Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.5 LAccepted-AOC | ₹25.5 L Quoted ₹25.7 L | L1 | Accepted-AOC low |
| 2 | L2₹26.1 L+₹35,210.90 (1.37%)Rejected-AOC FAZILKA | PUNJAB | 152020 | ₹26.1 L+₹35,210.90 (1.37%) | L2 | Rejected-AOC high |
Tender Value
₹18.3 L
EMD Value
₹36,587
Closing Date
29 Jul 2024, 12:00 pmClosed
EXECUTIVE ENGINEER
EXECUTIVE ENGINEER Ropar Canal and Ground Water Division WRD Punjab
Prov. and Fixing SS 200mm, 350mm NRV Incl. Class 150,300 Flanges, Champ Rubber Join, Etc. Compt. In All Respt, Rep. of Air vessel Chamber, Provid. NP2 Pipe Drain In Nard Massewal Pump House For Commis Lift Irrig. Sch RD 32300/L Of ASHC Shri APS Block
2024_WR_123917_1
11/22A/2024-25
Open Tender
Civil Works - Lift Irrigation Schemes
Item Rate
180 days
SHRI ANANDPUR SAHIB
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,000
Yes
₹36,587
Yes
26 Nov 2024
15 Jul 2024
29 Jul 2024
16 Jul 2024
29 Jul 2024
16 Jul 2024
Amount
Providing & Fixing Stainless Steel Class 150 BS 1868 NRV/Check Valve 200mm ISI marked and as per IS 5312/2004 Including Flanges, Champion Rubber Join Etc, All Fittings Complete In All Respect. Body Cover & Hinge CS ASTM A 216 Gr WCB Disc-CS WCB +13% Cr., Body Seat Ring – SS CA15/CS WCB +13% Cr. Washer, Hinge Pin & Split Nut-SS AISI 410, Gasket-Spiral Wound SS 304+Graphoil Filled Body Studs-ASTM A 193 Gr B7, Body Bolts-ASTM A194 Gr 2H Gland Packing-Graphoil, Ends- Flanged Drilled to ANSI B16.5, CL300. Quality to the satisfaction of engineer in charge.
Providing & Fixing Stainless Steel Class 150 BS 1868 NRV/Check Valve 350mm ISI marked and as per IS 5312/2004 Including Flanges Champion Rubber Join Etc, All Fittings Complete In All Respect. Body Cover & Hinge CS ASTM A 216 Gr WCB Disc-CS WCB +13% Cr., Body Seat Ring – SS CA15/CS WCB +13% Cr. Washer, Hinge Pin & Split Nut-SS AISI 410, Gasket-Spiral Wound SS 304+Graphoil Filled Body Studs-ASTM A 193 Gr B7, Body Bolts-ASTM A194 Gr 2H Gland Packing Gland Packing-Graphoil, Ends- Flanged Drilled to ANSI B16.5, CL300. Quality to the satisfaction of engineer incharge
Providing & Fixing Steel Class 300 BS 1868 NRV/Check Valve 350mm ISI marked and as per IS 5312/2004 Including Flanges, Champion Rubber Join Etc. All Fittings Complete In All Respect. Body Cover & Hinge CS ASTM A 216 Gr WCB Disc-CS WCB +13% Cr.,Body Seat Ring – SS CA15/CS WCB +13% Cr. Washer, Hinge Pin & Split Nut-SS AISI 410 , Gasket-Spiral Wound SS 304+Graphoil Filled Body Studs-ASTM A 193 Gr B7, Body Bolts-ASTM A194 Gr 2H Gland Packing-Graphoil, Ends- Flanged Drilled to ANSI B16.5, CL300. Quality to the satisfaction of engineer incharge.
Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation (For water post) Earth work excavation
Cement Concrete 1:4:8 with brick 40 mm gauge size.P.C.C. 1:4:8 mixed by mechanical means
First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth.
12.5mm thick cement plaster 1:4
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in postion complete.
Providing, lowering precast concrete NP-2 Plain end pipes and colar with reinforcement, in trenrcthes to correct gradient and alignment, cutting of reinforcement cement concrete plain end pipes, stringining in trenches, jointing ends and fixing colar with cement mortar 1:2 as per IS 458:2003 into trenches for al depths and laying out same ot correct alignment, gradients, levels etc. complete ni al respect. RC Pipe NP-2 500 mm i/d pipe
Front End loader 1 cum bucketcapacity
Lubricants Grease (2 kg packing)
Lubricants Grease Mobile oil (5 ltr packing)
Paints, distempers, oil and primer etc. (b) Oil (i) Turpentine oil
Any Other Items
THE NAV NIRMAAN COOP L AND C SOCIETY LTD
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .