Speed - 1.00 MPS

Floors to be served - Stlit + 3 nos Floors

Travel - 16 Meters ( approx.)

Stops & Opening -Four on same side

NS/MRL with polyurethane belt

Machine: Gearless machine with permanent magnet synchronous motor.

Controller - Modular control microprocessor system combined with variable frequency and variable

voltage system which can be located in door column at the top floor

Control - Variable frequency with closed loop vector control.

Operation - Automatic, microprocessor based, duplex collective selective with / without attendant

Power - 415 V, 3 Phase, 50 Hz, AC , 4 wire system

Door Operation -Variable speed with close loop control.

Type of doors (With Vision Panels)

Car Entrance - Centre opening power operated horizontal sliding doors in stainless steel hairline finish

Landing doors - Stainless steel in hairline finish with infrared door protection device.

Clear Opening of Doors - 800 mm ( W) x 2000 mm ( H)

Position of Machinery - To be placed directly above hoist way.

Flooring - Vinyl Tile.

Lighting - Diffused Lighting in car

Signals :- Car operating panel in stainless steel, digital up down indicator, emergency light and alarm.

Other Features -

Battery Operated Emergency Light with Rechargeable Battery.

Battery Operated Emergency Alarm with Rechargeable Battery

Adjustable Guide Shoes

Micro Movement L.E.D. Based Buttons

System Capable of withstanding (+) 10% to (- )10% variation in supply voltage fluctuations

Hands free press and speak intercom

Steel items such as machine beams, door frames sill angles, fascia plates, spring buffers

Full height infrared safety curtain with 74 intersecting beams

Car platform constructed out of cold rolled grain oriented formed sheets of steel

Fire man switch at main lobby

Car false ceiling in stainless steel in mirror finish with concealed CFL lights

Motor tested for 180 starts per hour

Digitally signed by AKSHIT

Automatic rescue device to automatically bring the elevator to nearest landing in case of power failure

with SMF battery backup of 30 minutes. There shall be an automatic phase reversal correction device

which will automatically align the supply phases in case of phase reversal. Mechnical Rescue divice

also need to be provided.

Digital lift announcement system shall be provided in car only to give an audio visual confirmation of

elevator arrival. However the visual indicators shall also be provided at each floor to indicate car

TRACTION SHALL BE BY MEANS OF FLAT POLYURETHANE COATED STEEL BELTS

Complete in all respect including providing & fixing guide rails, minor building works, scaffolding, putting

into operation & final testing etc. as reqd. 0 nos 1250000.00 0.00

TOTAL OF ELEVATOR WORKS ₹ 0.00

SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM

Supply, Installation, Testing and Commissioning of on grid Solar Photovoltaic Power Plant

conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon

solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI

structure of suitable strength with following components complete as required:-

a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India,

conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-

Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules

used in solar power plants/ systems must be warranted for their output peak watt capacity, which

should not be less than 90% at the end of 10 years and 80% at the end of 25 years.

b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three

phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less

than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0

to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage

c) Data Monitoring System complete with accessories.d) Fixing of Array junction box & Main junction

box with IP 65 protection and termination arrangement for incoming and outgoing cable along

with glands, lugs and other accessories etc. as required.e) Lightning and surge voltage protection.f)

Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor

1.1 kV grade armoured power and control cables between solar modules, main power cable to

grid supply PCU unit along withsupplying & fixing of necessary channel/conduit lugs and other

accessories etc. as required. Solar cable shall be Flexible Tinned Copper Conductor Single Core( 2

Runs for +ve and -ve) Multistrand, Cross Linked, Zero Halogen Low Smoke Insulation and

CrossLinked Low Smoke Sheathing ,Heat Resistant upto 120⁰C and UV Resistant Solar Cables

between solar modules Array junction box and PCD unit

TOTAL OF SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM ₹ 271,400.00 ₹ 0.00

Supply , installation , testing and commissioning of EV Charging station of the following complete

with following specification.

Input Voltage (VAC) 1-Ph 230V (+/- 10%) Output Voltage (V) 3.3kW AC Max. Output Power Rating

(a) (kW) RFID / Mobile App based User Authentication LAN / 4G / WiFi Charger Interface Indoor / Outdoor

Place of Installation IP65 Ingress Protectio 0 Each 75000.00 0.00

Digitally signed by AKSHIT

Input Voltage (VAC) 1-Ph 230V or 3-Ph 400V Output Voltage (VAC) 7.4kW, AC Max. Output Power

(b) Rating (kW) 4.3" TFT Color Touch Screen Display RFID / Mobile App based User Authentication PWM

as per IEC 61851-1 / IS 17017 Charger and Vehicle Communication LAN / 4G / WiFi Charger Interface

Indoor / Outdoor Place of Installation IP55 Ingress Protection 0 Each 125000.00 0.00

TOTAL OF EV CHARGING ₹ 0.00 ₹ 0.00

Digitally signed by AKSHIT

SUMMARY E&M WORKS

SR. NO. TRADE DESCRIPTION AMOUNT

PART - I ELECTRICAL WORKS

1 POINT & CONTROL WIRING IN PVC CONDUIT, ETC. ₹ 879,743.00

2 LIGHT FIXTURES AND FITTINGS, CEILING FANS, SENSORS ETC. ₹ 134,872.00

3 MEDIUM VOLTAGE PANELS ₹ 445,000.00

4 DISTRIBUTION BOARDS & MINIATURE CIRCUIT BREAKERS ₹ 79,353.00

5 LT CABLES, TERMINATIONS, & CABLE TRAYS ETC. ₹ 166,991.00

7 EARTHING SYSTEM ₹ 169,952.00

8 LIGHTNING PROTECTION SYSTEM ₹ 68,136.00

9 SAFETY EQUIPMENTS FOR ELECTRICAL INSTALLATION ₹ 9,590.00

10 EXTERNAL LIGHTING ₹ 179,453.00

11 WATER SUPPLY PUMPS AND ACCESSORIES / EQUIPMENT'S ₹ 45,320.00

TOTAL OF ELECTRICAL WORKS ₹ 2,178,410.00

PART - II FIRE FIGHTING SYSTEM

A FIRE PUMPS & RELATED EQUIPMENT / ACCESSORIES ₹ 0.00

B INTERNAL HYDRANT SYSTEM ₹ 0.00

C FIRE EXTINGUISHERS ₹ 56,536.74

TOTAL OF FIRE FIGHTING WORKS ₹ 56,536.74

PART - III HVAC WORKS

A SPLIT AC & ASOCIATED WORKS ₹ 299,220.00

B WATER COOLER & RO ₹ 80,000.00

TOTAL OF HVAC WORKS ₹ 379,220.00

PART - IV ELV SYSTEM

1 DATA NETWORKING ₹ 0.00

2 FIRE ALARM & DETECTION SYSTEM ₹ 0.00

3 CCTV SYSTEM ₹ 1,105,827.00

TOTAL OF ELV SYSTEM WORKS ₹ 1,105,827.00

PART - V ELEVATOR WORKS

1 PASSANGER LIFT ₹0

TOTAL OF ELEVATORS WORKS ₹ 0.00

PART - VI SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM

1 SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM ₹ 271,400

TOTAL OF SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM ₹ 271,400.00

PART - VII EV CHARGING

1 EV CHARGING 0.00

TOTAL OF EV CHARGING ₹ 0.00

Digitally signed by AKSHIT