Upgradation of Service Entry Portal at TVS Gate including Physical protection systems,Electrical works, Air conditions and civil and misc. works at BARC,Trombay, Mumbai.

Amount

Section- A (PPS Works) SITC of Tripod- 500mm arm length as per TSS No. P01

SITC of Dummy tri-pod box as per TSS No. P02

SITC of Door Frame Metal Detector- 8 zone as per TSS No. P03

SITC of Hand Held Metal Detector as per TSS No. P04

SITC of Xray Baggage Inspection System including Entry/Exit rollers and PC as per TSS No. P05

SITC of X-ray Baggage Inspection System 1000mm Tunnel - including Entry/Exit rollers and PC as per TSS No. P06

SITC of outdoor IP PoE IR Bullet Camera with 3 - 9 mm lens as per TSS No. P07

SITC of Indoor IP PoE IR Dome Camera with 3 - 9 mm lens as per TSS No. P08

SITC of 16 POE channel Network Video recorder with 8 TB HDD as per TSS No. P09

SITC of Panel PC with Wall mount for CCTV System as per TSS No. P10

SITC 8 Port POE Outdoor Industrial Grade Switch with Power supply as per TSS No. P11

SITC Weather proof Junction Box for Industrial Switch approx. 400x400x210mm as per TSS No. P12

SITC of 32mm dia HDPE Pipe as per TSS No. P13

SITC of Extension arm for Outdoor Bullet Camera as per TSS No. P14

Supply of Wrist-mountable RFID Reader as per TSS No. P15

Supply of Embedded Electronic Guard Tour Management Interface unit as per TSS No. P16

Supply of Charging & data sync cradle for two wrist readers as per TSS No. P17

SITC of Key Management System with 48 keys and 8 mini lockers as per TSS No. P18

SITC of SAM Based RFID Card Reader with Fingerprint Verification and external power supply as per TSS No. A1

SITC of Handheld RFID reader with NFC as per TSS No. A2

SITC of 12.1” Panel PC with HDD and license copy of OS as per TSS No. A3

SITC of Fixed Dome Network Camera having Built-in PoE with compatible single port PoE Injector as per TSS No. A4

SITC of 24-port, 10/100/1000 Mbps, PoE-capable and 4 x 10GSFP+ Rack mount managed Ethernet Switch as per TSS No. A5

SITC of All-in-one PC with table mount as per TSS No. A6

SITC of IRIS Scanner as per TSS No. A7

SITC of Iris Recognition SDK License as per TSS No. A8

SITC of Fingerprint Recognition Device as per TSS No. A9

SITC of Dual Interface USB Smart Card Reader as per TSS No. A10

SITC of HD Web Cam as per TSS No. A11

SITC of 7 Port Powered USB 2.0 Hub as per TSS No. A12

SITC of Black and White Laser Printer along with 1 no. of additional replacement cartridge as per TSS No. A13

SITC of Video Management Software as per TSS No. A14

SITC of PTZ Dome Network Camera having Built-in PoE with accessories as per TSS No. A15

Section- B (Electrical Works)SITC of 10kVA modular UPS along with battery bank as per TS1

SITC of indoor recess lighting fixture as per TS2

SITC of Outdoor Lighting Fixtures as per TS3

SITC of wall mounted fan as per TS4

SITC of 3Cx2.5 sq mm TRS cable as per TS5

SITC of 4Cx25sqmm, Al cond LT cable as per TS6

End termination of 4Cx25sqmm, Al cond LT cable as per TS7

SITC of 105mm x 50mm PVC DLP trucking as per TS8

SITC of Primary Power point as per TS9

SITC of Secondary Power point as per TS10

SITC of Primary Light point as per TS11

SITC of Secondary Light point as per TS12

SITC of primary wall fan/air curtain point as per TS13

SITC of secondary wall fan/air curtain point as per TS14

SITC of AC point as per TS15

SITC of UPVC FRLS HMS conduit along with all accessories required as per TS16

Installation testing and commissioning of PPI DBs as per TS17

SITC of 8 way VTPN DB as per TS18

SITC of 2 loop fire alarm panel as per TS19

SITC of multi sensor detector as per TS20

SITC of MCP as per TS21

SITC of hooter as per TS22

SITC of fire alarm cable as per TS23

SITC of response indicator as per TS24

SITC of Aluminium Trunking of size 150mm x 50mm as per TS25

SITC of Aluminium floor mounted power column as per TS26

SITC of SP MCB as per TS27

Supply and installation of 32mm casing capping as per TS28

Dismantling/Removal of existing electrical services/accessories as per TS29

SITC of 12U wall mounted rack as per TS30

SITC of 24 port jack panel as per TS31

SITC of data points as per TS32

SITC of telephone points as per TS33

SITC of cat 6 cable as per TS34

SITC of 100 mtr OFC Patch cord as per TS35

SITC of 3 mtr Cat 6 Patch cord as per TS36

SITC of 24 ports Ethernet switch as per TS37

SITC of 8SWG copper wire as per TS 38

Self Illuminated Signages as per TS 39

SITC of laser multifunction printer as per TS40

SITC of LED Flood light as per TS 41

Section- C ( Air-conditioners Works) High Wall Split Air-conditioners (Inverter Type) : Supply, installation, testing & commissioning of following variable speed split air conditioners comprising of one indoor unit, one out door unit having copper condenser coil & one cordless remote control for each machine suitable for minimum total pipe length of 25 meter & elevation difference of 10 meter as per clause no. AC1 of technical specification. (MS structure/stand/support etc. shall be paid under relevant civil item)

2 .0 TR (nominal capacity) high wall mount split air conditioners with min 3 star rating.

1.5 .0 TR (nominal capacity) high wall mount split air conditioners with min 3 star rating.

Copper tubing with nitrile rubber insulation: Supply and installation of good refrigeration quality copper tubing as per clause AC2 of technical specification.

Supply and installation of good refrigeration quality copper tubing for High Wall Split AC of minimum 24 gauge thick along with sleeve type insulation wrapped with monsoon tape for interconnecting indoor unit (IDU) with outdoor unit (ODU) of split air conditioner of following capacities. (NB: Each running meter of copper tubes will consists of one meter each of suction & discharge line, three core x 4.0 sq mm or suitable cable and insulation together).

PVC flexible drain line: 15 mm or suitable dia reinforced PVC drain line wrapped with insulation tape.

PVC DLP Casing-Capping: Supply and installation of 105mm x 50mm cross sectional size required to enclose refrigerant piping along with thermal insulation, cabling and drain piping at site as per clause TS8 of technical specification..

Installation of 100mm x 50mm cross sectional size required to enclose refrigerant piping along with thermal insulation, cabling and drain piping at site. (100mm x 50mm casing-capping shall be supplied by the department)

Supply and installation of 50mm x 50mm cross sectional size required to enclose separate drain piping at site.

Air Curtain :-Supply, installation, testing and commissioning of air curtain as per following details & clause AC4 of technical specification.

a) Material of body : Aluminium Powder Coated b) Material of impeller : Plastic/metallic c) Size : 1500 mm approx. d) Grill : ABS plastic e) Power : Single phase continuous rating f) Speed : Two – High & Low (Switched Operated)

a) Material of body : Aluminium Powder Coated b) Material of impeller : Plastic/metallic c) Size : 1200 mm approx. d) Grill : ABS plastic e) Power : Single phase continuous rating f) Speed : Two – High & Low (Switched Operated)

Motion Sensor for air curtains and associate wiring.

Fresh air unit (DX type) Supply, installation, testing and commissioning of double skin DX type, two independent coiled fresh air unit of following capacity including standard accessories as per clause no. AC5 of section-I of technical specification. Capacity : 500 cfm St. Pressure : 40 mm of WC Coil : Inter twined coil

Air cooled condensing unit : Supply, installation, testing and commissioning of microprocessor based air cooled packaged condensing unit of cooling capacity 5.5 TR and copper coil along with associated accessories as per clause no. AC6 of section-I of technical specification.

Ducting with insulation cladding: Supply of sheet, duct fabrication, installation and air flow balancing of the system at site. The duct shall be fabricated out of following material & thickness sheets 1.6 mm thick Aluminium sheet duct with 19 mm nitrile rubber insulation and 0.6 mm thk Aluminium cladding as per clause no. AC7 technical specification.

Removal & reinstallation of split air conditioners: Removal & reinstallation of existing split air conditioners. The removed air conditioners shall be installed at desired location inside the BARC. Cost of piping, drain, casing capping shall be paid under relevant item.

Section- D (Civil & Misc. Works) Dismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge

Dismantling of RCC works carefully manually without damaging adjacent structures excluding cutting of reinforcement including stacking of steel reinforcement bars and disposal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge

Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Demolishing Stone rubble masonry (In cement mortar) manually / by mechanical means carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Taking out doors, windows and clear storey openings (steel / wood) shutter including stacking within 100 m lead (only shutters) Of area 3.00 Sq.M and below

Taking out doors, windows and clear storey openings (steel / wood) shutter including stacking within 100 m lead (only shutters) Of area beyond 3.00 Sq.M

Dismantling steel work in single sections including dismantling and stacking within 100 m lead In R.S Joists, Angles etc.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 100 m lead

Dismantling Aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge

Dismantling G.I pipes of all diameter external work including excavation and refilling trenches after taking out pipes manually / by mechanical means including stacking of pipes within 100 m lead as per direction of Engineer-in-charge

Dismantling the following dia of C.I pipes including excavation, taking out the pipes manually / by mechanical means, breaking lead caulked joints, melting of lead, making into blocks including stacking of pipes within a lead of 200 m as per direction of Engineer-in-charge

75 mm Dia to 200 mm Dia C. I pipe

Lead charges for lead Exceeding 4 KM not exceeding 5 KM, by mechanical transport including loading, unloading, stacking / levelling etc.

Debris Beyond 4 Km but up to and including 5 km

From 0.00 to 1.50 m depth from Average Ground Level

Lead charges for 1st 1 KM or part thereof, by mechanical transport including loading unloading, stacking / levelling etc.

For soil Note :- Deductions for voids shall be made from truck measurements for soil, @ 20% from corresponding stack/truck measurement.

Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specifications and drawings but excluding the cost of Form work shuttering, centering Complete at all levels

Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels

Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticizer or super plasticizer) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level.

In substructure (at plinth level & below).

Extra for RCC and PCC Using Ready Mix Concrete from outside project area including transporting and pumping from approved batching plants .

Providing, centering, shuttering, Form work using PVC Film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, propping, staging, supports etc. and deshuttering the same after the specified time all as per drawings and specifications at all levels.

In substructure

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. "Using TMT bars of specified grades all dia. bars TMT bars confirming to IS 1786. All test reports to be provided along with the supply of the materials." Steel Supplied by the Contractor

Using TMT Bars of grade Fe 500D of all size bars of ISI Marked make only. Note- 1)PVC coated binding wire required for the work will have to be supplied by the contractor at their own cost and will not be measured for payment. 2) Cover blocks shall be of same grade of concrete

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge

Up to and including 300 mm Joists, 350 mm channels, and below sections using materials of approved manufacturers to confirming to IS 2062. All test reports to be provided along with the supply of the materials.

Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc. including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc. including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Using materials of approved manufacturers or of approved equivalent quality or product meeting technical parameters. All test reports to be provided along with the supply of the materials

Supplying, fabricating and delivering and fixing at site MS anchor bolts as shown in drawing or as directed by Engineer-in-charge, including nuts/lock nuts, anchor bolt assemblies etc. complete.

Providing and constructing Random Rubble masonry using spotless black trap or approved local stone in foundation and plinth in C.M 1:6 (using 100% Manufactured Sand) including raking out joints or simultaneous flush pointing below ground level / plinth level, including levelling the masonry with cement concrete 1:6:12, curing etc. complete as per drawings and specifications.

Providing and constructing Brickwork in cement mortar 1:6 using crushed sand with Fly ash / Fly ash Lime bricks with minimum 70 kg / Sq. cm strength of approved make and size in Sub structure including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.

Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Fly ash / Fly ash Lime bricks with minimum 70 kg / Sq. cm strength of approved make and size in Sub structure including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.

Providing and constructing Half brick masonry using Fly ash/ Fly ash Lime bricks in substructure with minimum 70 kg / Sq.cm strength of approved make and size in partition walls in C.M 1:4 using crushed sand including scaffolding, raking out joints, curing etc. complete and with stiffeners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement. (Reinforcement will be paid under relevant item)

Providing 15 mm thick Internal plaster in cement mortar 1:4 without cement punning (using Crushed Sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete.

Providing Raised and cut pointing on stone with cement mortar 1:3 using crushed sand as per specifications and as directed at site by the Engineer-in-charge.

Providing 20 mm thick External plastering in two coats under layer 12 mm thick with C.M 1:4 (using crushed sand) finished with a top layer 8 mm thick in C. M 1:3 (using crushed sand) including approved water proofing compound @ 2% by weight of cement or as per manufacturer's specifications, sieving of sand to required fineness, scaffolding up to 10 meters height, finishing, curing etc. complete as per specifications. and as directed by the Engineer-in-charge

Providing and fixing Glazed VITRIFIED floor tiles /skirting tiles of approved make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge. Using Tiles of size 600 X 600 mm

Add Extra for polymer mortar in place of cement mortar for skirting Vitrified tiles

Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge

Labour charges for mmurrum filling under floors of specified thick in layers of not exceeding 150 mm thickness including consolidation etc. complete (using mmurrum available at site in side BARC)

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P brass / stainless screws all complete as per drawings and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealant etc. (fittings glazing and paneling shall be paid for separately)

Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Extra for colour anodizing

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc. with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With clear float glass panes of 6.00 mm thickness

With frosted glass panes of 5.00 mm thickness

With frosted glass panes of 6.00 mm thickness

With toughened float glass panes of 5.00 mm thickness

With toughened float glass panes of 6.00 mm thickness

Providing and fixing "LUXALON" lay in false ceiling 600 x 600 mm perforated corrosion resistant Aluminium magnesium alloy metal panel fixed in 24 mm 'T' frame work of module 600 x 600 mm. Panels shall be manufactured by Hunders Douglas of size 575 mm x 575 mm with perforation of 1.50 mm dia in a 3 diagonal square pattern giving 22% perforated area of approved colour in 0.70 mm thick Aluminium alloy 3105 with square edges Tiles to be stove enamelled on a continuous application for pre-treatment. The coils to be go through 4 stages of pre treatment three times of oven baked through conversion coating, priming and finish coat ensuring superior adhesion, high corrosion resistance and good colour stability. The coils to be painted on both sides after degreasing. inside surface to have a primer of 5 microns and a coat of natural colour of 5 microns, exposed surface to have a primer of 5 microns, binder of 5 microns and a top coat of approved colour 15 microns. Grid system for fixing ceiling tiles shall comprise of tees. The 24mm main tee runners shall be suspended at an interval of 1200mm center to center. The 24nn cross tee runner shall be suspended at an interval of 600mm center to center and further supported with 24mm cross tee with inter locking arrangements to form a Grid of 600mm x 600m. The main tee shall be supported by means of 4mm G.I.rod from slab / roof. The suspension shall be provided at 1200 to 1500mm center to Centre. Provision for lights, diffusers etc. to be made including extra supports wherever necessary. A non-woven felt made of glass reinforced fiber glued oner the perforation for sound absorption Measurements shall be as per actual area of false ceiling with out deductions for lights and diffusers.

Providing and fixing FRP door shutters flush door / paneled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, AL drop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws aluminium Bow handles, 2 Nos of Aluminium 75 mm Baby latch complete all as directed at by the Project Engineer. 35 mm thick paneled door type of approved colours including the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws.

Providing and fixing anodised aluminium AL drops ISI marked of size 300 X 16 mm transparent or dyed to required colour or shade with necessary screws etc. complete as directed by the Engineer-in-charge

Providing and fixing anodised aluminium tower bolts of size 300 X 12 mm (barrel type) ISI marked of approved make transparent or dyed to required colour or shade with necessary screws etc. All as per specifications and as per drawings.

Providing and fixing aluminium handles 175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete.

Providing, painting, finishing walls with two coats of anti-algae, weather proof acrylic smooth emulsion paint of approved make with silicon additives on sand face plaster/ plain plaster & concrete surfaces of required shade over new work over a base coat of exterior cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

Providing and applying wall painting two coats on new work with premium plastic emulsion paint of approved brand to give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat. Including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and fixing Minimum 17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Jet Black colour for kitchen platforms, vanitiy counters, wash basin counters, door frames, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete at all levels

Extra for providing edge moulding to 17 mm thick marble stone / Granite Slab counters, Vanitis etc. including machine polishing to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge.

Granite work

Providing, supplying and laying pre polished granite slab flooring / dado / Wall cladding with not less than 17 mm thick granite slabs over 20 mm thick base cement mortar 1:4 (using crushed sand) laid and placed with grey cement slurry including filling the joints with matching white cement based tile grout complete all as per specifications and drawings.

Using approved shades other than black

Extra over for Providing flamed treatment/Sand blasting/river blasting of granite all complete as per the directed by the Project Engineer

Providing and fixing 40 / 42 mm thick Aluminium Flush Door Shutter consisting of 2 mm thick colour anodized Aluminium Sheets (15 micron), 37 mm wide Aluminium frame work inside filled with glass wool 50 mm thick compressed to 37 mm including all furniture fittings, 4 Nos SS Heavy duty hinges of size 125 mm with SS Screws, Godrej make 6 lever mortise lock with handles, 1 No 250 X 12 mm long Aluminium tower bolt including vision panel with glass as per drawings complete manufactured by approved manufacturer complete as per approved fabrication drawings as directed by the Engineer-in-charge

Designing and installation of pre fabricated fixed and folding type Awning - manually operated Cantilever type of approved make and shade for Protection for all outdoor areas, for protecting doorways, pathways, stairs and windows from the sun and weather and Manufactured with welded powder coated steel frames and weather resistant durable fabrics as per specifications and drawings complete as directed by the Engineer-in-charge. (For measurement purpose two feet extra in both the direction to be consider for payment purpose from actual size of awning).

Providing and fixing 12 mm thick pre-laminated particle board flat pressed 3 layer or graded wood particle board conforming to IS 12823 Grade-I, Type - II in paneling fixed in aluminium doors, windows, shutters and partition frames with C.P Brass / Stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge Prelaminated particle board with decorative lamination on both sides.

Providing and fixing double action hydraulic floor spring of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plate.

Supplying unskilled / semi skilled / Skilled man power along with necessary tools, machines etc. as and when decided by Engineer-in-charge to work for eight hours (excluding lunch Hours ) per day to carry out the departmental work allotted by Engineer-in-charge.

Un-Skilled

Semi-Skilled

Skilled

Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethylene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under relevant item)

Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs and including aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethylene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification .Note : ACMP shall be measured to the actual visible area of the ACP sheet including silicon joints as fixed on site.

Providing and fixing Aluminium Grill 10 mm thick "DECO GRILLE" make Model No. DG- 202 in natural Silver anodising of min 15 Microns with a opening size of 60mm x 45mm and Minimum weight of 4.12 Kg/ Sq.M including providing and fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge .Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg/ sq.mm.

Extra for providing Aluminium Grill 10 mm thick with colour anodised by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge

Providing and fixing hand rail using 304 grade Stainless Steel pipes of approved size and make and quality by welding, mirror / matt polishing, fixing at site etc. for balcony railing & staircases railing including special sections as per drawings, specifications. complete as directed by the Engineer-in-charge

Providing and fixing 304 grade Stainless Steel pipes of approved size and make and quality by cutting and placing in position including embedding if necessary complete as per specification and as directed by the Engineer in charge

Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters

Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters

Filling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width

Providing and fixing stainless steel (SS 304 Grade) adjustable friction windows stays of approved quality with necessary stainless steel screws to the side hung windows as per specifications and as directed by the Engineer-in-charge

Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or Calcium silicate Boards of approved make with design ceiling tiles of BWP type a coat of aluminium primer on both sides & edges, including two coats of phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of GI Coated standard Sections Tsections 35 x15x1.5 mm size main runners, cross runners 23.5x19x1.5 or with design ceiling tiles of BWP type phenol formaldehyde synthetic mm fixed to main runners placed 600 mm center to center both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm center to center including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately if provided).

Design, fabrication, supply and installation of frameless Façade using clear, toughened float glass of specified thickness for fixed glazing and operable panels (doors) with crystal edge polish and necessary patch fittings (DORMA PT range) for swing doors, hunged on floor spring, , S.S.handles and locking arrangement and clear toughened float glass fixed for fins and all joints sealed with weather silicone sealant and fixed portion glass from top sides and bottom with anodised (minimum thickness 25 microns) Aluminium 'C' channels (25 mm X 25 mm X 1.5mm thick) and all glass to glass joints sealed with clear thick weather silicone sealant and making the required grooves in plaster/concrete for fixing channels etc. and making good the same with sealant / plaster of pairs etc. complete all as per approved shop drawings, specifications and as directed by Engineer-in-charge. (Shop drawings to be prepared by the contractor as per the site conditions and the same shall be got approved by Engineer in charge before procurement.)

Frameless fixed panels using 12mm thick clear toughened float glass including making cut outs, finishing the edges sealants etc. complete. Glass area alone shall be measured and paid (necessary patch fittings shall be paid under relevant Item)

Providing and fixing C.P brass bib cock of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge

15 mm dia bib cock of approved type and make .

20 mm dia C.P brass bib cock of approved make

Providing and fixing C.P Brass open stop cock of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge

15 mm n.b CP Brass open stop cock of approved make and type

20 mm n.b CP brass open stop cock of approved make and type

Providing and fixing C.P brass Angle cock of heavy quality of specified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge

15 mm n.b CP brass Angle cock of approved make

Providing and Fixing 15 mm CP brass Angle stop cock of approved make- quarter Turn

Providing and Fixing CP brass 100 mm dia shower rose with Shower arm of Specified make as per specifications and as directed by Engineer-in-charge complete

Providing and fixing 15 mm C.P brass 2 in 1 bib cock and Angle cock combination of Heavy Quality of approved make as per specifications and as directed by the Engineer-in-charge

Providing and fixing C.P brass 2 way Angle cock (2 Angle cock combination in single fitting) of heavy quality of approved make as per specifications and as directed by the Engineer-in-charge.

Providing and fixing 15 mm C.P brass pillar cock of heavy Quality of approved make and specified type as per specifications and as directed by the Engineer-in-charge.

Providing and fixing white vitreous china European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved make, 10 liter low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge

E.W.C. pan ordinary colour range with ISI marked white solid plastic seat and lid.

Providing and fixing Indian water closet (Orissa pan) of approved make with 100 mm China ware P or S trap, One no. 10 liter High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing white vitreous china flat back half stall urinal size 580 x 380 x350 mm / 610 mm Aqua seal model of approved make with approved make 32mm C.P flush value with standard flush pipe and C.P. brass spreaders, 32mm urinal waste coupling with dome grating and clamp etc. including making G.I water line connection complete as directed by the Engineer-in-charge (Only G.I. pipes will be paid under relevant Item )

Single half stall urinal with C.P brass Flush valve. Note : For fixing flush valve 32 mm G.I water line provision to be made which will be paid under relevant Item .

Providing and fixing vitreous China wash basin of approved make and colour with C.I. brackets, 15 m C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge

White vitreous China wash basin size 630 x 450 mm and equivalent sizes with single 15 mm C.P. brass pillar tap

Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge .

Providing and fixing stainless steel toilet paper holder recessed type of approved make and type with S.S screws as directed by the Engineer-in-charge complete.

Providing and fixing 150 X150 mm soap dish of white vitreous Chinaware, of approved make including chasing walls making good the same after fixing the China Soap dish etc. complete all as per specifications and as directed by the Engineer-in-charge

Providing and fixing heavy quality C.P .brass waste coupling of following dia for wash basin and sink, of approved make, size and quality all as directed complete

C.P Brass Waste coupling 32 mm Dia of approved make Half threaded or Full threaded as per requirement.

Providing and fixing heavy quality CP brass bottle trap 31 / 32 mm of approved make single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the center of the waste coupling 77 mm breadth with 25 mm minimum water seal, of approved make for wash basins / urinal etc. all as per specifications and directed by the Engineer in charge.

Providing and fixing C.P brass towel rail of approved make 600 mm long complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in-charge.

Providing and fixing Brass 15 mm C.P presstomatic series auto shut urinal flush cock of approved make and quality

Providing and fixing 75 mm thick Non Asbestos Fiber Reinforced Aerated Cement Sandwich wall panels of bulk density of 876 kg/cum of approved manufacturers , made out of Light Weight Fiber Reinforced Aerated Cement Concrete Core Composed of Portland Cement, Fly Ash Binders Etc. and 4 to 5 mm thick Non Asbestos Fiber Cement Boards on either Side of the Core having a Tongue and Groove on Longitudinal side of the Modules . These panel Modules are Erected / Installed using Galvanised Iron Steel Tracks of suitable section as per manufacturers specification at bottom and Top of the Wall respectively Including all Necessary Material Required for Erecting and Fixing the Wall Panel Complete as per the Direction of the Engineer in Charge. For Permanent and Exterior Joints the Paste of Sodium Silicate and Fly Ash / Cement to be Applied at Tongue and Groove Interlocking Joints and on Exposed Joints with Acrylic Putty and Fiber Tape on Both Side all as per design, drg and specification and as directed by Engineer-in-Charge. (Structural steel used for support if any required shall be paid in relevant item) { Note: Necessary cut-outs for Doors & Windows shall be made in the wall paneling. The rate shall be inclusive of all materials & Labour required for making cut-outs and additional GI channel frame work. No deductions will be made for the cut-outs for measurement purpose.}

Providing structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistency with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 liters of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer) '5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used. 'Note: Scaffolding will be paid separately under relevant Item if required.

Providing and applying One Base coat of Polymer based synthetic Textured Coating / Synthetic plaster by metallic trowel having acid, alkali and fungus resistant properties of thickness approx. 2.5mm finished with minimum three coats of High Performance Acrylic coating by brush / plastic trowel in approved Shade of Dura classic range/ Dura premium range of M/s Dura Shield /Ms Renova or Sherwin Willams (BJN Paints) or approved equivalent like Square or rough stone shade/finishes as approved by Architect etc. as per manufacturer's specifications and recommendations as per approved pattern provided with grooves, offsets, preparing the surfaces, final rendering and correct to lines, level and plumb, curing etc. complete at all heights including cost of all materials, labour, double tubular scaffolding and as directed by the Project Engineer. Note:- The Textured Coating is to be GUARANTEED for bone dry condition, acid, alkali and fungus resistant properties for a period of seven years. Patterns, shades approved by the Architect

Providing, laying , jointing, fixing and testing heavy quality ( (ISI Marked C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples, reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydraulic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bit mastic paint, all as directed by the Engineer-in-charge. Pipes with ISI marked 'C' -Class heavy quality pipes of approved make or approved equivalent quality or product meeting technical parameter.

15 mm dia G.I pipe

20 mm dia G.I pipe

32 mm dia G.I pipe

Providing, supplying, fixing in position, under floors or in walls centrifugally cast iron pipes including required specials like bends, tees, 'Y' collars, cowl etc. for soil, waste and ventilation pipes conforming to IS.3989 of approved make including cost of jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site.

75 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 0.90 kg lead / joint

100 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 1.00 kg lead / joint

Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating , complete all as specifications and drawings and as directed by the Engineer-in-charge