REPAIR / MAINT TO SEWAGE LINE, SEPTIC TANK AND CONNECTED ITEMS FOR OLD MED COMPLEX, 31 RR AND ADJOINING AREA UNDER AGE B/R-I OF GE (N) UDHAMPUR.

Amount

M&L for systematically cleaning of blockage of WC Indian, Orrisa pattern or European type and bathroom / kitchen including cleaning of Nahani traps/ gully traps/ floor trap by removing of all the mud/ sludge and getting out in including cleaning of SGSW or CI pipe upto 1st manhole and depositng the sludge in a pit of suitable size at a distance not exceeding 50 metres from the gully trap and covering the same with the soil obtained from excavation of of pit including all excavations and earth work, complete all as specified and directed by Engineer-in-Charge. Notes :- (a) The contractor or his authorised representative shall collect the complaints of all blockage from complaint cell / Engr-in-Charge daily and all complaints will be rectified by the contractor with in same day and returne the complaint slip after completion of complaint and get receipt from concerned JE/ Engr-in-charge. If he fails to complete the work with in same day then recovery will be made @ Rs 50.00 per complaint per day. (b) Work shall be done in foul conditions, necessary precautionary measures/ equipments to be adopted by the contractor. (c) Any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engr-in-Charge without any extra cost to Govt.

M&L for systematically cleaning of the sewage lines including gully traps by passing ropes, knots, bamboo/ wire/ kandi rotary, cleaner etc for any dia of sewage pipe, complete all as specified and directed by Engineer-in-Chrage.

Cleaning and desludging of manholes of any size, shape and any depth including pumping out liquid waste if any, removing all solid waste materials such as stones, bricks, pipes, plastic muds etc, pluggings/ diverting of flow if required and removing the debries outside MD land etc including all precautionary and safty measures, complete all as specified and directed by Engineer-in-Charge.

M&L for cleaning and desludging & de-watering of existing septic tanks for 100 users and opening covers and including inlet and outlet chambers and soakage well, taking out sludge and sewage water in any form alongwith all other foreign materials by mechanical equipment or by way of other suitable means and removing waste material/ sludge etc. to outside MD land including digging, burrying in ground (Qty of desludging/ dewatering taken out not exc 12.0 Cum from each septic tank), complete all as specified and directed by Engineer-in-Charge. Notes :- (a) Work shall be done in foul conditions, necessary precautionary measures/ equipments to be adopted by the contractor. (b) The solid or semi solid sludge shall be burried in pits and fully covered with a layer of lime powder and earth. (c) Rates quoted by the contractor shall be deemed to have considered all such contingencies including removal and refixing manhole covers. (d) Any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engineer-in-Charge without any extra cost to Govt.

All as per serial item No. 4.00 here-in-above but 50 users capacity (desludging not exc 6.0 Cum and dewatering not exc 6.0 Cum from each septic tank), complete all as specified and directed.

All as per serial item No. 4.00 here-in-above but 25 users capacity (desludging not exc 4.0 Cum and dewatering not exc 4.0 Cum from each septic tank), complete all as specified and directed.

Excavation in trenches, not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation or for shafts, manholes, pier holes etc, not exc 10 Sqm on plan and getting out in any type of soil, complete all as specified and directed.

M&L for HDPE DWC (double wall corrugated) pipes, confirming to IS-16098, of 180mm internal dia, presure rating SN-8, fixed with rubber seal and copler required with and including suitable bends 90/60/45 degree etc. single 'Y' junction, complete as required fixed as per manufacturer's instruction, laid in trenches for sewage lines, complete all as specified and directed. Note :- Rates included for taking out old sewage pipe of any type and dia, bends any size and type 'Y' Jn coupler / adaptor etc. required and net total length of pipe with fittings shall be measured for payment purpose.

M&L for HDPE DWC (double wall corrugated) pipes, confirming to IS-16098, of 150mm internal dia, presure rating SN-8, fixed with rubber seal and copler required with and including suitable bends 90/60/45 degree etc. single 'Y' junction, complete as required fixed as per manufacturer's instruction, laid in trenches for sewage lines, complete all as specified and directed. Note :- Rates included for taking out old sewage pipe of any type and dia, bends any size and type 'Y' Jn coupler / adaptor etc. required and net total length of pipe with fittings shall be measured for payment purpose.

M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.

M&L for 200mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.

M&L for 450mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, bed for laying of sewage lines or mass concrete, complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed.

Removing excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) of any dia, set in cement mortar, complete all as specified and directed.

Dismantling of 75/100mm dia (internal) cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from trenches or taking down from from walls, complete all as specified and directed.

S&F 100mm dia (internal) sand cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, complete all specified and directed.

S&F 100mm dia (internal) sand cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall with MS clamps of suitable size, complete all specified and directed.

Re-fixing of 100mm dia (internal) sand cast iron soil, waste and vent pipes (except pipes), in any length but including with stack clamp etc, complete all as specified and directed.

S&F 75mm dia (internal) sand cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall with MS clamps of suitable size, complete all specified and directed.

Re-fixing of 75mm dia (internal) sand cast iron soil, waste and vent pipes (except pipes), in any length but including with stack clamp etc, complete all as specified and directed.

S&F in replacement 100mm bore sand cast iron bends/ reducer/ Tee (any radius) with access door, diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

S&F in replacement 75mm bore sand cast iron bends/ reducer/ Tee (any radius) with access door, diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

S&F in replacement 100mm bore sand cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and directed.

S&F in replacement 75mm bore sand cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and directed.

S&F in replacement CI vent cowl for 100mm bore pipe, complete all as specified and directed.

S&F in replacement CI vent cowl for 75mm bore pipe, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends swan necks etc. including cleaning or re-fixing or removal to store (measured overall as fixed along the centre line over fitting and accessories), complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls with stack clamps with nuts and bolts, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls with stack clamps with nuts and bolts, complete all as specified and directed.

S&F PVC (SWR) bends with access door, any radius of bore 110mm, complete all as specified and directed.

S&F PVC (SWR) bends with access door, any radius of bore 75mm, complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y/T) equal or unequal of bore 110mm, complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y/T) equal or unequal of bore 75mm, complete all as specified and directed.

Taking down cement plaster of any description on brick work or stone masonry or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 15mm thick cement plaster on the fair face of brick work or concrete surface in cement mortar 1:4 with using water proofing compound, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- Rates for WPC shall be deemed to include in the quoted rates.

Demolition of brick work or stone masonry, built in cement mortar including all quoins arches, pillar etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed.

All as per serial item No. 41.00 here-in-before but except bricks. Note :- Old bricks obtained from serial item No. 40.00 here-in-above shall be used.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4, complete all as specified and directed.

All as per serial item 43.00 here-in-above but except stone. Note :- Old stones obtained from serial item No. 40.00 here-in-above shall be used.

M&L for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection including making joints 10mm wide and 30mm deep at spacing not more than 2.5 mtr and at corners as mandatory and filled with sealing compound grade A and finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in coping etc. including necessary formwork as required, complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in surface channel or drain including necessary form work as required, complete all as specified and directed.

M&L for RCC (Nominal Mix) 1:2:4 type B-1 (using 20mm gradded crushed stone aggregates) as slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Use and waste of formwork to rough finished concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

Dismantling of wrought iron / mild steel / steel works of any description and in any position, complete all as specified and directed.

M&L mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, staging for water tanks and similar work, conforming to Fe-290 Gde-E-165, complete all as specified and directed.

M&L MS TMT bars 8mm dia and over as in reinforcement for concrete, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) as in ground floor and paving, not exe 15cm thickness (below or above ground level), complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.

S&F in replacement wash down water closet (Pedestal pattern), complete with pedestal pan and trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. including PVC seat and cover, complete all as specified and directed.

S&F in replacement PVC low level flushing cistern of capacity 10 ltr, white with inlet, ball valve, float and handle including breckets, flush pipe of polyethylene of low or high density or PVC 32mm dia and connection to pipes, complete all as specified and directed.

S&F in replacement wash basin, vitreous china (flat back or angle back type) of size 550x400mm with pedestal height 800mm including cutting for and pinning in ends of brackets or erecting stand including CP waste coupling of 32mm and PVC waste pipe of 32mm dia, complete all as specified and directed.

S&F in replacement vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) but including waste coupling, urinal spreader with PVC connections and waste pipe, complete all as specified and directed.

M&L for chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, coloured with grey cement and admixtures, laid/ fixed over and including 15mm thick screed bed in cement mortar 1:4 as in floor, set, jointed and pointed in neat cement slurry, complete all as specified and directed.

M&L for machine pressed rubber moulded manufactured/ compacted by vibrating table method precast concrete interlocking paver block, laquor finish, any shape and size, confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and joints filled with sand, complete all as specified and directed.

Re-fixing of interlocking tiles of any size and thickness, laid dry in position over sand cushioning including dismantling of existing tiles, complete all as specified and directed.

M&L for sand filling under floors, paver blocks or in foundation including watering and consolidation, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

M&L for treatment of sunken floor surfaces with 0.488 Kg/Sqm first layer of slurry of cement mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm. This layer shall be allowed to be cured for 4 hours and then applying in second layer slurry of cement @ 0.242 Kg/Sqm mixed with acrylic based polymer based modified cementitious composite compound @ 0.126 Kg/Sqm. This layer shall be allowed to be cured for 4 hours including taking down old/ existing treatment with wire brusing and clearing the dust and foreign material before new treatment and incuding one GI light grade 450mm long 32mm dia spout to each sunken floor, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces or on roof surfaces in cement mortar in CM 1:3, finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for plain cement concrete 1:5:10 type E-2 (using 40mm graded crushed stone aggregates) as in sunken portion treatment etc, complete all as specified and directed.

S&F in replacement vitreous china squalting pan, orissa pattern of size 580x440mm, white with integral foot rests, 'P' or 'S' trap long body with integral foot rest and fixed with cement concrete bedding, complete all as per specified and directed.

M&L for non skid ceramic coloured tiles, 7 to 8mm thick (square/ rectanglear), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor, skirtings etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for 10mm thick vitrified light shade ceramic tiles (square/ rectangular), polished, area of each tiles not exceeding 0.36 Sqm as in floors, skirtings etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for glazed ceramic coloured digital tiles as on vertical surfaces of walls, size eah tile 450mm x 300mm x 7mm thick as approved pattern (Approved by GE), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in floor, base of tiles, complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

M&L for prepration of new plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant cement base primer, complete all as specified and directed.

S&F in replacement PVC flexible urinal pipe of 50mm dia, 900 long, complete all as specified and directed.

S&F in replacement PVC flexible waste pipe of 32/40mm dia for wash basin / sink, complete all as specified and directed.

sohtra and co (BID ID -3290136)

PRATAP TRADING CO (BID ID -3289887)

KUMAR CONSTRUCTION CO (BID ID -3289742)

KOHLI CONSTRUCTION CO (BID ID -3289435)