REPAIR OF PATH, HARD STANDING, DRAIN AND CULVERTS INCLUDING REPAIR TO SECURITY FENCING, BOUNDARY WALL AND CLEANING MAINTENANCE OF SEWAGE LINES MANHOLES SEPTIC TANK INCLUDING SANITARY FITTINGS AND OTHER CONNECTED WORKS AND PETTY REPAIRS OF B/R WORKS

Amount

Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/ slabs/blankets, any thickness, includinguding cover fillets all as specified and directed.

M&L for 6 mm thick plywood, grade BWR, type BB, fixed with nails, fixed in repairs

M&L for Providing & fixing false ceiling at all height with GRG (Glass Fibre reinforced Gypsum) false ceiling tile of size 595x595mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99%,NRCO.50 to 0.75 as per IS 8225:1987, non combustible as per BS 476(Part4)-1970 and light reflectance of 85% (minimium) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dripped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per Sqm including both sides) comprising of main T-runner of size 15x32mm of length 1200mm and sectinally intermediate cross T of size 15x32mm of length 600mm to form grid module of size 600mmx600mm, suspended from ceiling using galvanised mild steel items (galvanised @80 grams per Sqm) i.e. 50mm long,8mm outer diameter M-6 dash fastners 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per direction of the Engineer in Charge

Dismantling of floor,hearth or wall tiling includinguding cement mortar bedding but not backing and rubbish off the premises.

M&L for Non skid ceramic jointless coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exc 0.09 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white as coloured cement to match over and including 15mm thick screed bed in cement mortor (1:6) complete all as specified and directed.

M&L for Non skid ceramic jointless coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white as coloured cement to match over and including 15mm thick screed bed in cement mortor (1:6) complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces of size 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortor (1:4) on vertical surface as in backing coat all as specified and directed.

M&L vitrified ceramic tiles 10mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid in floors set and jointed as per manufacturer's instructions Over & including screed bed or bedding layer 15mm thick in CM (1:6) complete.

All as per Item No- 08 above but skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Taking down chowkhats or frames n. exc 1.5 sqm each (without taking off shutter from the frame) complete.

Taking down chowkhats or frames exc. 1.5 Sqm but not exceeding 4 Sqm each complete.

S&F Aluminium window (Powder coated ) double leaf /three leaf with anodized aluminium frame sliding/openable including wheel powder coated of section 62.5x37x2.5 mm thick shutter with bottom & middle rail of section 112.5x37x2.5mm and style & top rail of section 83x37x2.5mm thick with centrally locking arrangement with lock rail of rebate including joints cleat fixing of builders hardware fittings necessary and gazing with 5mm thick ordinary plain glass including wire mesh shutter necessary fittings fixuters & aluminium snap beads complete.

S&F power coated anodised aluminium doors (sliding/ hanging type) with frame size 101.60 x 44.45 x 2.00 mm thick and shutter aluminium anodised and top rail 47.62 x 44.45 x 1.50 mm style 47.5 x 44.5x1.5mm, lock rail 83.50 x 44.45 x 1.50 mm and bottom rail 150.00 x 44.50 x 2.50 mm including necessary aluminium fittings like aluminium butt hinges 04 Nos, aluminium handle 150mm 02 Nos, aluminium tower bolts 200 mm 01 No, aluminium door stopper 01 Nos, jointing cleats glazing cleats, rubber packing, anodised aluminium shape beading screws etc with panelling in two parts with 12mm thick prelaminted particle board in lower panel and 5mm thick tinted glass in upper panels including all fittings & fixture complete all as specified and directed.

S & F powder coating anodised alumium partition wall with frames size 101.60x44.45x2.0mm thick and shutter alumium anodised and top rail 47.62x44.45x1.50mm and style 47.5x44.5x1.5mm, lock rail 83.5x44.45x1.50mm and bottom rail 150x44.50x2.50mm with aluminium composite panel of 3mm thick including necessary fitting and fixture complete all as specified and directed.

S & F mild steel framed work such as door frame, grills, grating hold fast etc. with ends of bar shoulder and/or riveted, or forged into spikes, framed guard bar including necessary welding, drilling hole complete.

S&F flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides of thickness 30 mm complete all as specified and as directed.

S & F 35mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F in repair solid PVC door frame of size 50x47mm made out of 5mm PVC sheet reinforced with MS square tube all as specified and directed including making good to the surfaces.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required & directed by the Engr-in-Charge.

Supply & fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire stapples complete all as specified and directed

M & L for 105X60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

M & L for 125X60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S&F 100mm butt hinges, medium wieght, cold rolled mild steel complete

S&F 100mm Aluminum hinges, complete type B-21

S & F 200 mm long aluminium anodised barrel tower bolts ISI marked of extruded section and fixed

S & F 150 mm size aluminium handles 'D' Type ISI brand cast type, anodised complete.

S & F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.

M & L applying two coats of synthetic enamel paint on new or old wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete.

M & L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete.

M & L for PCC 1:3:6 type C-0 using 12.5 mm granted stone aggregate as hold fast/filling in pressed steel frame

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.

S&F in repair 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm each pane complete all as specified and as directed.

S&F in repair 5 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm each pane complete all as specified and as directed.

S&F in repair Door closer, hydraulically regulated, designation No 3 universal type, suitable for door shutter of 851 to 1000mm in width and of wight between 61 to 80Kg and fixed, aluminium (die cast) body, all as specified and as directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed as in repairs all as specified and as directed.

Repair anodised aluminium doors (sliding/ hanging type) , butt hinge handle, jointing cleats glazing cleats, rubber packing, anodised aluminium shape beading screws etc all as specified and directed.

S&F in Repair venation blind vertical type level or ultima 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement fixed to wall completed all as specified & directed.

S&F in repair Aluminium anodised barrel tower bolts of extruded section of length of bolt 200mm all as specified and as directed.

S&F Aluminium handles, cast type, anodised of size 100mm all as specified and as directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.

M&L for Brick work with subclass "B" bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 of using class designation 100 of bricks in lieu of 75all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceiling complete all as specified and directed

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for Preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer including balance area complete removal.

M&L for Preparation of new plastered surface of ceiling and applying three coats of white wash.

M&L for Preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer birla white care Putty on wall obtain smooth finish etc including balance area complete removal.

M & L for Preparation of old decorated plastered or unplastered wall surfaces and applying one coat of cement base paint on wall surfaces

M&L for Preparation of old distemper surface by washing, rubbing down and stopping of distemper and painted surface and applying one coat oil bound emulsion on wall surfaces white or tinted and application of paint through mechanical means complete all as specified and directed.

All as per item No - 50 above but one coat of Oil bound distemper on ceiling surface complete all as specified

M&L for Preparation of old plaster surface of wall applying one coats of ACE exterior emulsion paint on wall surfaces. Note wall surface made smooth and application of paint through mechanical means complete all as specified and directed.

M & L for Preparation of old painted surfaces of wood and wood based materials of any description over 10 cm width or girthnot otherwise described and applying one coat of synthetic enammel paint with spray painting machine complete all as specified and directed.

All as per Item No-53 above but on steel surfaces

S&F in repair PVC 32mm dia waste pipes all as specified and directed

Dismantling water tanks 500 ltrs all as specified and directed

S & F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks triple layer,white colour (Cylindrical vertical with closed top) hoisted and fixed in position including dismantling all as specified in SSR Part I complete all as specified and directed

S & F Rotational moulded polye thylene water storage tanks cover (cylindrical vertical with closed top) fixed in position all as specified and directed

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity exc 250 ltrs n. exc 500 Ltrs and disconnecting existing tanks settign aside (or lowering if required) for repairs, cleaning etc and hoisting if reuiqred reconnecting and refixing in position. all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity exc 500 ltrs n. exc 1000 Ltrs and disconnecting existing tanks settign aside (or lowering if required) for repairs, cleaning etc and hoisting if reuiqred reconnecting and refixing in position. all as specified and directed.

S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) of bore of pipe 15mm complete all as specified and as directed.

S&F in repair Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) of bore of pipe 20mm complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S&F Waste fitting brass chromimum plated 32mm dia, for wash hand basins etc with long screw shanks & fly nuts, plain end, bedded in red lead cement and other end fixed all as specified and directed.

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Supply and fixing 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Supply and fixing 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

S&F in repair HEALTH FAUCET (ABS body) mild steel chrominium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making fixed in position complete all as specified and directed. as in repairs complete all as specified and as directed.

M&L for Cutting chases brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends and making good cutting exceeding 20cm girth for concealed water tubing or concealed conduit wiring, etc.complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) and including fixing of the following components viz. pedestal pan with "P" or "S" trap, seat and cover for pedestal pan, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper fixed as in repairs complete all as specified and as directed. Note:- Flushing cistern and flush pipe as required shall be measured and paid for under supply only separately.

S&F in repair Vitreous china wash basin, white, flat back, size 550mm x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and including fixing of the following components viz. pillar taps, waste fittings and union, plugs and chains and connecting upto supply pipes, wastes or traps, screws, plugs, cement mortar and other subsidary materials required for fixing including cutting for and pinning in ends of brackets but exclusive of fixing of supply and waste pipe fixed as in repairs complete all as specified and as directed. Note:-(a) Pillar taps and waste fittings as required shall be measured and paid for under supply only separately. (b) Supply and waste pipes as required shall be measured and paid for separately.

S&F in repairs Vitreous china squating pan " Orissa pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) incl P or S trap connection to trap, and to flushing pipe anti syphonoge pipe etc incl making good to floor complete all as specified and directed

S&F in repairs PVC valve less, syphonic action type, white low level flushing cistern of capacity 10 litre with inlet ball valve float and handle including brackets and 32 mm dia PVC flush pipe complete all as specified and directed

S&F Towel Rail 600mm long of aluminium fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 270 gms) as in repairs complete all as specified and as directed.

S&F in repair grating doom 100mm dia of CP (Minimum weight 60 Gms) complete all as specified and directed

S & F Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm as in repairs complete all as specified and as directed.

S & F PVC connections 15mm size with PTMT nuts of length 450mm as in repairs complete all as specified and as directed.

S&F in repair 15 mm Bib tap long body with wall flange fancy type chromium plated brass screwd for iron pipe with capstain head complete all as specified and directed

S&F in repair brass Chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union as in repairs complete all as specified and directed.

S & F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe 15mm fixed as in repairs all as specified and as directed.

S&F in repair waste fittings, brass, chromium plated for glazed ware basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of bore of pipe 32mm all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).

S & F of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S & F of 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

M&L for Welding in repair thickness of metal to be welded exc 20mm but nexc 25mm size of length exc 2.5 cm but n exc 5 cm in length

Supply and fixed in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications.

Supply and fix in repair vitreous china wall hung wash hand basin with pedestal snow white miniumum size 630mmx450mm including chromium plated brass coupling, bottle trap, chromium plated brass centre hole basin mixer, 450 mm PVC braided connection (two numbers), angular stop cock (valve) (two numbers) complete all as specified in particular specifications.

S&F in repair stainless steel curtain rods with PVC lining 20mm dia complete all as specifed and directed.

S&F in repairs curtain brackets stainless steel with PVC lining matching with the curtain complete all as specifed and directed.

S&F in repair fancy type glass corner shelf with CP brackets etc complete all as specifed and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm (minimum) wide with chromium plated brass bracket guard and railing 600mm long complete.

S&F soft rubber beading size 35x4mm fixed with nails or suitable adhesive complete all as specified and directed.

S&F in repair 18mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality of both side plain white colour rigidlam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides top and bottom and shelves inside the cabinet complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cupboard accessories i.e. fittings, handles, hinges, will be measured and paid for seperately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

S&F in repair 18mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters fixed with screws, solvent cement/adhesive as per manufacturer instructions complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cupboard accessories i.e. fittings, handles, hinges, will be measured and paid for seperately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Colour and design of prelaminated portionshall be as approved by GE. (iv) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

S&F in repair 12mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality of one side plain white colour rigidlam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet back complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Modular kitchen accessories i.e. basket, cutlery baskets, fittings, handles, hinges, will be measured and paid for seperately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

Supply only autoclosing hydrolic (soft closing) chrome finish stainless steel hinge openable at 110 degree complete.

Supply only 100mm long stainless steel (grade S-304) handle fancy type polished bright chrome finish complete.

Supply only 200mm long stainless steel (grade S-304) handle fancy type polished bright chrome finish complete.

M&L for Resecuring without taking down frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm including replacing rubber neoprene packing, screws, putty and securing hinges except replacement of inserts as in aluminium doors all as specified and as directed.Note:- Supply only hinges and inserts as required shall be measured and paid separately.

M&L for Resecuring without taking down frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm and not exceeding 4.0 sqm including replacing rubber neoprene packing, screws and securing hinges / pivot set except replacement of inserts as in aluminium doors all as specified and as directed.Note:- Supply only hinges and inserts as required shall be measured and paid separately.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.

S&F Pre painted galvalume aluminium zinc coating GI base plain steel sheet 0.50mm thick (TCT) of an colour having minimum tensile strength of 550 Mpa as ridge in roof fixed with self tapping screws as specified in particular specifications. Note :- (i) Outer colour of sheet shall be as approved by GE based on availability from manufacturer. (ii) Work shall be executed by the manufacturer's authorised Vendor only.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100m all as specified and as directed.

M&L 75mm thick for PCC 1:3:6 type C-1 as in plinth protection , complete all as specified and directed

M&L for PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregates) as in roof kerbs, Chajja of window/ventilator or mud stops, rounded or chamfered on top of chajja & edges of surfaces upto the height of 7.00 mtr including demolition of PCC etc complete all as specified and directed. {The rate is deemed to be inclusive of scaffolding/form work}.

All as per item No. 41 above but except bricks (Bricks shall be obtained from demolition. Rates for segregation of old bricks, stacking, cleaning etc. shall be included in this item.)

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 M mean radius built in CM (1:4) complete all as specified and directed

All as per Item No 114 here-in- before but except bricks (using old serviceable bricks)

Taking down cement plaster of any description including racking out joints, hacking for key, scrubbing down with water etc and prepare to receive new plaster complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:4) on external surface fair/other than fair faces of brick wall /concrete surfacefinished even and smooth without using extra cement etc complete all as specified and directed with mixing of WPC @ 3% by weight of cement or as per manufacturers instruction.(Note : WPC shall be measured and paid seperately as supply only under respective items of this Schedule)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 300mmx300mmx 7 to 8 mm thick(square/ rectagular) joint free as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing shade tile laid over and including 15mm thick screed bed layer in CM (1:6) etc complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350 x250x 7 mm/ 450x 350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile including 10mm thick rendering in CM (1:4) complete all as specified and directed.(Premium quality).

Supply only Intergral water proofing compound.

M&L for Keyed pointing in cement mortar (1:4) to brick wall of drains complete all as specified and directed.

M&L for PCC (1:4:8) type D-2(using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in surface channel and drain finished surface even & fair complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete with using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed. (inner girth only measured)

Add or deduct from item No. 124 for each 25mm girth or part thereof over or under 30cm inner girth (inner girth only measured).

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in beching and coping, bed block lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Dismantling of mild steel or structural steel work including doors, gates, but excluding framed truss and dismantling of CI work and removing complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shoulders or reveted, forged into spikes, framed guard bars, railings, ladders and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

All as per ser item No 128 above but fixing only

Demolition of reinforced cement concrete of any description and in any position as in ground foors all as directed by Engr-in-Charge

M & L for Reinforcement cement concrete pre-cast reinforcement cover slab (1:2:4) type B-1 using( 20 mm graded crushed stone aggregate) as in manhole cover of any size including RCC ring/Frame and MS frame set in CM (1:4) etc complete all as specified and directed.

M&L for TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of grey cement rubber moulded glossy finish and no pigment, any shape and size confirming to IS-15658-2006 of 80mm thickness, M-40 grade laid over and including 30mm thick sand cushion complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of grey cement rubber moulded glossy finish and no pigment, any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade laid over and including 30mm thick sand cushion complete all as specified and directed.

All as per item No 135 above but fixing only.

M&L for preparation of new concrete/brick/stone or plastered surface of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer etc complete all as specified and directed.

M&L for Preparing new plastered wall surfaces and applying Two coats of cement base paint on wall surfaces over one coat of primer complete all as specified and directed.

M&L for Preparing, plastered or unplastered of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

De-silting and cleaning of existing rain water drain and removing the earth / sand / silt and shrub and other materials etc complete to a distance exc. 250 m but n. exc 500 mtr and depositing where directed at a level n. exc. 1.5 m above the starting paint complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

S&F for mild steel work as in posts or struts in fencing including cutting tops to shape as directed ,drilling holes, notching for wire etc flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

All as per item No 142 above but fixing only

M&L for two coats of synthetic enamel paint on new steel surfaces of any description over and including a coat of red oxide primer including preparation of steel surface complete all as specified and directed.

M&L for preparation of old steel surfacses of any description and applying one coats of synthetic enamel paint etc complete all as specified and directed.

S&F in repair for galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining fixing to any type of strandard rail straining bolts,including securing or tying at crossing with provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured)

All as per item No 146 above but fixing only

S&F in repair chain link mild steel galvanized fencing of mesh size 50mmx50mm and not less than 3mm dia hot dipped GI wire fixed and binding with GI wire complete all as specified and directed.

M&L for Cleaning and clearing of underground sewage line (including manholes by taking off manhole covers and re-fixing the same after cleaning) of any description underground any depth by removing any type of blockage including de-silting and de-chocking manually by providing rodding and flushing after cleaning including clearing of manholes and as directly by Engineer-in-Charge, from the following size/bore of sewage lines :-

(a) Upto 150mm bore pipe.

(b) Exceeding 150mm bore but not exceeding 300mm bore pipe.

Material and labour for cleaning of blockage manually by rodding, pumping etc and removing the deposited sludge/solid/liquid material, outside MOD land, complete all as directed from the following :-

(a) Water Closet (Indian or European), trap & CI pipe line upto first Manhole.

(b) Floor/Nanhi trap of Kitchen/Bathroom upto gully trap (excluding gully trap).

(c) Gully trap upto first Manhole.

Excavation in soft/loose soil for getting out puncturing or existing damaged/broken or otherwise nonfunctional salt glazed stone ware pipe 100mm dia bore (length of pipe 60cm) and supply and fixing salt glazed stone ware pipe of 100mm dia bore grade 'A' ISI Marked incl PCC 1:3:6, Type C-2 bed and haunching as required incl jointing with existing line, returning, filling in and well ramming the soil and removal of surplus spoil to a distance n. exc 50 mtr and deposited where directed etc complete all as specified.

All as per item No 152 here-in before but bore of pipe 150mm

Excavation in soft/loose soil for getting out puncturing or existing damaged/broken or otherwise nonfunctional RCC drain pipe (one peace) 300mm dia bore and supply and fixing RCC drain pipe 300mm bore class NP-2 with collars etc complete incl PCC 1:3:6, Type C-2 bed and haunching as required incl jointing with existing line, returning, filling in and well ramming the soil and removal of surplus spoil to a distance n. exc 50 mtr and deposited where directed etc complete all as specified.

Dewatering of septic tank and manholes any size and cleaning by taking out sludge from septic tanks and monholes of any depth, in foul conditions and confined places, getting out and removing the sludge to a distance exc 250m and n. exc 500m and deposited where directed in and including borrow pits and covering the borrow pits with 20cms thick layer of soil complete all as specified and directed.

S&F in replacement vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) including plastic seat cover and making good the floor with adjacent floor finishing and making connection to flush pipe etc complete including making functional and removal rubbish/waste materials to a distance n.exc 50m etc complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (one piece type) ivory with PVC sheet cover & flushing cistern, flushing pipe), including making good the floor with adjacent floor finishing and making connection to flush pipe etc complete including making functional and removal rubbish/waste materials to a distance n. exc 50m, complete all as specified and directed. Make of WC : ( Hindware Cat No 92043 (INOX) and CERA-COMFY Cat Part No 2075)

M&L for Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device as in repair complete all as specified and directed.

S&F in repair 10 liter PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe and 600 mm long PVC connection complete all as specified and directed.

S&F in repair vitrous china urinal, bowl type of size 410x355x265mm(back or corner wall type),complete including providing and fixing plugs,bedding urinal against walls in ceemnt mortar 1:2,securing urinals to plugs with and including 60mm long brass screws,pointing around urinal backin cement,fixing automatic flushing cistern with brackets,flush pipe grating and union for discharge pipe(exclusive of fixing supply pipe to flushing cistern,trap and waste pipe compete

M&L for cutting into existing manholes of internal dia 100mm for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for internal dia of pipe 150mm complete all as specified and directed.

All as per item No 161 here-in before but internal dia of pipe 300mm

S&F for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .

M&L for 100mm dia Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

M&L for 75mm dia Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair 100mm dia Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) etc complete all as specified and directed.

S&F in repair 75mm dia Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) etc complete all as specified and directed.

S&F in repair 100mm dia Cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors etc complete all as specified and directed.

S&F in repair 75mm dia Cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors etc complete all as specified and directed.

S&F for 110mm bore PVC soil waste/Vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed. (Excavation and earth work shall be measured and Paid separately).

all as per Item No 170 herein before but 75mm bore of pipes

S&F for 75mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door etc. complete all as specified and directed. (in Repair)

S&F for 110mm dia PVC (SWR) junction single, (Single T) equal or unequal with access door etc. complete all as specified and directed. (in Repair)

M&L for repairs to sunken portion/floor including demolition of existing PCC,WC,P/S Trap and removing the material outside MD land and cleaning with the wire brush to dry and applying one coat of URP in cement in ratio 1:1 @ 1liter per Sqm. After drying of this process applying two coats of pidifin2K @ 01 liter/Sqm for two coats and minimum time gap between each coat is 4 hours and 15 mm thick rendering in CM 1:4 including finished even & smooth without using extra cement complete all as specified and directed. Notes:- (a) Area of measurement will be floor area which includes side walls of the sunken portion (a) The pidifin2k chemical treatment shall be carried out by authorized technicians of Dr Fixit (b) 10 years written guarantee (from the certified date of completion of work) shall be obtained from the Dr Fixit and submitted by the contractor.

M& L for cement concrete type E2 1:5:10 (40mm graded stone aggregate) as lean concrete in filling / Mass concrete complete all as specified and directed

Excavating in trenches soft/loose soil n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out complete all as specified and directed.

Excavating in trenches soft/loose soil n. exc 1.5m wide and exc 1.5m in depth but n.exc 3 meter ; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and exc 1.5m but n.exc 3m in depth and getting out complete all as specified and directed.

Returning filling in soft /loose excavated soil including spreading leveling watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing surplus excavated soil/earth to a distance not exc.50M and deposited where directed at a level not exc.1.5 M above the starting point.

M&L for salt-glazed stoneware drain pipe grade 'A' 100mm bore, ISI marked, jointe with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed.

M&L for salt-glazed stoneware drain pipe grade 'A' 150mm bore, ISI marked, jointe with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed.

M&L for concrete bed (40mm graded stone agg) to drain pipes 100mm dia including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 using complete all as specified and directed.

M&L for concrete bed (40mm graded stone agg) to drain pipes 150mm dia including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 using complete all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.

bharat construction

M/S SATISH KUMAR

FRIENDS N FRIENDS

Mohit Enterprises

M/S Shivam Industries

M/S Rakesh Singh