REPAIRS TO WALL, DRAINS, FOOTPATH, HARDSTANDING, FENCING, PLUMBING , SANITARY FITTINGS AND CERTAIN OTHER MISC NATURE OF WORK AT SITE P UNDER GE(AF)THANE

S&F in Repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails stringing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. all as directed (Note-:Each line wire to be measured)

S&F in repair, concertina coil fencing with punched tape concertina coil 1050 mm dia 6-7 metre openable length, having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (Note: cost of M.S. angle, shall be paid separately under relevant item of Sch A)

S&F in repair, concertina coil fencing with punched tape concertina coil 600 mm dia 6-7 metre openable length, having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (Note: cost of M.S. angle, shall be paid separately under relevant item of Sch A)

Restraining and resecuring including making good staples etc. of exiting galvanised barbed wire and fixing to any type of standard rails straining bolt including securing or tying at crossing with and provision of galvanised M.S wire stapes or steel pins, etc or direct (each line wire to be measured) complete all as specified and directed by Engr in Charge.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins,arches,pillars etc, complete all as specified and directed.

M&L for Precast cement concrete Block (1:3:6), type C1 (using 20mm graded stone aggregate) straight or curved on plan exc 6 mtr mean radius, exc 10 cm width and set in CM (1:6) all as specified and as directed by Engr-in-Charge.

M&L for walling of random rubble, brought upto courses, built in CM 1:6 complete all as specified and directed by Engr in Charge.

All as per item No 7 above but except stones.

Racking out joints/ pointing to random rubble or polygonal rubble uncoused brought up to courses complete all as specified and directed by Engr in Charge.

M&L for raised pointing to random or polygonal rubble, uncoursed or brought up to courses in CM 1:4 etc. complete all as specified and directed by Engr in Charge.