Construction of Processing Shed 531.65 Sq.M. and Cleaning and Grading Building 232.19 Sq.M.

Amount

Excavation in soil plus soft murum with all leads and lifts, with backfilling the trenches and dewatering complete.(Mannually)

Excavation in Hard murum with all leads, lifts including backfilling the trenches and dewatering complete.

Excavation in Hard murum and Boulders with all leads and lifts including backfilling the trenchesand dewatering complete.( Mechanical means)

Excavation in Soft Rock with all leads and lifts, backfilling the trenches and dewatering complete.(Mechanical means)

Excavation in Hard Rock with pnuematic breaker, all leads and lifts, backfilling the trenches and dewatering complete.(Mechanical means)

providing anti-termite treatment to trenches with 5 liters per Sq.M. area by 1liter Chlorophyrifos plus+19 liters of water i.e. 20% Emulsionas, per specifications and dose directed by Engineer-in- Charge, complete.

Bottom surface of trench

Backfilling of Trenches

Plinth and Appron

Providing ,laying, PCC M-10 Grade, including formwork, compaction , curing with all leads and lifts complete as per specifications.

Providing RCC 1:1.5:3 for footing including, formwork, compaction by virator, curing etc. with all leads and lifts , testing, complete as per specifications.

Providing RCC 1:1.5:3 for Column in Substructure including, formwork, compaction by virator, curing, testing etc. with all leads and lifts , complete as per specifications.

Providing RCC 1:1.5:3 for Beam in Substructure including, formwork, compaction by virator, curing , testingetc. with all leads and lifts , complete as per specifications.

Providing UCR Stone in Cement Mortar 1:6 in Substructure with scaffolding, curing , testing all teads and lift complete as per specifications.

Cement Plaster 12 mm thick in single coat in Cement Mortar 1:5 to inside of walls with scaffolding ,curing complete as per specifications.

Waterproof sand faced Cement Plaster externally in C.M.1:4 using approved screened sand in all positions including base coat 0f 15 mm thick,in C.M. 1:4,using Waterproof Compound at 1 kg per cement bag, curing the same for not less than two days and keeping the surface of the base coat rough to receive sand face treatment 6 to 8 mm thick in C.M.1:4 finishing the surface by taking out grains and curing for 14 days scaffolding etc complete.

Providing White lime wash in two coats to internal wall of Warehouse, scaffolding etc complete as per specifications.

Providing Colour wash in two coats to External wall of Warehouse, scaffolding etc, complete as per specifications.

Providing Steel Ventilators as per drawing , scaffolding etc complete as per specifications.

Providing Mild Steel Rolling Shutters as per drawing , scaffolding etc complete as per specifications.

Providing Synthetic Enamel painting in three Coats to Steel Ventilators and Rolling Shutters.

Providing Hard Murum in plinth with approved material obtained from contractors sourse with all leads and lifts , laying layers of 20 to 30 cm; breaking clods to the required lines, grades, and curves and section,watering compaction not less than 97% of Standard Proctor Density etc. complete

Providing ,laying PCC M 15 on top of Appron compaction, curing , testing complete as per specifications.

Providing Size metal layer , complete as per specifications and as directed by Engineer-in-Charge..

Providing and spreadingsoft murum blindage over appron and size metal layer in plinth, watering, compaction by plate vibrator/ 10 T Roller, complete as per specifications.

Providing watering, compaction by plate vibrator over appron size metal layer complete as per specifications.

Providing Cement plaster 12 mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surface inall positions, including curing , scaffolding complete as per specifications and as directed by Engineer-in-Charge.

Providing fine cement finish 1.50 mm thick over green plaster surface including scaffolding curing etc, complete

Providing Compacted 200 mm thick 65% Oversizeplus 35% Size metal layer in the plinth of Warehouse building ,spreading, watering ,compaction by 10 T roller, including soft murum as blindage complete as per specifications

Providing PCC 1:1.5:3 , 200 mm thick Trimix Concrete layer in the plinth floor of Warehouse building, M.S. Channel form work, skid vibrator, vacuum dewatering, trovelling with machine, rough finish, groove cutting for construction and expansion joint filling the groove with Thermocol and polysulphide sealent, arranging 3 phase electic supply for the work, complete as per specifications and as directed.

Proving and fixing M.S. Sill Angle of size 50x50 6mm at Rolling Shutter Door inclung hold fast, line level complete as per specifications.

M.S.TMT Fe-500 Grade Bar Reinforcement conforming to IS:226 and IS:2062, including cutting, bending, binding with M.S. G.I. wires, placing in position , testing complete as per specifications and as directed.

Providing Mild Steel IN TRUSSES,other similar trussed purlins,members with all bracings,gusset plates conforming to IS:226 and IS:2062 , nuts and bolts with fabrication ,erection, scaffolding , Cleaning, applying, Red Oxide primer one coat and oil paing in two coats, testing, with all leads and lifts complete as per specifications and as diredted.

Providing, ISMC 150X75 MM, fabricating, fixing inpostion with holdfast, one coat of red oxide primer and two coats of oil paint, etc complete as per specification complete as directed.

Providing Country Cut Teak Wood Frame of 125x65 mm size frame with/ without ventilator of size specified for doors including champhering , rounding rebating, fixing iron holdfast of size 300x40x5 mm, one coat of primer and two coats of oil paint, complete as per specification and as directed by Engineer-in-Charge.

Providing and fixing solid core flush door shutter in single leaf 32 mm thick without ventilators, commercial type of exterior grade as per detailed drawing, with wrought iron holdfast , stainless steel fixtures and fastenings, one coat of primer and two coats of oil paint, complete as directed

Providing and fixing in position (as perIS:1868/1988), the sliding window of two track with rectangular pipe having overall dimension 63.50x 38.1x1.02 mm at weight 0.547 Kg/R.M. and window frame track section 40x18x1.25 mm at weight 0.417 Kg/ R.M. as per detailed drawing and as directed by E ngineer-in-Charge with all necessary fixtures and fastenings such as roller bearings in nylon casing ans self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete.

Providing and fixing in position 11.35 M height lightening arrester as per drawing , design, specification complete as directed by Engineer-in-Charge.

Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter- to-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 600 mm girth (Surface Width).

Providing and fixing Turbo ventilators 600 mm diameter of wind operated turbo ventilator system of various sizes over the existing roof including cutting Zincaluminium sheets, proper fixing in position to true line and level with all fixtures and fasteinings including etc. complete

Shed Elelctrification

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable up to and including 16 sq. mm complete as per specification no. CW-EXNCTR

Making trench of suitable width and depth in soft soil for laying provided LT cable up to and including 16 sq.mm complete as per specification no. CW-EXN-CTR

Supplying & erecting mains PVC unarmoured cable 1100Volt grade ISI mark 3 core / 2.5 sqmm stranded / solid copper complete erected on wall with duly painted G. I. Saddle @ 0.25 m C/C & rigidly grouted in the wall with the help of plated screws.

Supplying & erecting weatherproof powder coated distribution board 4 way with 2 x 6/10 Amp S. P. M. C. B. with industrial two pin plug socket 10 A and 3 pin plug top 10 A with top cover necessary connection etc complete with approved make.

Providing point wiring for street light with PVC unarmoured cable 1100Volt grade ISI mark 3 core 1.5 sqmm stranded / solid copper erected on wall with G. I. Saddle duly painted @ 0,25 m C/C rigidly grouted in the wall with the help of plated screw including 4” x 4” M. S. box 2 way with epoxy painting & inside 10 amp Nylon connector strip for street light connection and flexible cable of 2 mtrs. for street light connection etc. complete as directed by Engineer in charge.

Supplying and erecting integrated LED street light fitting 40 to 50 W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FGODF / FLS2. (to be fixed at 5 mt level from appron top)

Supplying and erecting street light Wall bracket made from 25 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE

Supplying & erecting G.I. pipe ‘A’ class 75 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE.

Supplying & erecting 18 guage M.S. Box powder coated (4"x4") 3 way for mains connection.

Supplying shockproof type hand lamp with lamp holder, bulb/ lamp 100 W guarded glass and 30 mtr. 3 core PVC flexible cord with hand shield type 3 pin 6 Amp. Plug top.

Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.

Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW

Wiring for plug on board with flush Switch socket, copper wiring and earthing as per specification No:WG-PW/SW

Supplying & erecting mains with 2 x 2.5 Sq.mm stranded copper PVC insulated wire with 2 x 1.5 Sq.mm copper PVC wire in PVC casing - caping 20 mm on wall / ceiling.

Supplying & erecting main with 2 x 4.00 Sq.mm stranded copper PVC insulated wire with 2 x 1.5 Sq.mm copper PVC wire in PVC casing - caping on wall / ceiling.

Supplying and erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted suitable for SPMCB of 12 ways on iron / GI frame (horizontal busbar type) with TPNMCB 40 to 63 A -01 No. (Incomer) & SPMCB 6 to 32A - 12 Nos. as per specification no. SW-SWR/MCBDB

Supplying and erecting GI sheet 1.6 mm (16 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

Supplying and erecting marine plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete.

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP

Shed Royalty

Murum

Metel

Rubbal

Shed Testing

Cement Fineness, Consistancy, Setting Time, Compressive Strength, Specifuc Gravity.

Cement Concrete M-20 Compressive Cube Strength

Sand Fineness, Modulus, Silt Content

Murum Gradation

Mild Steel Utimate Tensile Test, Wt/M.

Srructural steel

Warehouse

Excavation in soil plus soft murum with all leads and lifts, with backfilling the trenches and dewatering complete.(Mannually)

Excavation in Hard murum with all leads, lifts including backfilling the trenches and dewatering complete.

Excavation in Hard murum and Boulders with all leads and lifts including backfilling the trenchesand dewatering complete.( Mechanical means)

Excavation in Soft Rock with all leads and lifts, backfilling the trenches and dewatering complete.(Mechanical means)

Excavation in Hard Rock with pnuematic breaker, all leads and lifts, backfilling the trenches and dewatering complete.(Mechanical means)

providing anti-termite treatment to trenches with 5 liters per Sq.M. area by 1liter Chlorophyrifos plus+19 liters of water i.e. 20% Emulsionas, per specifications and dose directed by Engineer-in- Charge, complete.

Bottom surface of trench

Backfilling of Trenches

Plinth and Appron

Providing ,laying, PCC M-10 Grade, including formwork, compaction , curing with all leads and lifts complete as per specifications.

Providing RCC 1:1.5:3 for footing including, formwork, compaction by virator, curing etc. with all leads and lifts , testing, complete as per specifications.

Providing RCC 1:1.5:3 for Column in Substructure including, formwork, compaction by virator, curing, testing etc. with all leads and lifts , complete as per specifications.

Providing RCC 1:1.5:3 for Beam in Substructure including, formwork, compaction by virator, curing , testingetc. with all leads and lifts , complete as per specifications.

Providing RCC 1:1.5:3 for Beam in Superstructure including, formwork, compaction by virator, curing, testing etc. with all leads and lifts , complete as per specifications.

Providing UCR Stone in Cement Mortar 1:6 in Substructure with scaffolding, curing , testing all teads and lift complete as per specifications.

Providing BBM in Cement Mortar 1:6 in Superstructure with scaffolding, curing , testing all teads and lift complete as per specifications.

Cement Plaster 12 mm thick in single coat in Cement Mortar 1:5 to inside of walls with scaffolding ,curing complete as per specifications.

Waterproof sand faced Cement Plaster externally in C.M.1:4 using approved screened sand in all positions including base coat 0f 15 mm thick,in C.M. 1:4,using Waterproof Compound at 1 kg per cement bag, curing the same for not less than two days and keeping the surface of the base coat rough to receive sand face treatment 6 to 8 mm thick in C.M.1:4 finishing the surface by taking out grains and curing for 14 days scaffolding etc complete.

Providing White lime wash in two coats to internal wall of Warehouse, scaffolding etc complete as per specifications.

Providing Colour wash in two coats to External wall of Warehouse, scaffolding etc, complete as per specifications.

Providing Mild Steel Rolling Shutters as per drawing , scaffolding etc complete as per specifications.

Providing Synthetic Enamel painting in three Coats to Steel Ventilators and Rolling Shutters.

Providing Hard Murum in plinth with approved material obtained from contractors sourse with all leads and lifts , laying layers of 20 to 30 cm; breaking clods to the required lines, grades, and curves and section,watering compaction not less than 97% of Standard Proctor Density etc. complete

Providing and spreadingsoft murum blindage over appron and size metal layer in plinth, watering, compaction by plate vibrator/ 10 T Roller, complete as per specifications.

Providing watering, compaction by plate vibrator over appron size metal layer complete as per specifications.

Providing Cement plaster 12 mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surface inall positions, including curing , scaffolding complete as per specifications and as directed by Engineer-in-Charge.

Providing fine cement finish 1.50 mm thick over green plaster surface including scaffolding curing etc, complete

Providing Compacted 200 mm thick 65% Oversizeplus 35% Size metal layer in the plinth of Warehouse building ,spreading, watering ,compaction by 10 T roller, including soft murum as blindage complete as per specifications

Providing PCC 1:1.5:3 , 200 mm thick Trimix Concrete layer in the plinth floor of Warehouse building, M.S. Channel form work, skid vibrator, vacuum dewatering, trovelling with machine, rough finish, groove cutting for construction and expansion joint filling the groove with Thermocol and polysulphide sealent, arranging 3 phase electic supply for the work, complete as per specifications and as directed.

Proving and fixing M.S. Sill Angle of size 50x50 6mm at Rolling Shutter Door inclung hold fast, line level complete as per specifications.

M.S.TMT Fe-500 Grade Bar Reinforcement conforming to IS:226 and IS:2062, including cutting, bending, binding with M.S. G.I. wires, placing in position , testing complete as per specifications and as directed.

Providing Mild Steel IN TRUSSES,other similar trussed purlins,members with all bracings,gusset plates conforming to IS:226 and IS:2062 , nuts and bolts with fabrication ,erection, scaffolding , Cleaning, applying, Red Oxide primer one coat and oil paing in two coats, testing, with all leads and lifts complete as per specifications and as diredted.

Providing, ISMC 150X75 MM, fabricating, fixing inpostion with holdfast, one coat of red oxide primer and two coats of oil paint, etc complete as per specification complete as directed.

Providing , fabricating, fixing in position M.S. Ladder as per drawing and design, one coat of red oxide primer and two coats of oil paint complete as per specificationsand as directed by the Engineer-in-Charge.

Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter- to-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 600 mm girth (Surface Width).

Warehouse Royalty

Murum

Metal

Warehouse Testing

Cement Fineness, Consistancy, Setting Time, Compressive Strength, Specifuc Gravity.

Cement Concrete M-20 Compressive Cube Strength

Bricks Water Absorption(Set of 5No.)

Murum Gradation

Mild Steel Utimate Tensile Test, Wt/M.

Warehouse Electricity

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable up to and including 16 sq. mm complete as per specification no. CW-EXNCTR

Making trench of suitable width and depth in soft soil for laying provided LT cable up to and including 16 sq.mm complete as per specification no. CW-EXN-CTR

Supplying & erecting mains PVC unarmoured cable 1100Volt grade ISI mark 3 core / 2.5 sqmm stranded / solid copper complete erected on wall with duly painted G. I. Saddle @ 0.25 m C/C & rigidly grouted in the wall with the help of plated screws.

Supplying & erecting weatherproof powder coated distribution board 4 way with 2 x 6/10 Amp S. P. M. C. B. with industrial two pin plug socket 10 A and 3 pin plug top 10 A with top cover necessary connection etc complete with approved make.

Providing point wiring for street light with PVC unarmoured cable 1100Volt grade ISI mark 3 core 1.5 sqmm stranded / solid copper erected on wall with G. I. Saddle duly painted @ 0,25 m C/C rigidly grouted in the wall with the help of plated screw including 4” x 4” M. S. box 2 way with epoxy painting & inside 10 amp Nylon connector strip for street light connection and flexible cable of 2 mtrs. for street light connection etc. complete as directed by Engineer in charge.

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE

Supplying & erecting G.I. pipe ‘A’ class 75 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE.

Supplying & erecting 18 guage M.S. Box powder coated (4"x4") 3 way for mains connection.

Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.

Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW

Wiring for plug on board with flush Switch socket, copper wiring and earthing as per specification No:WG-PW/SW

Supplying & erecting mains with 2 x 2.5 Sq.mm stranded copper PVC insulated wire with 2 x 1.5 Sq.mm copper PVC wire in PVC casing - caping 20 mm on wall / ceiling.

Supplying & erecting main with 2 x 4.00 Sq.mm stranded copper PVC insulated wire with 2 x 1.5 Sq.mm copper PVC wire in PVC casing - caping on wall / ceiling.

Supplying and erecting GI sheet 1.6 mm (16 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

Supplying and erecting marine plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete.

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP

Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Social, Health and Safety (ESHS) risks and ESHS Code of Conduct

M/s. Sib(India) constructions

ABHISHEK BALASAHEB KHURUD

ANIL BHIMASHANKR HASBE