SITC of Audio Visual System in Mehta Sabhagar (Auditorium Hall) HCM RIPA, Jaipur.

Amount

Supply installation testing and Commissioning of Grid mount photo isolator DMX Amplifier unit 1 DMX input and 8 isolated output with following specifications: • Power Supply: 90-240V AC, 45-63Hz. • Control: DMX 512 protocol, • Control Signal input: 5 pin XLR female, • Size:less than equal to 482 x 44 x 128mm , • Weight:less than equal to 2Kg .with splitter bracket. etc. complete in all respect as per pre approved of Engineer in charge.

Supply, Installation, Testing and Commissioning of Handheld Wireless Mic with Cardiod polar pattern for transmitter,Dynamic microphone with Neodymium magnet , Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity less than 1.0 µV,Receiver Image rejection greater than 55dB,Receiver Dyanmic range greater than 95dB and receiver having 32 channels possible,Receiver S/N ratio greater than 100dB A,distortion less than 1 percentage, Transmitter sensitivity - 3.2 mV/Pa,modulation:plus/minus 40kHz etc. complete in all respect as per pre approved of Engineer in charge.

Supply, Installation, Testing and Commissioning of 24 Channel Mixer with 16 mono Mic/Line Input and 4 stereo/line Inputs ; 6 AUX Sends plus 2 FX Sends ; 2 Matrix Out ; 1 mono Out ; 4 GROUP Buses plus ST Bus ; On Board Processor : REV-X 8 PROGRAM, PARAMETER control , SPX 16 PROGRAM, PARAMETER control ; 48V phantom power per channel ; Reording and Playback via USB Device, Digital Connectivity for iPod / iPhone ; THD less than 0.02percentage ; Frequency Response : 20Hz - 20kHz ; Crosstalk : -74dB at the rate 1kHz complete with standard accessories etc. complete in all respect as per pre approved of Engineer in charge.

Supply and connect CEE to CEE Y Chord 3Mtr / 5 Mtrs etc. complete . all as per pre approved of Engineer in charge. For additional technical parameters of products / work refer Annexure "A" attached with PWD Electric BSR 2022.

Supply and Laying Screened DMX signal cable for DMX network etc. complete . all as per pre approved of Engineer in charge. For additional technical parameters of products / work refer Annexure "A" attached with PWD Electric BSR 2022.

Supply installation testing and Commissioning of Digital Lighting Console with 1024 DMX channels, 1024 Channels, 96 Fixtures, 96 Dimmer Control Channels, Time control of scenes: Fade in/out, LTP slope, Channels for each fixture 40 primary + 40 fine tune, LCD display with back light, 600 Scene step, 60 Scenes/Playbacks, 10 Scenes to run simultaneoulsy, Shape generato: Shapes of Dimmer, Pan/Tilt, RGB, CMY, Color, Gobo, Iris and Focus, Master slider - Global, playback, fixture, USB Memory - FAT32 supported etc. complete .all as per pre approved of Engineer in charge. For additional technical parameters of products / work refer Annexure "A" attached with PWD Electric BSR 2022.

Supply installation testing and Commissioning of Grid mount 4 channel (4chx2.5KW) Dimmer pack with following features and Specifications • Two AC inputs, each input offers 15A output for channel 1 and 2 or channel 3 and 4 • Each channel is able to configured as dimming or switching mode • Equipped with clamp for truss handing or table top operation Specifications : • Power Input: AC 100 - 240V, 45-63Hz • Output: 10A per channel (max), total 15A × 2 • Protocol: DMX-512 etc. complete . all as per pre approved of Engineer in charge. For additional technical parameters of products / work refer Annexure "A" attached with PWD Electric BSR 2022.

Supply installation testing and Commissioning of Well designed 18 Way Direct Lighting Distribution Board made up of CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt texture finish consists of R, Y, B Indicator lamp, suitable rating TPN incomer, SP Mcbs and for the junction boxes fixed on the top of the light bar including wiring and busbar connection with proper earthing and Hingable door with magnetic door lock complete etc. all as per pre approved of Engineer in charge. For additional technical parameters of products / work refer Annexure "A" attached with PWD Electric BSR 2022.

Supply installation testing and Commissioning of MS Auxilary fabricated marshalling boxes made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish for all the light bar with required no of ivory connectors. etc . all as per pre approved of Engineer in charge. For additional technical parameters of products / work refer Annexure "A" attached with PWD Electric BSR 2022.

Supply installation testing and Commissioning of DMX lighting junction loop box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 5 pin XLR DMX in / out connector of below specifications:- • Extra high temperature resistant insulator material. • All metal housing offers best overall RF protection and electromagnetic shielding • New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination • Optional connection to easily join pin 1 to chassis ground etc .all as per pre approved of Engineer in charge. For additional technical parameters of products / work refer Annexure "A" attached with PWD Electric BSR 2022.

Supply Installation Testing and Commissioning of 750W Stage Profile Spot Light used as a spot light, high-contrast gobo projection light powder coated diecast body with below specification. • Lamp : 750W HPL • Lamp Socket - Base G9.5 • Power supply:AC 230 V, 50 Hz • Beam spread : 19° / 26° / 36° (Optional) • 6432 lux at 5mtr • Dichroic reflector, • G9.5 lamp base • 4 plane shaping shutters • Normal yoke with adjustable keys for tilt rotation • Fine adjustment in lamp focus position for adjustment,making duly connection etc. complete in all as per pre approved of Engineer in charge. For additional technical parameters of products / work refer Annexure "A" attached with PWD Electric BSR 2022.

Supply Installation Testing and Commissioning of 1000W Halogen Theater Spot light with 150mm diameter plano covnvex lens and technical specifications as below. • Lamp - 1000W 230V single ended lamp, Lamp Socket - Gx9.5 • Power supply - 230/240V AC • Power cable - 3 core 2.5 sq. mm. copper PVC insulated • Beam angle - 40° • Housing - MS fabricated construction with black epoxy polyester powder coated. • Reflector - Aluminium reflector, sand blast anodised finished. • Protection rating - IP20, • Lens - 6" diameter, complete with required connection etc. complete all as per pre approved by Engineer in charge. For additional technical parameters of products / work refer Annexure "A" attached with PWD Electric BSR 2022.

Supply Installation Testing and Commissioning of High quality LED 4x100W blinder matrix Light is used in Entertainment applications, Stage performance , fixture with advanced COB LED technology with below specifications:- • Power Consumption: 200W • Power Supply: 100-240 AC, 50-60Hz • Light Color: RGBW • LEDs Qty : 4 pieces • Channel: 8/9 channel • Lifetime: Over 50,000 hours • Beam Angle: 30° • Control mode: DMX512, Manual control. • Dimmer: 0~100% linearly adjustable • LUX: 3960 LUX @ 2m • IP Grade: IP20, complete with required connection Certification: CE etc. complete .all as per pre approved by Engineer in charge. For additional technical parameters of products / work refer Annexure "A" attached with PWD Electric BSR 2022.

Supply Installation Testing and Commissioning of High quality 54x3W LED PAR Light used as a Effect Light, Spot Light and Strobe Light etc. with below specifications: • Lamp: 54 X 3W RGBW LED (12R+18G+18B+6W) • Max. Power consumpsion: 160W • Power supply: 100-230V AC, 50/60Hz • Power cable: 3 core 2.5 sq. mm. copper PVC insulated • Channels: 8 DMX-512 • DMX : 5 Pin • Beam angle: 25° • Control mode: DMX,Manual and Master Slave • LUX @ 2m: 10,000 • Dimming: 0 - 100% • Function: strobe, dimming, sound active and Master slave. • Housing: Diecast aluminium with black epoxy polyster powder coated • Power and DMX: Loop in and loop out • Certification: CE, complete with required connection etc as required etc. all as per pre approved by Engineer in charge. For additional technical parameters of products / work refer Annexure "A" attached with PWD Electric BSR 2022.

Supply and Laying of 2 Core Shielded Cable for connectings Microphones with related conduits / fittings / termination, making duly connection etc. all as per pre approved by Engineer in charge. For additional technical parameters of products / work refer Annexure "A" attached with PWD Electric BSR 2022.

Supply and Fixing of XLR Connectors (for connecting speakers and mikes with amplifier) etc. complete. all as per pre approved by Engineer in charge. For additional technical parameters of products / work refer Annexure "A" attached with PWD Electric BSR 2022.

Supply installation testing and Commissioning of of 12" two-way , self powered Active speakere having frequency range 58 Hz -18 kHzz , maximum calculated SPL 125 db or above, coverage angle (HxV) 90x50 with , output 1000W. the loudspeaker should have monitor angle on enclosure for use as stage monitor etc complete in all respect. For additional technical parameters of products/work refer Annexure "A" attached with PWD Electric BSR 2022.