Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | single₹1.9 LAccepted-Finance | ₹1.9 L | single | Accepted-Finance Found in order |
| 2 | Not Admitted-Fee/PreQual/Technical/Finance | - | - | Not Admitted-Fee/PreQual/Technical/Finance Others-As per Tender conditions, Financial instruments and eligibility documents not submitted. |
| Sl No | Description | Qty | Unit | J D CONSTRUCTION L1 |
|---|---|---|---|---|
| 1.00 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
a)All kinds of soil | 2 | Cum | 900 ₹1,800 Lowest |
| 2.00 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. | 100 | Sqm | 50 ₹5,000 Lowest |
| 3.00 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) | 4,500 | Ltr | 1.5 ₹6,750 Lowest |
| 4.00 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion
a)Single socketed pipes 110mm diameter | 18 | Mtr | 515 ₹9,270 Lowest |
| 5.00Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. | ||||
| 5.01 | Single tee with door :110x110x110 mm | 4 | Nos. | 315 ₹1,260 Lowest |
| 5.02 | Bend 87.5° : 110 mm bend | 4 | Nos. | 200 ₹800 Lowest |
| 6.00 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
(a) 10 litre capacity - White | 2 | No. | 2,100 ₹4,200 Lowest |
| 7.00 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
a) Semi rigid pipe 32mm dia | 6 | Nos. | 175 ₹1,050 Lowest |
| 8.00 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. | 1 | No. | 4,800 ₹4,800 Lowest |
Tender Value
₹1.9 L
EMD Value
₹3,810
Closing Date
6 Aug 2025, 6:00 pmClosed
EE Civil, BSNL
Telephone Bhawan-2nd Floor, Sri Vijayapuram
Replacement of damaged GI pipes, Water Supply and sanitary fittings to Type-II B block Staff Quarters , in New Block, Shadipur, Port Blair
2025_BSNL_243121_1
18/NIT/CD-PB/AN/2025-26
Open Tender
Civil Works
Item Rate
30 days
Sri vijayapuram
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Accounts Officer (Cash), BSNL
₹3,810
13 Aug 2025
30 Jul 2025
11 Aug 2025
30 Jul 2025
6 Aug 2025
30 Jul 2025
30 Jul 2025 - 6 Aug 2025
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a)All kinds of soil
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared.
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion a)Single socketed pipes 110mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.
Single tee with door :110x110x110 mm
Bend 87.5° : 110 mm bend
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. (a) 10 litre capacity - White
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. a) Semi rigid pipe 32mm dia
Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock.
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : a)Rectangular shape 453x357 mm
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall
20 mm nominal outer dia. Pipes.
25 mm nominal outer dia. Pipes.
50 mm nominal outer dia. Pipes.
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. a)25mm nominal bore. Weighing not less than 62 gms.
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : a) 50 to 80 mm nominal bore
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. a) 15 mm nominal bore with 45 cm length.
Providing and fixing PTMT bib cock of approved quality and colour. (a)15mm nominal bore, 86 mm long. Weighing not less than 88 gms.
Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms.
Providing and fixing PTMT pillar cock of approved quality and colour . a)15mm nominal bore, 107 mm long. Weighing not less than 110 gms.
Providing&Fixing PVC cover of approved quality with locking arrangement to PVC over head tank as per direction of the Engineer-in-charge
Providing and fixing CPVC ball valve of approved quality as per direction of the Engineer-in-charge. a)25mm nominal bore
Credit for available dimantled unserviciable materials to agency a)Old rusted MS/GI pipes, sheet, angle, flat, Tee and the like
Taking out existing wooden door/window shutter, repair by cutting to required size and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.(New members fixed if any, shall be paid extra).
Easing and adjusting shutters of doors and windows for free movement including oiling, chiseling etc all complete.
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_277614.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .