SPL REPAIR/REPLACEMENT OF OVER HEAD ACSR CONDUCTOR WITH UG CABLE, CONNECTED ITEMS AT OTM ACCN AND PROVN OF COVERED SHED FROM BLDG NO T 29 (OFFICE COMPLEX) TO P 15 (OR LINES) AT DINJAN MIL STN UNDER GE DINJAN

Amount

Excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer n.exc 25 cm, watering, and removing surplus soil to a distance n.exc 50 mtr and making good surfaces in hard standing or hard/dense soil complete all as specified and as directed.

M&L for Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface with Broken stone or boulders complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for brick work with old size flyash bricks straight or curved on plan exc 6 meter mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class 'B' burnt clay bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. steel conforming to Fe 410-W (Gde-E-250) quality A complete all as specified and directed.

S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, steel conforming to Fe 410-W (Gde-E-250) Quality A complete all as specified and as directed.

S&F for mild steel screw bolts of 11 to 15mm dia of shank (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 5cm long complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating (AZ-150) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating (AZ-150) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as sub base of flooring complete all as specified and directed.

M&L for 60mm thick Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 M-35 grade, laid as directed to any shape complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 15mm thick screed bed or bedding layer of cement morter (1:6) for laying of floor finishes complete all as specified and directed.

M&L for coloured 450x350x7-8 mm thick glazed ceramic tiles on vertical surfaces such as skirting, dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick backing coat in cement mortar (1:4) , complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L for rendering 10 mm thick wall on other than fair faces of brick work or concrete surfaces in cement mortar in (1:6) and finished even and smooth (without using extra lime or cement) complete all as specified and as directed.

M&L for rendering 20 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10mm thick each layer) in cement mortar in (1:4) using water proofing compound in top layer and finished even and smooth (without using extra lime or cement) complete all as specified and directed. Note: Water Proofing Compound measured and paid separately.

Supply only liquid Water Proofing Compound ISI marked of approved make complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of cement primer on wall complete all specified and directed.

M&L for applying three coats of white wash on new Wall surfaces including preparation of surface, complete all as specified and directed.

M&L for preparing of new steel surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

E/M Works Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, cable trench etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, cable trench etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning filling in with excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed.

M&L for clear sand cushioning with dry clean sand for protection of cable, 15cm below the cable and 8cm above the cable, complete all as specified and as directed. Note : Punned thickness shall be measured for payments.

Supply and laying unreinforced precast concrete cable cover class LV, type 1, flat size 250 x 150 x 40 mm for cable protection, complete all as specified and as directed.

S&F Sub-Class B brick, well burnt, laid breadth-wise along the axis of Cable laid in Trenches over Sand Cushion for laying UG Cable Protection, complete all as specified and as directed.

Boring of holes horizontal for laying pipe (minimum depth 0.75 mtr from top level) under the road pavement, hard standing using trenchless technology complete all as specified and as directed. Note : Cost of accessories required for making hole/bore deemed to be included in the quoted rate.

S&F RCC cable route indicator with embrossing mark as LT cable, of size 75 cm x 15cm x 7.5cm alongwith foundation size 75cm x 30 cm x 30cm complete all as specified and directed.

Supply, laying, jointing, commissioning and testing cross-linked polyethylene (XLPE) insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 70 sq.mm 3.5 Core, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items. (2) Excavation and earth work shall be measured and paid separately complete all as specified and directed.

All as per Item No.33 here in above but for of size 50 sq.mm 3.5 Core.

All as per Item No.33 here in above but of size 35 sq.mm 3.5 Core.

All as per Item No.33 here in above but of size 25 sq.mm 3.5 Core.

All as per Item No.33 here in above but of size 25 sq.mm 2 Core.

All as per Item No.33 here in above but of size 16 sq.mm 4 core.

All as per Item No.33 here in above but of size 16 sq.mm 2 core.

All as per Item No.33 here in above but of size 10 sq.mm 4 core.

All as per Item No. 33 here in above but of size 10 sq.mm 2 core.

M&L for GI pipe light grade with all fittings complete grouted in ground all as specified for 32mm bore of pipe laid in trenches/fixed with poles/laid in road/plinth/floor for protection of cable complete all as specified and directed.

All as per Item No.42 here in above but of size 50 mm bore.

All as per Item No.42 here in above but of size 80 mm bore.

Dismantling/taking down old aluminium steel reinforced (ACSR) conductor of any size any type from LT overhead line including all jumper, cross arms, clamps, bolts, nuts etc and keeping serviceable materials in safe custody for reuse in the work complete all as specified and as directed

Dismantling cross-arms of M.S. channel or angle sections etc. complete and stacking aside serviceable materials for re-use with in 50m and removing unserviceable materials from site of work complete all as specified and as directed.

Dismantling the all cable from panel, poles, MCB Main DBs taking out the cable loop stretching out the cable, carrying out end termination with new lugs, proper thimbling, fixing the joint kits connecting back to the new/existing panel board by means of nuts, bolt & washers of any size any type complete all as specified and as directed. Note : (i) The work includes necessary excavation to take out the loop and laying the cable, putting proper cable protection bricks using the old retrieved bricks and refill the area properly and spreading any surplus soil. (ii) The cost of AI lugs, joint kit shall be measured and paid separately under respective items.

Supply, jointing and testing XLPE cable straight through joints including jointing materials and accessories complete, hot shrinkable outdoor cable joint kit suitable for XLPE 1100 Volts (Earthed) cable of size 70 Sqmm to 150 Sqmm 3.5/4 Core complete all as specified and as directed. Note : Excavation and earth work shall be measured and paid separately.

Supply, jointing and testing XLPE cable straight through joints including jointing materials and accessories complete, heat shrinkable outdoor cable joint kit suitable for XLPE 1100 Volts (Earthed) cable of size 25 Sqmm to 50 Sqmm 2/3.5/4 Core complete all as specified and as directed. Note : Excavation and earth work shall be measured and paid separately.

Supply, jointing and testing XLPE cable straight through joints including jointing materials and accessories complete, hot shrinkable outdoor cable joint kit suitable for XLPE 1100 Volts (Earthed) cable of size 10 Sqmm to 25 Sqmm 2/3.5/4 Core complete all as specified and as directed. Note : Excavation and earth work shall be measured and paid separately.

S&F PVC cable Junction Box IP66 "halogen free and weather proof" for out door installation size not less than 200 x 150 x 100 mm suitable for street light incoming and outgoing cables up to 10 to 25 sqmm 4 core (with terminal) & inclusive of MCB SP 10 Amp, 60A 04 strip aluminium Bus Bar, including nuts,bolts,cable glands & MS clamps fixed to pole complete all as specified and directed.

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire unarmoured, electric control cables (Heavy duty) with stranded Aluminium conductor of size 1.5 sq mm ,2 core, 1100 Volts grade passed throuh PVC conduit medium grade of size Min 20mm complete all as specified and directed.

M&L Earthing complete with Galvanised steel earth plate 60cmx60cmx6mm thick electrode, buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 m below ground level , connected to GI earth strip 25 X 4mm up to test point by means of bolts ,nuts , check nuts and washers of GI including excavation and earth work, PCC 1:3:6 type C-1 pit, 20mm dia GI pipe medium grade, watering pipe and 20 mm bore GI pipe, light grade for protection of earth strip, MS angle iron frame 40x40x3mm, 10mm thick RCC 1:2:4 type B-1 cover reinforced with 6mm dia MS bars @ 75mm C/C both ways and with MS handle made out of 12mm dia bars, PGI Funnel, wire mesh etc complete all as shown in electrical Plate No 03 of SSR Part-I and connected to earthing test point all as specified or indicated including testing on completion complete and including taking down old u/s.

Supply, install, testing and commissioning outdoor type LT panel of size 1.2m x 1.2m x 0.6m , factory made totally enclosed dust and vermin proof , double steef shutter in front and single leaf shutter in rear side made of 3.15 mm thick CRCA sheet, duly fabricated with latest IP-65 and having proper locking arrangement with magnetic door closing system, neoprene gasket and gland packing at cable entry/ exit point in both front and rear door painted with powder coated paint and Aluminium bus bar 400 amps suitable for 500 volts, 50 Hz , 3 phase 4 wire system and comprising with and including following accesories and mounted on PCC platform type CM(1:3:6) painted with white/red colour all around the panel board complete with the following items:- (Main Panel NO-I) unit area. Note : Foundation to be included in the quoted price Incoming :- (a) MCCB, 4 Pole, 250 Amp, 415 V, 25 kA (I/C) - 01 No., Thermal magnetic release. (b) 3 Phase LED Voltmeter Cl-1 (c) Phase indicator lamps (RYB) -set of 3 (d) Aluminium bus bar 4 strip - 400 amps (e) Internal connection by Aluminium strip from mcb/mccb to busbar and busbar to MCCB/MCB etc Outgoing :- (a) MCCB, 4 Pole, 100Amp, 415 V, 25 kA - 03 Nos, Thermal magnetic release. (b) MCB,TPN, 32A, 240 V, 16 kA - 05 Nos. (b) MCB,TPN, 63A, 240 V, 16 kA - 03 Nos. (For street light and 01 extra)

Supply, install, testing and commissioning outdoor type LT panel of size .6m x .6m x 0.5m , factory made totally enclosed dust and vermin proof , double steef shutter in front and single leaf shutter in rear side made of 3.15 mm thick CRCA sheet, duly fabricated with latest IP-65 and having proper locking arrangement with magnetic door closing system, neoprene gasket and gland packing at cable entry/ exit point in both front and rear door, painted with powder coated paint and Aluminium bus bar 200 amps suitable for 500 volts, 50 Hz , 3 phase 4 wire system and comprising with and including following accesories and mounted on PCC platform type CM(1:3:6) painted with white/red colour all around the panel board complete with the following items:- (Bus bar panel Panel). (a) (a) MCCB, 4 Pole, 100Amp, 415 V, 25 kA - 01 Nos, Thermal magnetic release. (b) Aluminium bus bar 4 strip -200 amps having hole drilled on bus bar for fixing of cables (c) Internal connection by Aluminium strip/Wire from mcb/mccb to busbar and busbar to mccb/mcb etc Note : Foundation to be included in the quoted price

M&L for plain cement concrete (1:4:8) type D-2, using 40mm graded stone aggregate as in foundations of stay assembly, poles, strut etc complete all as specified and as directed.

Dismantling of insulators of any type from LT poles of any size and type and setting aside complete all as specified and as directed.

Dismantling of GI earth wire 4.0mm or any size complete all as specified and as directed.

M/S A K ENTERPRISE (BID ID -3381183)

M/S R D CONSTRUCTION (BID ID -3381511)

ABOTANI ENTERPRISE (BID ID -3381361)

M/S AUTOMOTIVE WORLD (BID ID -3382174)

M/S S. P. ENTERPRISE (BID ID -3381016)

FREEZCON (BID ID -3381374)

M/s PRABIR ENTERPRISE (BID ID -3381885)